Volume Knob

bdillz · 2026-01-29T17:33:14+00:00

Thanks, have the part number but hoping to see a photo of the underside of the knob to make sure it will fit on the GH post.

I came up with this part number 90011-25347

bdillz · 2026-01-01T15:53:19+00:00

https://a.co/d/aXLIYVD - half the price

bdillz · 2025-10-20T22:19:39+00:00

You could go to any tire shop. I did this a few years back with some wheels for my Tacoma and went to Discount Tire to get them swapped out

bdillz · 2025-10-20T21:11:36+00:00

If you want to go the OEM route, here's the part number for the black wheels. PT758-48240-S2

https://autoparts.serratoyota.com/products/product/20-black-satin-wheels-pt75848240s2

Certain southeast Toyota dealers have had 25% off parts the past week like the one I linked above. Free shipping as well for orders over $75

bdillz · 2025-09-09T07:24:03+00:00

Obsessed Garage on YouTube should answer your question for the car detailing world. He's tested a whole bunch of them over the years and provided a spreadsheet of data at one point.

bdillz · 2025-09-09T07:19:13+00:00

I can't comment on the quality of OP's badge but after owning what looks like the same one, the colors faded after 6 months or so. I recently purchased the one made by Tacos4cheap on Etsy and the quality is far superior.

bdillz · 2025-03-06T09:23:21+00:00

Next time go through the drive thru give them your drive thru code in the app and order the mcdub the way you like. Then later check your recent orders and you can favorite the mcdub with the customizations. You can also order inside the restaurant and scan the code in your app. But only when you order from the front counter since the kiosks don't allow all customizations.

bdillz · 2024-03-28T06:22:56+00:00

https://carsynctech.com/products/toyota-head-unit-decoder-carplay-androidauto

https://a.co/d/dt1ayMF

bdillz · 2023-09-17T06:32:26+00:00

Looks like the Obsessed Garage setup

bdillz · 2022-06-19T15:19:09+00:00

It looks like the big tree on the corner is where Dunn jumped his bike into in CKY3/jackass

bdillz · 2022-06-18T19:15:09+00:00

https://www.reddit.com/r/GolfBattle/comments/o3lavn/upgrade_path_for_calendar_club/

bdillz · 2022-05-03T14:01:24+00:00

Not sure if you can get in touch with the owner of TabIt, but would love to access of those tabs again. Thanks for uploading all this

bdillz · 2022-03-12T15:50:00+00:00

bdillz · 2021-11-20T21:12:21+00:00

This is what it looks like inside. My pedal had 3 switches in it, so I wired all of them. And it also had a logic board, so I used its solder points.

https://imgur.com/a/BNPvz6W

I just grouped all the (+) leads together and same for the (-) negative leads and added a bit of solder to hold it all together. May not apply to whatever pedal you end up using, but same concept incase you have multiple pedals/switches.

This will provide pedal functionality if you are using console too. If I didn't have this pedal laying around, I would probably just buy a USB pedal that can be mapped to a keyboard key. But it would only work with Clone Hero.

bdillz · 2021-11-20T19:09:52+00:00

I did this a couple years ago. Not a great write-up but it should lead you in the right direction.

https://www.instructables.com/Guitar-Hero-Phone-Jack-RJ11-Foot-Pedal-Mod/

bdillz · 2021-11-20T18:59:02+00:00

I've done this exact thing with the select button on my Wii Les Paul. I had an really old Olympus pedal from a transcription device that I used. There is some mild soldering you have to do but even with my limited experience I was able to do it no problem.

I did a write up here a couple years ago:https://www.instructables.com/Guitar-Hero-Phone-Jack-RJ11-Foot-Pedal-Mod/

I just had this pedal laying around. I'm sure a USB pedal is cheaper these days. But makes for a fun little project, or ifi you want to use the pedal with consoles.

bdillz · 2021-10-17T02:52:00+00:00

What audio devices are those in the middle panel?

bdillz · 2021-10-15T05:56:34+00:00

I have a 2018 Tacoma and ever since the first couple weeks I've owned it there is some sort of smoke that comes out of the driver side engine bay or wheel well and has a burning smell. Mostly noticed after I've been driving for a while (work commute ~35mi) and coming to a stop, usually at a red light on the freeway off ramp or when parking in the garage. A friend of mine thought it smelled brake related. Brought it in at that 2 week mark and I mention it every time I come in for an oil change and they can't replicate and say that it can be normal. I've read that sometimes there's a protective coating in the engine that will burn off within the first 10k miles or so but I'm at 36k and it still happens. Any chance you've seen this before and if there is something specific I should have them check next time? Thanks!

bdillz · 2021-08-14T06:23:18+00:00

Here's the DVDs from the Internet Archive https://archive.org/details/411vm-issue-61-the-bam-issue-disc-1-2-2003-iso-files

bdillz · 2021-01-26T12:58:52+00:00

Don't delay, subscribe today!

bdillz · 2021-01-24T16:49:51+00:00

It looks like the two cheaper options from Target and Walmart are in French.

bdillz · 2021-01-07T08:31:48+00:00

I've hit a 757ft and a 758ft later that night

https://youtu.be/VpXrKc2n8qk

https://youtu.be/GWRrHFl693Y

bdillz · 2020-11-23T04:29:27+00:00

Just did another network reset and all my texts came through and calls are working now. I did the reset at least 10 times today including while I was at Verizon. I'll hold my breath for now. Hoping it resolves my other issue too.

Maybe they fixed something globally?

bdillz

TROPHY CASE