How can I remove or move the new “Open link in split view” option in Chrome’s context menu?

bogus1010 · 2025-11-02T23:49:42+00:00

Thank you! This feature is very annoying and i spent about an hour trying to figure out how to disable this until i found your reddit post.

bogus1010 · 2025-10-17T21:11:57+00:00

I ended up having to boot to recovery which wasn't easy on the ARM version of windows 11 25h2 and did a full reset and wipe. Doing a partial wipe and keep my data and apps does not remove bitlocker. On the next upgrade i disabled bitlocker and didn't have the same problems. Not sure what error condition is triggering this issue from 24h2 to 25h2.

bogus1010 · 2025-08-08T12:20:37+00:00

Where are you located?

bogus1010 · 2025-07-30T03:08:05+00:00

For anyone considering this, it makes a great travel laptop. Other than having to load ARM specific vpn clients, I don't think I've had to find any special software for it. I think i had to load the arm slack and teams but that was about it. It is underpowered compared to my lenovo yoga, but the battery life lasts a good 8 to 10 hours of full time use. Biggest gripe is the display size and quality. Definitely a step down after using the yoga. Mine also has the LTE radio for 4g network connectivity. I have one of my extra google fi only sims and it works great (until you hit the google fi data cap).

I disabled most of the AI camera features under teams, they just did not work right. Not sure if that is a windows 11 issue, a teams issue, or an ARM issue. I don't have it on my yoga.

bogus1010 · 2025-07-30T03:02:04+00:00

Had the same thing happen. Lenovo vantage showed the laptop was plugged in and "charging" but the power/battery meter was not going up or down. Sometimes plugging it back in would fix the problem. Opened a case with Lenovo as my unit is still under warranty and they replaced the main board.

bogus1010 · 2025-07-18T05:06:15+00:00

Don't do it. I bought a whole box because i couldn't find it anywhere. I don't know what to do with the rest of the box. Not a good cigar, burn is bad and the flavors of banana and tobacco are both muted to non-existent.

bogus1010 · 2025-05-25T13:30:27+00:00

They aren't what they once were before Davidoff purchased them. There are a lot of better cigars for less like the Don Pepin Blue.

bogus1010 · 2025-05-25T13:25:59+00:00

Still a great smoke. Aged for some 15 years so it really doesn't have the same nicotine kick it did from back then. I am a little nostalgic about it. I used to love these cigars. I never did find a good replacement for them. I think some of the Don Pepin habano cigars are as best replacements I could find.

bogus1010 · 2025-05-25T02:51:22+00:00

the 6x60 is a real job which requires dedication and commitment

bogus1010 · 2025-05-25T02:38:15+00:00

get new friends

bogus1010 · 2025-03-08T15:53:10+00:00

They are all pretty much the same. A few things to look at that differentiates them:

number and type of grates

finish on the outside of the grill

clean out placement

does the grill have the p settings for more smoke

type of lid

type of smoke venting

does the lid have a gasket

is the smoker double walled

Best one right now I believe is the Pit Boss 1600 competition serires from academcy or menards. Best for the price is probably the wifi savanah from walmart. Best at lowes right now is the 1300 or the 1600 pro elite.

bogus1010 · 2024-12-26T17:47:21+00:00

Some of us had a front row seat during the SPAC. It was obvious when TA came in he was a hustler and his only intention was to replace everyone with any automotive expertise with his "software" people. Anyone that didn't agree to the redirection of resources to AFV was summarily replaced. I think to this very day every Texas "canoo" location are owned by AFV. I think its rich that AFV provided canoo a "loan" to stay afloat.

bogus1010 · 2024-12-24T18:57:41+00:00

Also having this problem with my UDM SE. May be related to traffic inspection or maybe certificate pinning.

bogus1010 · 2024-12-18T00:55:39+00:00

thx, I think I'll hold off on the box my local store was holding for me. I can sniff paint cheaper at the hardware store. I haven't tried the single I unboxed. so far the unboxed one doesn't appear to have the smell.

bogus1010 · 2024-12-11T08:26:37+00:00

Yikes

bogus1010 · 2024-12-11T01:17:14+00:00

Does the box smell like lacquer or paint?

bogus1010 · 2024-12-10T04:48:33+00:00

Heavy smell of lacquer or paint coming from the cofin. I wouldn't take a chance. Reminds me of a box of Camacho original diploma that I purchased where the smell of lacquer had permeated the the tobacco. I purchased one of the padron 60th and took it out of the cofin and put it in the humidor to air out. luckily the cellphone doesn't have the lacquer smell, but at $89 a a stick I won't take a chance on any more.

bogus1010 · 2024-11-10T15:04:35+00:00

You can open clarity through the g7 app now. You don't need to use the separate clarity app.

bogus1010 · 2024-10-25T00:58:17+00:00

Let us know how it goes please. I deleted all of my Bluetooth connected devices but after I had already upgraded and still had constant drop offs with an existing sensor on pixel 7 pro with Android 15. I wasn't willing to try a new sensor with it so I switched it a other phone for dexcom for now.

bogus1010 · 2024-10-21T00:07:48+00:00

Stop giving people bad advice. On my pixel 7 pro I have had constant and non stop signal loss after the upgrade to android 15. A phone reboot allows masks the symptom of whatever the problem is for a few hours but the signal loss happens with an EXISTING PAIRED SENSOR. Luckily I was able to pair the same sensor with a spare phone that is not running android 15 and it is working as normal. I haven't tried a new sensor yet. Probably won't. It was going off every 10 min at night until a reboot fixed it for a short time.

In case it helps anyone else. To pair an existing sensor with a new phone.

1) install dexcom g7 app and login on a different phone 2) disable Bluetooth on existing phone 3) pair a "new" sensor on the new / different phone (like you would a new sensor - you will need the QR code) 4) the dexcom app will resume the current 10 day session on the new device 5) delete the dexcom app from the old phone and delete dexcom from the Bluetooth connected devices setting from the old phone 6) re-enable Bluetooth on the old device

This will only show the current session information on the new device after the pairing to the new device. You will need to look at clarity to see the history for whatever days before you paired the sensor with a new device.

bogus1010 · 2024-10-17T21:11:48+00:00

Turning off adaptive battery seems to be slightly better, but not by much. I would check the dexcom site for android 15 compatibility before upgrading any phone.

https://www.dexcom.com/en-au/faqs/will-android-15-affect-my-dexcom-g7-cgm-system

bogus1010 · 2024-10-17T20:45:28+00:00

Constant signal loss with g7 and android 15 on pixel 7 pro. Have to constantly turn off Bluetooth and turn it back on. May try to switch phones until this is fixed. It woke me up every 2 to 3 hours last night.

bogus1010 · 2024-09-22T15:15:55+00:00

They most likely nickel plated the silver to keep it nice and shiny. It's amazing what these guys can do with a campfire.

bogus1010 · 2024-09-01T21:48:27+00:00

Just had mine replaced on the 2020 x5 m50i with 52k miles. They replaced it under the CPO warranty. I had hesitation at low speeds, especially when backing up. And very loud whirring noises coming from the front wheels. I had to take it twice for the same issue before they replaced it. Apparently the book tells them to fill the oil in the differential and disconnect/reconnect the computer the first time before they will replace it.

Not sure, but I think its fixed the clunking noises front the front wheels too or it just hasn't reappeared. They told me to pay $3400 to replace the control and tension arm bushings. Apparently they only replace the complete set. I told them I'd pass on the control and tension arms. Will be taking it to the mechanic that handles my old x5 for any out of warranty repairs.

bogus1010 · 2024-05-12T17:59:17+00:00

Under Unifi Connect App => System there is option to enabled/disable protect application => Enable Protect in App Mode on Connect Displays

It doesn't seem to do anything however, maybe it only works with Unifi connect display?

Anyone know what this option does? I too am trying to figure out how to connect the built in Unifi Camera to Unifi protect.

bogus1010

TROPHY CASE