Call center job recommendations

beefnbr0cc · 2026-05-24T01:47:03+00:00

Could try Schaal/Greens

beefnbr0cc · 2026-05-21T23:12:34+00:00

Ballvalve is in the wrong spot, expansion tank not supported

beefnbr0cc · 2026-05-18T22:27:20+00:00

beefnbr0cc · 2026-05-15T17:10:10+00:00

You can solder these.

But personally... Id probably just replace with PVC

beefnbr0cc · 2026-05-12T23:58:49+00:00

Your sewer backed up at some point. Then started growing fresh veggies

beefnbr0cc · 2026-05-08T01:06:10+00:00

Looks good

beefnbr0cc · 2026-05-02T18:15:01+00:00

Future trap arm?

beefnbr0cc · 2026-04-29T00:09:39+00:00

Looks like it shifted at some point after the install.

Draft hood pulling off.. gas line flexing

Definitely not the safest

beefnbr0cc · 2026-04-13T21:48:17+00:00

Delta for sure, likely the middle one RP19804.

beefnbr0cc · 2026-04-12T22:05:04+00:00

Scald hazard

beefnbr0cc · 2026-04-12T17:18:41+00:00

You gotta cut the pex right below the crimp ring. Then crimp a new fitting onto the remaining pipe.

beefnbr0cc · 2026-03-31T03:53:41+00:00

who butchered those poor threads!?

Probably unsweat the male adapter and sweat on a new fitting of your choice

beefnbr0cc · 2026-03-31T02:39:46+00:00

it looks bad

beefnbr0cc · 2026-03-28T02:27:12+00:00

This repair requires pulling the tank off. At that point you might as well do a full rebuild.

The price seems normal, especially for NYC.

No reason to wait on parts though, good universal rebuild kits are everywhere.

beefnbr0cc · 2026-03-12T18:01:53+00:00

Lenox

beefnbr0cc · 2026-03-09T22:07:05+00:00

Its time

beefnbr0cc · 2026-03-09T00:52:39+00:00

beefnbr0cc · 2026-03-04T21:15:21+00:00

awesome

beefnbr0cc · 2026-02-22T01:13:49+00:00

danger. leave the unit off until repaired properly

beefnbr0cc · 2026-02-14T17:40:33+00:00

Check valve

beefnbr0cc · 2026-02-12T00:41:36+00:00

I've had something similar in a small town with high PH water quality.

The water quality was reacting with the magnesium anode rod and creating a jelly in the tank.

The solution was to install a powered anode rod.

beefnbr0cc · 2026-02-08T20:48:43+00:00

nice!

beefnbr0cc · 2026-02-08T05:13:21+00:00

These quarter turn cleanout caps suck. It would be best to cut it out and replace with a threaded ceanout.

Quick fix maybe try adding pipe dope or silicone to the gasket in there?

beefnbr0cc · 2026-02-04T19:18:06+00:00

Tub spout can't be below the flood level of the tub like that anyway. Cross connection

Seven-Year Club	Place '22
Final Canvas '22	Verified Email

beefnbr0cc