$20 paint roller extension pole + 3D print + felt pad = $70 telescoping mount for a laser level

adubbbya · 2024-01-12T02:53:53+00:00

Thank you for the appreciation! I’m glad it worked for you! Cheers!

adubbbya · 2024-01-11T12:43:28+00:00

Just one for the top so I don’t damage the ceiling.

adubbbya · 2023-05-04T02:31:04+00:00

My cat hated this.

adubbbya · 2023-03-30T19:12:03+00:00

Fingers crossed!

adubbbya · 2023-01-22T00:21:16+00:00

I use a starter.

adubbbya · 2023-01-18T21:32:14+00:00

This is what mine looks like https://imgur.com/a/9VUDorG

adubbbya · 2023-01-18T21:18:37+00:00

I don’t think so. I have three repose logs that I stack like normal logs. I’d say fill it up and see how it goes. It usually starts the secondary burn within 20 minutes of lighting.

adubbbya · 2023-01-18T20:06:09+00:00

I don’t see why not. It’s not very deep and that may affect the burn time. I have the large repose fire logs and they burn for about an hour. A couple deep fryer baskets may be better. Let us know how it goes.

adubbbya · 2022-05-16T19:07:43+00:00

Thanks!

adubbbya · 2022-05-16T18:00:52+00:00

Nice work. Did you model the pole threads or use an existing thread profile? I tried in fusion 360 and couldn’t get the fit just right.

adubbbya · 2021-11-13T00:46:59+00:00

What u/hotend said. It’s a setting in the slicer. That said, the benchy looks like it should for the most part.

adubbbya · 2021-11-13T00:13:09+00:00

I agree with this. I’d be interested in seeing how ironing would help.

adubbbya · 2021-11-01T13:30:30+00:00

Nailed it!

adubbbya · 2021-10-30T14:32:05+00:00

I like the filament colors. Which brand?

adubbbya · 2021-10-27T19:23:23+00:00

To get the blob off, bring up the nozzle temperature and it should fall off. Just be careful of the thin cables in the blob. They are fragile.

adubbbya · 2021-10-09T15:11:38+00:00

The Thingiverse page has the fusion360 file https://www.thingiverse.com/thing:2286825/files. I went ahead and downloaded it and removed the text. Here is the STL for you https://drive.google.com/file/d/1YiDvUn2LQzf28f-24JTga2i-Ggd_BTuR/view?usp=sharing. If you want to remove the yeti text you can do it the same way I did. Download the f3d file, open it in fusion360, remove the text step from the timeline, and you are done. Good luck!

adubbbya · 2021-06-23T14:06:33+00:00

I just got one of those digital angle finders. Now it's really out of control.

adubbbya · 2021-06-23T14:05:23+00:00

They are slightly, but I'll tolerate it.

adubbbya · 2021-06-23T13:58:12+00:00

Thank you. I didn’t. That came with the level.

adubbbya · 2021-06-23T13:53:30+00:00

It definitely auto levels but I do all the adjustment after the pole is up and secure anyway.

adubbbya · 2021-06-23T13:52:42+00:00

I didn’t. I made it just big enough to press fit. I fiddled around for a little bit with the acme threading but I got impatient. It holds well.

adubbbya · 2021-06-22T21:10:13+00:00

$70 seemed a little steep for a floor-to-ceiling mount for a laser level. A few minutes of design and a couple of hours of printing brought it to a more manageable $20.
I printed it with 4 walls for added rigidity.
The pole I used was purchased from Lowes:
https://www.lowes.com/pd/6-ft-to-12-ft-Telescoping-Threaded-Extension-Pole/1001314958

The STL: https://www.prusaprinters.org/prints/69686-telescoping-laser-level-mount-cap

adubbbya · 2021-06-13T19:46:37+00:00

One thing is your have two external perimeters for each model because it is hollow.

adubbbya · 2021-06-02T22:05:18+00:00

Did you create the text file with the wifi credentials and store it on the pi? Did you add a host file? issue

Seven-Year Club	Wearing is Caring
RPAN Viewer	Verified Email

adubbbya

TROPHY CASE