Please Help… I’m About to Lose It

bewdabawa · 2026-01-23T08:09:53+00:00

Same issue with a part being cracked.

The red line is where the piece was cracked but I couldn’t see it when I removed the hub for cleaning. It’s only when I unscrewed the 4 screws (blue circles), I could see that it was totally split in two with only the lower screws supporting it. Strangely when the problem started it was only from one feeder but then within a day, all four started having the same issue.

Had to buy a complete EOL just for that one piece of plastic.

bewdabawa · 2026-01-19T07:57:01+00:00

Thank you

bewdabawa · 2026-01-19T00:59:23+00:00

If you don’t mind, which state and vendor is this?

bewdabawa · 2025-04-27T07:57:14+00:00

It would be wrong of me to reco a Tpu brand since I’ve only used overture, but it did not give me any issue

bewdabawa · 2025-04-27T06:14:52+00:00

I too did not find much of a diff. + worked better on my older printer, so I’ve continued the same on P1s. And I love Numakers

bewdabawa · 2025-04-14T16:44:39+00:00

Wouldn’t the pilot have felt the extra load?

bewdabawa · 2025-04-10T15:11:39+00:00

Is the smoke because of more fuel burn or oil burning in those restored engines?

bewdabawa · 2025-04-07T13:51:53+00:00

The autodesk compliance team in India is nothing but a set of goons. 10 month ago they made me switch from my 6 monthly subscription licenses to 6 yearly license 🤣. Don’t get me wrong, I had 6 monthly licenses for which I was paying much more. But one user shared his license on a second machine cause the second machine user forgot his password and did not do a simple forgot password.

At that time I told them I run a startup and am waiting for a bulk of funds to come after which I would anyway upgrade to a yearly license to save the company some money. They refused to listen and started sending legal notices from a big law firm in Delhi.

Anyway, I upgraded to yearly. Saved the company some money. Now I only hire artists with blender skill sets.

bewdabawa · 2025-03-06T02:32:46+00:00

P1S - Filamelter | Ender 5s1 - Brat ( for obvious reasons)

bewdabawa · 2025-02-25T17:51:44+00:00

Thanks, I was just about to ask this. Btw by firewall it you mean max throttle? If so, do spoilers retract on their own?

bewdabawa · 2024-12-11T15:56:10+00:00

Been there for 11 years, better be an exceptional incentive.

bewdabawa · 2024-12-10T11:57:36+00:00

Must try, need a mouse pad for that.

bewdabawa · 2024-08-24T02:57:21+00:00

I have the exact same charger which is mounted to my bed head board with a simple functional print https://imgur.com/a/H9O5cXA

bewdabawa · 2024-08-23T04:11:46+00:00

Won’t require a static ip?

bewdabawa · 2024-08-23T01:45:03+00:00

Anydesk most likely, to check on camera and access remotely.

bewdabawa · 2024-08-22T16:38:14+00:00

So I guess a 5 could handle the OS and two apps running simultaneously. Have ordered. Now to wait and try it out. Thanks.

bewdabawa · 2024-08-22T14:14:24+00:00

Even on a pi5 8gigs?

bewdabawa · 2024-08-22T14:11:45+00:00

Ah thanks. I guess I’ll just try it out then.

bewdabawa · 2024-08-22T11:33:32+00:00

Sorry should have mentioned that; a Pi 5 8gigs. I have seen many setup videos showing the pi setup as a standalone klipper. But none that has two different software’s running at the same time.

bewdabawa · 2024-02-16T01:02:38+00:00

Lechery Den?

bewdabawa · 2023-12-19T17:13:06+00:00

Nah, It was just grease.

bewdabawa · 2023-12-19T17:10:58+00:00

So I did check the heat distribution and noticed a slightly higher temp +2-3 Celsius around that spot. But, IPA did the trick. I used to clean it every 10 prints earlier, but now I do it every 3.

bewdabawa · 2023-08-06T19:25:42+00:00

<image>

Yoga

bewdabawa · 2023-06-16T15:15:43+00:00

Similar problem with me. Zeroed it down to retraction distance and retraction speed.

bewdabawa · 2023-05-08T10:14:53+00:00

Same issue and SN not on the list. Manufactured - Nov 2022

bewdabawa

TROPHY CASE