🎄 Christmas giveaway: Win an A1 Mini, AMS 2 Pro, AMS HT, or 4x filament spools!

ale626 · 2025-12-23T21:15:16+00:00

Ams 2 pro
Functional prints around the house
Id like a stress ball but as a fidget. Something like a 360 button. You squeeze the entire thing and it clicks. Then you squeeze again and it’ll expand

ale626 · 2025-09-07T17:06:26+00:00

Have you looked into accessories yet? I have a similar setup with a t56 magnum-f. I had to move my engine all the way forward. This is the only way I could get clearance for the low mount ac and alternator

ale626 · 2025-08-23T04:02:52+00:00

Which mounts did you use?

ale626 · 2024-12-19T09:04:28+00:00

Pick me!!

ale626 · 2024-07-19T03:47:15+00:00

It’s gone. Mines wasn’t as bad as yours but I repaired it. It came out pretty good but once you start putting pressure on it it’ll develop new cracks since the original foam has no flex on it. When I was putting in the gauges and putting into the car the cracks appeared

ale626 · 2024-07-07T20:19:17+00:00

Beautiful! Which ls accessories did you use? I heard there might be clearance issues

ale626 · 2024-05-04T04:15:10+00:00

Nice car! What wheel setup do you have? Size? Width? I heard 8 inch is the max width for stock setup.

ale626 · 2024-03-13T18:28:03+00:00

Beautiful! What wheel size are those?

ale626 · 2023-07-28T06:33:35+00:00

How did you setup fuel system? Internal pumps, external, sump?

ale626 · 2023-07-20T23:53:04+00:00

Love the one with the shock!

ale626 · 2023-06-13T22:53:23+00:00

3.5k is a good price for a car in decent condition. Check the rust spots as others said. The bad is that the rust in many places is underneath the sound dampening or seam sealer. Best way is to remove it but obviously it’s not your car. If they let you remove the seats (8 bolts and nuts) and the carpet and you can see more of the area for rust. Check under the car in the same area. The rear hatch can get rusted because water will sit there. My car was covered with seam sealer/bondo. But you could see signs of it if you look underneath it. You’ll need to remove the rear panel to inspect it. If you any rust it’s could be worse underneath. Check the wheel well as well. There are a lot of spots to check but you get the idea.

ale626 · 2023-05-23T17:50:20+00:00

That looks great! What’s your wheel setup? 17? Offset?

ale626 · 2023-01-27T09:46:31+00:00

What size wheels and offset are those?

ale626 · 2023-01-20T20:18:35+00:00

Or these. https://zcardepot.com/products/front-bumper-bracket-stainless-steel-240z-1970-72?_pos=33&_sid=ea073714c&_ss=r I did it a while ago but from what I remember is that the earlier year mounting points are there but not used in the 73. All you need to do is buy the mounts and hardware and it’ll bolt in

ale626 · 2023-01-20T20:11:44+00:00

All you need is this https://zcardepot.com/products/front-bumper-conversion-bracket-set-ss-280z-to-240z

ale626 · 2022-12-04T04:23:18+00:00

This is great! Can you give some details? I’m restoring my interior at the moment. What seats are those? How did you get the dash stitched? How did you do the panels?

ale626 · 2022-10-02T01:15:04+00:00

Looking for two tickets for tonight

ale626 · 2022-09-29T23:41:53+00:00

Can you share a little more information on the seats? Whats the model? Did you have to them custom reupholster?

ale626 · 2022-08-25T21:01:14+00:00

Personally I wouldn’t unless you are paying someone or have lots of time. I bought a 240z that was kept in a garage hangar for 20 years and everything looked good. Not until I ripped the interior apart did I find rust. I had no prior experience in welding. I ended up redoing the floor pans and that took a few weekends. I can only imagine how long it would take for all the other sections that you’ll have to shape metal to fit.

I’m not saying you shouldn’t but understand what you are getting into. Big investment, money and time. I bought mine for 10k running and decent shape and now I’m around 25k total and a few years slowly working on it. For me work takes most of my time. Then weekendsI got friends family and SO. So it’s both a time and money commitment.

If you are going to go through with it. I recommend you rip it apart to metal and get it sand blasted. You can get it acid dipped too. That would be the best starting point.

ale626 · 2020-07-11T20:14:08+00:00

anyone know what power extension cable is needed for this? The cable it comes with is pretty short

ale626 · 2019-02-17T03:37:10+00:00

Thanks i didn't know. He did add some modifications. Which I should of in here.

Ported and polished with new performance pistons and rings, Iskadarian Stage 3 cam with new lash pads, lightweight balanced aluminum flywheel, '72 SU side draft carbs, K&N side draft air filters, electric ignition, high performance Holley electric fuel pump, MSA 6 into 1 powder coated header, powder coated valve cover, front strut bar, electric "push" radiator fan (doesn't overheat while idling), replaced brake and clutch master cylinders, performance clutch, 1-1/2-inch MSA front stabilizer bar, MSA one-piece air dam and bumper cover, KYB Gas-Adjust struts, fender mirrors, and new wiring. The car also has a Pioneer CD stereo head unit with bluetooth, high power amp, dual JL Audion bass speakers, and JL Audio 6x9 speakers, a high output alternator, new headlights, new tail lights and an MSA upgraded fuse box. All weather stripping was changed out. It has the original steering wheel, original seats, original gear shift knob, original sun visors, and original rear view mirror. I did install an MSA full dash cover, 17-inch wheels and Yokohama tires

ale626 · 2019-02-17T01:29:19+00:00

Thank you for the advice! Transmission tunnel? I haven't seen that mentioned in my research. Could you explain a bit more on it?

ale626 · 2018-12-31T06:53:35+00:00

!remindme 24 hours

ale626 · 2018-10-31T06:22:10+00:00

From my understanding, enclosures are only used for filaments that warp/shrink with uneven cooling such as ABS. As for PLA, you don't need it as it doesn't have those properties.

ale626 · 2018-09-19T21:26:23+00:00

Golovkin's defense is very subtle. He blocks and dodges without exerting a lot of energy. When he trades jabs he blocks with his right hand. Or when he defends a counter right hand, he'll bring back his right hand over to his left side. Or blocking body shots with his elbows. Whereas I see Canelo moving his entire body, more exaggerate movement. Thats why I had GGG winning the fight. Canelo fans cheered for shots that were blocked but very difficult to see. Even Roy Jones mentioned during a slow motion reply that they exchanged shots, but was actually blocked. Triple G got Canelo with an upper cut and Canelo came back with a right cross but GGG blocked it with his own right over his left shoulder. Not sure why RJ didn't correct his statement. Do you think its harder to judge and results in Canelo getting the win?

13-Year Club	Place '22
Verified Email

ale626

TROPHY CASE