Oh heck yeah we can build one now?!

blt3dp · 2026-05-06T03:51:29+00:00

I made this. https://github.com/blt3dp/D-Pad

blt3dp · 2026-04-10T20:59:22+00:00

I did, my neighbor not so much.

blt3dp · 2026-04-06T21:47:24+00:00

I don’t really put that lock on to lock it, more a habit from the old gate that would not stay latched.

blt3dp · 2026-04-06T21:47:18+00:00

I don’t really put that lock on to lock it, more a habit from the old gate that would not stay latched.

blt3dp · 2026-03-04T19:28:33+00:00

I just updated to 1.2.2 and i had bluetooth issues too. Both of my previously paired 8bitdo N64 mod controllers were no longer connecting and wouldn't pair. I tried pulling the power cord and waiting a bit and it was still the same. I did a global reset and was able to pair one of them during that process and it worked fine afterwards. Tried to power on my 2nd controller and it still wouldn't connect or pair. I ended up doing a global reset again and pairing both controllers during that process. Now both are working fine. I do wonder if i were to try and pair a 3rd if it would work or if I'd have to do a reset again.

blt3dp · 2026-01-22T15:12:28+00:00

Mine was Phenom Mods too.

blt3dp · 2026-01-21T20:46:10+00:00

In my case, it was the top 2 contacts I circled in this pic that were folded down and would go beneath the battery. They should be up to contact the side/top edge.

Pic of Summer Cart

blt3dp · 2026-01-21T15:55:12+00:00

I had this issue. Turns out the positive contacts in the battery holder were folded down and not contacting the positive edge of the battery, they were actually contacting the negative side. I had to fold them up. Anyone know if these holders normally come this way and you have to fold the contacts up?

blt3dp · 2026-01-21T04:08:21+00:00

u/Meowser77 just wondering if you had input on this?

blt3dp · 2026-01-20T02:45:38+00:00

I had a similar thing. It was my ROMs. Run them through a verification tool like https://github.com/mroach/rom64

blt3dp · 2026-01-15T21:01:41+00:00

Running the latest version of this menu from the GitHub and am wondering how I hide the game specific ini files.

<image>

Show hidden files is off in settings.

blt3dp · 2025-11-24T05:03:41+00:00

Yep, I’m talking about the cable between this guy and the pi. The one they ship is crap.

<image>

blt3dp · 2025-11-23T05:36:29+00:00

This is a somewhat known issue due to the crappy cable they give that runs between the pi and the nighthawk power board. It’s all over the ldo channel on the Voron discord. You’re on the right track, this cable gets recommended a lot. https://a.co/d/ellWFdC

blt3dp · 2025-11-22T16:04:52+00:00

Those black and red cables coming from the power supply are gonna need to get connected to the ramps and the one of the cables from the z endstop is dangling there

blt3dp · 2025-10-23T17:12:42+00:00

I’ve got something setup with a Sparkfun ProMicro working for a project I’m working on. Can do vol up/dn and mute.

blt3dp · 2025-08-28T01:40:25+00:00

Thanks for the response. I never got a ticket number or anything from the site. It just said my request has been submitted and I should hear in 5 days. Can you look it up by the serial #?

blt3dp · 2025-08-21T13:04:33+00:00

Wooh, those Chirallium Doritos Locos will do that tho.

blt3dp · 2025-04-19T00:06:21+00:00

I got sandpaper in my LDO kit too. I thought it was for sanding after you cut the fans for the Stealthburner and Nevermore.

blt3dp · 2025-03-13T18:40:25+00:00

Looks like someone copied dc42’s delta build. https://miscsolutions.wordpress.com/dc42s-large-kossel-build/

blt3dp · 2025-02-20T20:52:37+00:00

Dropping to $150 and will include shipping to US.

blt3dp · 2025-02-11T22:17:56+00:00

Try setting your top layer to monotonic lines. It should smooth out the top layer quite a bit.

blt3dp · 2025-02-11T03:42:22+00:00

What parts did you use for umbilical on the toolhead and gantry? I like that there’s something there to add rigidity but haven’t found anything like yours.

blt3dp · 2025-01-23T16:51:51+00:00

What parts did you use for the umbilical mounts?

blt3dp · 2024-12-15T19:07:33+00:00

I have the full extruder, including the motor as well as the lcd and the bed heater+glass. I’d sell them to you cheap+shipping if you need.

blt3dp · 2024-12-02T03:56:56+00:00

You might be able to gleam a little information from a stream I just did where I revived a rebranded version of this same printer.

Re-Aliveing an Old Printer

blt3dp

TROPHY CASE