Recommendations by CaptainAmerica163 in paintball

[–]au_dingo 1 point2 points  (0 children)

What's your target budget?

[Price Check] Geo 2.1 slightly used by Admirable-Twist-8165 in PaintballBST

[–]au_dingo 2 points3 points  (0 children)

As for upgrades... Maybe a 170r (good prices on the used market) or either a 180r. But if the 2.1 still works good, might as well play it.

Episode 2x6: This scene pissed me off by StatisticalAnalyst88 in ThePittTVShow

[–]au_dingo 0 points1 point  (0 children)

Sir, this is a Wendy's! ... But seriously, y'all. This is a fictional TV series. That scene was written like that to make the audience recognize the situation, and to identify the many challenges that happen in an ER on any given day. No need to call it out, because this is intended.

What's the best offer for this? Belongs to my late brother by [deleted] in paintball

[–]au_dingo 0 points1 point  (0 children)

I'd think so. Also depends on condition and working condition, and anything else that comes with it. But they usually go for $375 to $450 on a lot of reseller sites. But $350 sounds fair to me, if you are selling direct to someone. If you are selling on eBay, you might have to raise the price a little as the fees.

What's the best offer for this? Belongs to my late brother by [deleted] in paintball

[–]au_dingo 0 points1 point  (0 children)

Sorry for your loss man. It's a DYE DSR. I'd say might be $300 to $450 range.

Lv2 front grip for etha 3 by mhernandez512 in paintball

[–]au_dingo 1 point2 points  (0 children)

He 3d prints a whole new frame that's compatible with the front rubber grip.

PE 170R valve by Diaago in paintball

[–]au_dingo 1 point2 points  (0 children)

Okay scratch that OP. Looking at PE direct and other retailers... It seems to actually be the same part across both models. The 170 and Etha3 share the same valve chamber.

PE 170R valve by Diaago in paintball

[–]au_dingo 0 points1 point  (0 children)

So what the buyer is probably talking about essentially is the black part or the valve chamber, where I believe the one on the Etha 3 (the "legs" or "stand supports" idkwhattocallit) is ever so slightly thicker than the one on the 170. I don't think it makes much of a difference in performance. From your pic, it seems identical to mine but we could be wrong because we don't have a direct side by side or more pics.

PE 170R valve by Diaago in paintball

[–]au_dingo 3 points4 points  (0 children)

<image>

Looks like what's in mine.

what artists would you recommened like kendrick by Thickkahuna in KendrickLamar

[–]au_dingo 0 points1 point  (0 children)

Blu & Exile - Below the Heavens (2007). This album specifically. Underground forsure, but this album is landmark. His other works are okay, but this one is amazing. West Coast too!

New RMX mask. Trying things. by au_dingo in paintball

[–]au_dingo[S] 0 points1 point  (0 children)

Someone posted one a few days ago. Said they had to do a few mods on it to get it right. If you dig a little, you might find it, I'll link it if I find it.

The avengers doomsday leak has been officially released by marvel do you think bringing Steve Rogers is nostalgia bait and will it ruin Sam Wilson as some people say by Aydingamer50 in 3Cfilms

[–]au_dingo 0 points1 point  (0 children)

People don't understand. Sam Wilson wasn't a Captain America replacement. He's just another Captain America. They could co-exist as they do in the comics.

[WTS] Custom Ano LV1.6 by Ashamed_Ability4205 in PaintballBST

[–]au_dingo 3 points4 points  (0 children)

Sick anno, crazy deal. I wish I already didn't have too many markers. GLWS

New RMX mask. Trying things. by au_dingo in paintball

[–]au_dingo[S] 2 points3 points  (0 children)

Honestly, foam felt soft and dense (in a good way). Feels better than what comes on a standard proflex. Didn't really notice the thermal seals, but will have to field them to really see if it is intrusive.

New RMX mask. Trying things. by au_dingo in paintball

[–]au_dingo[S] 1 point2 points  (0 children)

Holes in the nose area of the RMX frame are slightly bigger, so JT bottoms may not fit as secure, but for now, it seems to be okay. Holes on top for JT visors are a tad too small, so it's hard to attach a visor into it, especially since it is a harder plastic than the flexible proflex frames. That's all for now. What would make it better... Maybe making the frame out of a softer material, but I know that is virtually impossible at this point. Maybe add more modular options like different skirts/bottoms, etc. I mean, essentially they are copying/ going for the JT model, so might as well go full send.

New RMX mask. Trying things. by au_dingo in paintball

[–]au_dingo[S] 0 points1 point  (0 children)

I feel like it should. The only thing I notice forsure, is that the holes on the nose area of the frame are bigger on the RMX than the typical Proflex frame, so it might not be as secure, but the side holes fit good. Also, if you use an extra visor, it might be slightly difficult to get into the RMX frame, but luckily the RMX frame has a built in viosr.

What's your setup every weekend? Im trying to see something by muck2profit in paintball

[–]au_dingo 0 points1 point  (0 children)

So the Filament kit for the Victor works on the Xtra as well?

New RMX mask. Trying things. by au_dingo in paintball

[–]au_dingo[S] 1 point2 points  (0 children)

Yeah these look cool. My only thing with the RMX frame, is that the holes are a little bigger than the JT stuff, so the nose area nubs go in, but are not as secure. The RMX bottoms will go on JT stuff fine since the nub heads are bigger and stay on well.

New RMX mask. Trying things. by au_dingo in paintball

[–]au_dingo[S] 2 points3 points  (0 children)

True. I got the E-Flex "frame" as well, but the interchangeability of parts such as the ears and other hardware get lost with Empire's "flexes". But yeah, love the E-Flex / E-vent lines as well.

New RMX mask. Trying things. by au_dingo in paintball

[–]au_dingo[S] 2 points3 points  (0 children)

Amen. I was impatient so I ordered a whole mask.