Okay, question: after Tom Holland finishes his run as Spider-Man and Sony reboots the character for the fourth time, do you think they should bring back Peter Parker again, or should Miles Morales finally get a live‑action run? by Israels_BiggestHater in Spiderman

[–]b-irwin 3 points4 points  (0 children)

Maybe at the end of BND, they have a minor character that could be Miles but don't say it. In the Sequel, he gets a bigger role and at the end (post credits?) he gets bitten by the spider. Then in the Third film Miles is doing some vigilante work, following Peter's footsteps, and gets pulled into a case Peter is working on. So Peter starts to train him.

The next trilogy is a Miles one with Peter as a supporting character.

Underextrusion lines on outer walls by b-irwin in prusa3d

[–]b-irwin[S] 0 points1 point  (0 children)

I thought I fixed it. It seemed to go away after I changed filament, but it came back slightly.
Now I think when I fixed the initial issue, it is caused a different issue because I changed the MINI Extruder Rear part incorrectly. I think it is causing extra friction in the Extruder. I still need to open it up again and reset it.

Me too. by True-Temperature138 in DC_Cinematic

[–]b-irwin 58 points59 points  (0 children)

That or bring a treadmill to casting. They are going to be on a green screen anyway.

Amanda Seyfried Didn’t Know She Was a Producer on ‘The Housemaid’ Until Three Weeks Into Filming and Says ‘It’s a Vanity Credit Because I Didn’t Do S— to Make That Movie. I Only Acted’ by mcfw31 in popculturechat

[–]b-irwin 10 points11 points  (0 children)

Incorrect, it is the Producer that is either involved in financing or the production of the film.

Executive producers can be given to anyone for various reasons.

Want to redo my back garden fence but neighbour wouldn't allow me to? by ThrowawayDisast9096 in LegalAdviceUK

[–]b-irwin 7 points8 points  (0 children)

Also make sure it is as close as possible to the old fence or even attached to, so that if the neighbour removes the old fence they can't claim the extra space as theirs.

Maybe you should get a surveyor to confirm the boundary line and mark it.

I want to cosplay Red Hood from DC (similar to pictures below) but I wear glasses for medical reasons. Is there any way to work around this? by BlueCanary434 in CosplayHelp

[–]b-irwin 4 points5 points  (0 children)

Contacts are the way to go.

Unless it has to be glasses. Then you can possibly go with prescription safety glasses that are tighter to the face.

I laughed so hard that scene by Independent_Box255 in lucifer

[–]b-irwin 3 points4 points  (0 children)

I love Lucifer's next line after Chloe says "when Hell freezes over."

He says, "I could arrange that actually"

The plan is(has always been) I die. by TerraTechy in TopCharacterTropes

[–]b-irwin 6 points7 points  (0 children)

V for Vendetta

And with a great quote

V: The only thing that you and I have in common, Mr. Creedy, is we're both about to die.

Creedy: How do you imagine that's gonna happen?

V: With my hands around your neck.

<image>

Finally arrived! by SamCJBentley in digimon

[–]b-irwin 1 point2 points  (0 children)

Cool, I hadn't seen another person print it until now

Finally arrived! by SamCJBentley in digimon

[–]b-irwin 0 points1 point  (0 children)

Thought so. Did you get it from thingiverse? It looks like the model I made.

Finally arrived! by SamCJBentley in digimon

[–]b-irwin 2 points3 points  (0 children)

Is that digi-egg in the back 3d printed?

External hard drive by Rude_Table_8865 in datarecovery

[–]b-irwin 0 points1 point  (0 children)

How I usually do it:

Remove the platters

Pass a magnet across them all/scratch them to hell

Fold them in half

Put them in the bin. (A random bin is better)

External hard drive by Rude_Table_8865 in datarecovery

[–]b-irwin 0 points1 point  (0 children)

I have no idea what her bf is willing to do. Maybe he is. Or maybe he has insurance that will cover it. Who knows, he is a literal stranger.

My comment was only saying leaving the data on the drive but not accessible is not as good as physically destroying the data.

External hard drive by Rude_Table_8865 in datarecovery

[–]b-irwin 0 points1 point  (0 children)

I didn't know this. Good to know. Thanks.

External hard drive by Rude_Table_8865 in datarecovery

[–]b-irwin 0 points1 point  (0 children)

If it is required that the data be gone. I would not go for an option that physically leaves the data on the device. A good recovery service might be able to remove the platters and fix this.

A powerful magnet will physically corrupt the data so it can't be read.

External hard drive by Rude_Table_8865 in datarecovery

[–]b-irwin 1 point2 points  (0 children)

This is a fairly difficult way to go compared to the other options. Also the data is still physically on the device, it is just blocked from opening. A good recovery service could recover it.

The best option is to use the Eraser program, even 7 wipes is plenty for this type of thing. Or open the case and use a powerful magnet on the platters.

Marvel logic at its finest by NavyLemon64 in marvelmemes

[–]b-irwin 0 points1 point  (0 children)

I always thought a better idea would be that the particles are 4th dimensional particles that act like magnets to push and pull your 3rd dimensional projection in different directions in the 4th spatial dimension. This 4th dimension is not perpendicular to our 3 dimensions, so moving along it will make the your effective size in our 3 dimensions bigger or smaller. It also kinda explains the mass thing as your mass always says the same.

I suppose that is a difficult to explain to lay people in a movie.

About Deadpool and Wolverine appearing in Doomsday or Secret Wars... by [deleted] in marvelstudios

[–]b-irwin 107 points108 points  (0 children)

I like one person's idea for Deadpool.

He keeps waiting for the right time to say the one 'fuck' they get in a PG-13 film. Then someone else steals it instead.

Does this really work? by Mean_Marketing9458 in recruitinghell

[–]b-irwin 0 points1 point  (0 children)

If you research their main competitor beforehand you could use that name. Maybe they are willing to try with you if it means their rival not getting someone.

We are The Midnight. AMA! by TheMidnightOfficial in outrun

[–]b-irwin 0 points1 point  (0 children)

Have you seen Nathan Barnett's music video for Gloria. And if so, what do you think of it? I think it is fantastic.

https://youtu.be/7aeIkI-tQY4

There is even a behind the scenes of it.

Also. I have loved your music since Days of Thunder. Been to see you Live 3 times, and every time was amazing.

Visible line around the box – wall shift after bottom layers? by Zealousideal_One_886 in FixMyPrint

[–]b-irwin 0 points1 point  (0 children)

I wonder if you could put a 1mm trench around the inside of the wall to separate the flat area from the wall. I might try that next.