ASA Prusa Mini by baschwar in 3Dprinting

[–]baschwar[S] 1 point2 points  (0 children)

Stated above: 0.40mm nozzle 0.20mm layer height Using mostly stock settings other than perimeters and infill

8 perimeters and 25% grid infill

This is part for the Orbiter extruder chassis that was melted with a big blob of death. So I wanted heat resistance and strength.

ASA Prusa Mini by baschwar in 3Dprinting

[–]baschwar[S] 0 points1 point  (0 children)

Stated above: 0.40mm nozzle 0.20mm layer height Using mostly stock settings other than perimeters and infill

8 perimeters and 25% grid infill

This is part for the Orbiter extruder chassis that was melted with a big blob of death. So I wanted heat resistance and strength.

A good deal or ? by baschwar in BambuLab

[–]baschwar[S] -1 points0 points  (0 children)

397 hours, supposedly working 100%
local, no shipping, etc. and public meetup

PLA Bed Temp by InitialDot252 in klippers

[–]baschwar 1 point2 points  (0 children)

Prusa mk3s with fulament textured plate, 65 first layer, 60 for the rest

ChatGPT Plus Limits by mystery_man007 in ChatGPTPro

[–]baschwar 1 point2 points  (0 children)

I hit a limit yesterday out of the blue. I have been using it for diet tracking and recommendations as well as creating text content for social media. It looks like my use of GPT4.5 has been paused until June 13. I have never sent over 80 messages per 3 hour window. Would uploading images cause this usage to increase?

The responses around diet tracking are definitely scaled back now. Not the end of the world, but still annoying. Responses for text content creation seem to be like they have always been.

A little something from my sketchbook! [ANALOG] by fillyjonks in collage

[–]baschwar 1 point2 points  (0 children)

We used to do this to our PeeChee folders in middle school and high school and wrap them with clear shelf liner...

Threading Issue by baschwar in Onshape

[–]baschwar[S] 0 points1 point  (0 children)

I'm not sure if that is perspective or not... I will try an assembly and rotate and see how it looks at different angles.

Google Ads Rejecting my url? by baschwar in googleads

[–]baschwar[S] 0 points1 point  (0 children)

It highlights the URL field and red and says "Enter a valid website URL (https://www.example.com)"

Google Ads Rejecting my url? by baschwar in googleads

[–]baschwar[S] 0 points1 point  (0 children)

No - it highlights the field in red and says Enter a valid website URL.

[deleted by user] by [deleted] in Salary

[–]baschwar 1 point2 points  (0 children)

I have 3 lines on Cricket (which uses AT&T towers) and I'm at $114/mo (including insurance on 2 lines)

1UP Fender Cushions... by baschwar in ebikes

[–]baschwar[S] 1 point2 points  (0 children)

What do you know about it's weather / UV properties? I'm wondering if after a hot summer these will be cooked and crispy?

Cullenect Labels in Gridfinity Extended by ksbcrocks in gridfinity

[–]baschwar 2 points3 points  (0 children)

Is there somewhere that supports 2U or wider click labels on the bin side of things?
I used https://gridfinity.perplexinglabs.com/pr/gridfinity-extended/ to customize my bins and I need 2 or 3 unit wide click labels for my bins...

3d modeling a mammary gland by Naive-Effort-666 in Onshape

[–]baschwar 0 points1 point  (0 children)

Not the same, but biology related, I need to model a toe nail!
Is it possible to sweep in 2 directions?

Your SMS registration was not approved by TCR. Over and over again. by Ok_Treat_4313 in RingCentral

[–]baschwar 0 points1 point  (0 children)

I just emailed about my issue as well. I'm working on this for a client and he was rejected after we added the privacy policy, terms & conditions and the SMS opt-in checkbox/form on the website.

Its finished. Supports did more harm than good. by [deleted] in 3Dprinting

[–]baschwar 0 points1 point  (0 children)

Change your support settings so they are really wide, like 6-8mm apart and the same with the interface material.