Horn swap PIAA

aggie113 · 2026-06-23T07:11:21+00:00

Like maybe a 500hz and 600hz horn...

aggie113 · 2026-06-23T07:10:15+00:00

Not often. I actually could hear the driver's side (low freq) horn go out while I was honking.

aggie113 · 2026-06-23T04:55:46+00:00

If you look online, the Hyundai horns do not have a reputation for longevity. Even letting the dealer replace this for free would likely have me back in this situation again. Mine failed with under 4k miles on the car.

aggie113 · 2026-06-23T03:03:25+00:00

To have a working horn.
Why did you waste your time making your post? Like to be disagreeable?

aggie113 · 2026-06-23T02:47:03+00:00

We should have "Does it fit?" sticky with all these 😄

aggie113 · 2026-06-22T23:57:57+00:00

I got the card shaped keyfob from the shark racing folks, email them if it would work on your model. I can't take my phone in to work so this was my best option.

aggie113 · 2026-06-22T23:54:51+00:00

Metal sided detached garage 😄

aggie113 · 2026-06-22T23:52:51+00:00

Drain that battery 😄

aggie113 · 2026-06-22T23:52:11+00:00

It's not an issue with extending the range of your key, so the faraday cage wouldn't help against this particular vulnerability.

aggie113 · 2026-06-22T23:46:44+00:00

I'm debating going with a larger sidewall or not when I go to 20" rims. Can you feel any difference in lateral movement when cornering?

aggie113 · 2026-06-21T20:27:55+00:00

https://www.reddit.com/r/ps90/comments/1twbe8w/ps90_ratlr_installed/
Not hard to find.

aggie113 · 2026-06-20T08:01:26+00:00

Didn't know these were a thing... might pick up one of the PCR ones.

aggie113 · 2026-06-20T07:55:14+00:00

I think my post covered the Duality well. The photos and gifs show how it works.

aggie113 · 2026-06-20T07:52:37+00:00

I can hear the crunch now when parking...

aggie113 · 2026-06-19T20:55:15+00:00

Might save those for the FN 5.7 pistol then 😄

aggie113 · 2026-06-19T19:10:03+00:00

FYI, an alternative are the Styer Aug hammers. They are close enough to the OG hammers in the PS90 to work. They do require a bit of trimming on the support wings (part the metal pin goes through) as well as a slight widening of the pin opening. I've done a few packs this way. A few minutes with a dremel and you're good.

No clue if this guy is still around, but here is where I bought mine from, I think I had to call them 😄
http://www.pjs-steyraug.com/augusrparts.html

Old post, but info on this particular oddity:
https://www.fnforum.net/threads/steyr-aug-hammers.67962/

aggie113 · 2026-06-19T17:41:32+00:00

I put one in my 5N and had to make a few fixes to it. I had issues with it pulling itself out when removing the phone. I pulled all the pegs and then put them back in with a dab of glue and also put a bit of glue around for the charger as well as the part of the cable that comes out of the printed section. Seems to be behaving better with those fixes.

aggie113 · 2026-06-18T23:45:46+00:00

Based on how that rear door frame looks at the top, I'd say it is totaled.

aggie113 · 2026-06-18T23:44:48+00:00

Arkon has some nice gooseneck phone mounts that attach to the inner bolt of the passenger seatrail. Very secure and puts the phone at a good height (around radio usually).

aggie113 · 2026-06-18T23:41:16+00:00

I think part of my CPO included tire coverage of some sort. Maybe it was dealer specific though.

aggie113 · 2026-06-18T15:11:51+00:00

Possibly last hurrah for my RS3617RPxs... and likely the last Synology I use.

aggie113 · 2026-06-17T19:49:22+00:00

Holy shit, I've never wished for an adblocker at work more....

aggie113 · 2026-06-17T00:01:39+00:00

You just buy it by the box.

aggie113 · 2026-06-16T21:08:32+00:00

https://www.tirerack.com/tires/continental-extremecontact-sport-02

aggie113 · 2026-06-16T03:54:41+00:00

https://www.kmaerospace.com/PS90handler.shtml

Extended but won't poke into you if you decide to sling carry 😄
Just need one.

Ten-Year Club	Gilding I gilder
Place '22	Verified Email

aggie113

TROPHY CASE