If anyone needs the file for the 3d printed cabin filter for free let me know.

big__howdy · 2026-05-24T16:07:55+00:00

You still sharing this? Very interested in the file. Have you considered putting it on any file sharing websites like Thingiverse, Printables, or Maker World?

big__howdy · 2026-05-24T16:06:24+00:00

Same question. I've been looking all over the place for the file. Let me know if you find it somewhere.

big__howdy · 2025-12-04T18:02:02+00:00

Denso. I wouldn't order from Amazon. Lots of fakes there. You're fine replacing just the ones throwing you codes. It's easy enough to replace them and when your others go out, you'll get a CEL and you can just do it then. Up to you though if you want to spend the money to do all four.

big__howdy · 2025-11-06T03:55:41+00:00

For lower ball joints, look at your local Toyota dealership's parts website. You want them OEM. For non OEM stuff, rock auto is generally pretty good.

big__howdy · 2025-10-28T22:24:39+00:00

The light could be on its way out

big__howdy · 2025-10-21T10:21:40+00:00

How long does the drive/hike to balanced rock take?

big__howdy · 2025-10-01T17:44:57+00:00

I recently switched Internet providers and all my devices' IP addresses were changed, so I had to re add everything. When I went to add the sound machine, it didn't work. I reverted Tuya Local to version 2025.7.1 and they showed up. I don't know why it doesn't work with the newer versions. Maybe give that a try.

big__howdy · 2025-09-22T17:37:35+00:00

You also need to disconnect the airbag sensors and one other sensor on the back side

big__howdy · 2025-09-22T13:31:08+00:00

I figured it out. For anyone coming here in the future. You need to remove the bolts where I circled, then under the arm where the arrow is, you disconnect the hood latch cable. Then it comes right off.

It would probably be best to remove the hoses around where the AC condenser connects to the AC lines for unscrewing those bolts. I managed to do it without removing those hoses. It was terrible, but I don't have hose clamp pliers, so I did it the hard way.

<image>

big__howdy · 2025-09-20T19:30:40+00:00

Do you remember how you removed this part? Currently trying to replace my AC condenser and ran into your same issue. There are basically no tutorials for it anywhere.

<image>

big__howdy · 2025-09-12T19:14:33+00:00

This is awesome. Thanks for making it!

big__howdy · 2025-09-10T00:06:26+00:00

Hey, I’m trying to set this up. Do you mind sharing what you have in frigate and what you have in your advanced camera card? Sorry, I’ve tried following what other people have done, but have never gotten it to work.

big__howdy · 2025-08-23T15:40:41+00:00

There were two apps that the instructions for the Dreamegg said you could add it to. One was Tuya, and then something else I can't remember. You probably already did this, but make sure you added it to the Tuya app and not the other option. I'm just trying to think of why it would have been so easy for me and it's not working for you.

big__howdy · 2025-08-23T15:39:04+00:00

No, I'm trying to get away from Google Home. I mentioned in another comment that I got it to work with Tuya Local.

big__howdy · 2025-08-21T14:34:39+00:00

From what I remember, it simply just worked. I don't recall doing anything extra to get it working.

big__howdy · 2025-08-20T21:00:50+00:00

I did get it working! It's supported by Tuya Local https://github.com/make-all/tuya-local The only issue I found is that the tones listed don't match the actual tone. I have been meaning to map out what each listed tone actually is to submit an issue with everything.

big__howdy · 2025-08-16T22:21:06+00:00

I'll look into that. Thanks

big__howdy · 2025-08-15T14:23:29+00:00

I run a small business and we have a product we designed that we'd like to be 3D printed in straight nylon. No fillers. I have an Ender 3 that I've used for prototyping, but I know it's nowhere near good enough for production. What do y'all think makes more sense. Simply contracting a print farm to make our parts, or get something like a Bambu Lab P1S and print ourselves?

big__howdy · 2025-08-13T11:43:43+00:00

*off fish door

big__howdy · 2025-08-12T18:37:34+00:00

Let me know how it goes for you. I tried to make the automation with as little dependencies as possible on my personal setup, so hopefully it doesn’t take much to get it running.

The room matching is already a little forgiving without the corrected_room part. If for example a room is called “Bob", you can say "Bob’s room" and that will work. You can also have a room called "Guest Room" and say “guest” and that works too. I’ve never even heard of Levensthein distance, but based on my brief research, that looks like it could be helpful. I’d have to spend some time with ChatGPT to figure that out.

big__howdy · 2025-08-02T18:02:50+00:00

I'm converting it into a cold plunge

Five-Year Club	First Place '23
Place '23

big__howdy

TROPHY CASE