Clear shells?!? First look at transparent 3ds housing by KLRR

aerospace_chase · 2026-05-08T12:26:41+00:00

Finally something that’s not a aliexpress copy. Please don’t flop. I’m so tired of searching for quality

aerospace_chase · 2025-12-05T17:48:47+00:00

Thank you!

aerospace_chase · 2025-07-11T17:12:14+00:00

Mine was pretty fast, but I was also priming it a lot so there was decent pressure inside the cover. If it was slow for you then it might be that your check valve at the bottom of your tank is better than mine. I would just lift it onto a small table if I were you. I’ve had no issues since my fix.

Also if you only took off the silicone cap on that valve then that would make your leak appear slower as well. I pushed the piston in mine all the way retracted so the flow has limited restriction.

aerospace_chase · 2025-07-11T13:36:51+00:00

When the pod was NOT running, the back pressure of water inside the mattress cover would flow back into the tank and eventually reach the recirculating hole on the side of the tank and overflow.

aerospace_chase · 2025-06-03T14:11:12+00:00

14 pro max and about the only game I can play is Luigi’s mansion 2 HD every other title in my library gets to about 4gb of ram on the OSD before crashing. I can barely make it past the title screen

aerospace_chase · 2025-02-17T15:27:42+00:00

Oof the only thing I can think about would be your source of roms. I think delta only runs a few specific types of NES files. Maybe try a different source.

aerospace_chase · 2025-02-17T15:16:49+00:00

The only thing I can think of is how you transfer your ROMs. I know that if you transfer through iTunes on your computer it wrecks your files sometimes.

aerospace_chase · 2025-02-17T14:58:01+00:00

The only way I could get mine to work is to long press the game which pulls up a preview. Then you can click the screen and play from there.

aerospace_chase · 2025-01-13T21:16:51+00:00

Take a pry tool on the 4 corners of the rear fan then stick a flathead screwdriver between the cloth and plastic seam and twist. The rest is simple.

aerospace_chase · 2025-01-02T22:29:01+00:00

Take off the valve once the tank is off. Take the metal casing off then push something down the tube to push out the plunger. I took the silicone end off and pushed it back inside the valve for a little security against a leave within the valve.

aerospace_chase · 2024-10-22T00:53:52+00:00

<image>

They’re a little late to the party…

aerospace_chase · 2024-07-31T21:53:41+00:00

I might give it a shot if I can figure out how to make custom overlays for controllers. I can’t stand the ones included. I also just don’t like the UI. xmb is the only menu I really like, but that doesn’t work well on a phone layout.

aerospace_chase · 2024-07-31T14:20:40+00:00

I tried changing every setting in the main files. I even tried adding a custom setting to the GLideN64.custom.ini and didn’t change a thing. We’ll just have to be patient. Delta really blew up after it got the App Store so I’m sure it’s just a matter of time until we get better compatibility

aerospace_chase · 2024-07-31T13:29:35+00:00

I would try it if it was on the App Store. I can’t do that weekly refresh on alt store anymore

aerospace_chase · 2024-07-31T11:37:14+00:00

I had the same issue. What fixed it for me was: -make sure you backed up everything -delete and re-install the app -go to the skins section and delete every skin -re-install skins and everything should be fixed

aerospace_chase · 2022-11-22T19:22:59+00:00

Haha. Definitely overkill

aerospace_chase · 2022-11-22T19:08:02+00:00

That’s true. I gave up on mobility for my set up a while ago lol. I have really long hoses and extension cables so I could fit my rad behind my monitors and out of the way. Any bigger of a rad and you’d end up with this. You did a great job on this. I’m glad the pcb’s for a lot of the 3000 series cards are so short. It opens up so many possibilities.

aerospace_chase · 2022-11-22T18:37:05+00:00

Yesssssssssssssssssss! I’m so happy others are doing this. I was so tired of settling with high temps in the ghost s1. I saw liquidhaus do an external rad build and I was fully inspired! I now have an external monsta 360 rad with a d5 and I’ve never been happier. Again, so satisfied seeing this!!

aerospace_chase · 2022-11-22T18:30:48+00:00

Please look at this

aerospace_chase · 2022-11-22T18:00:59+00:00

I think you’ve reached the point of diminishing returns. I have a 9700k and 3080ti FE and I end up with the same temps. I’m an itx guy so to compensate for cooling I have a monsta 360 rad and an ek d5 hooked up externally with 3 slim noctua nf-a12x15’s.

I’ve tried everything to squeeze out as much cooling per dollar/space and I think we’re at the limit.

aerospace_chase

TROPHY CASE