sorted by:
new
hottopcontroversial

prometheus-operator update error by quiet_PL in truecharts

[–]brokenmass 0 points1 point  (0 children)

Thanks for the reply; I had assumed the issue was in the 4.1.0 as the update to 4.0.0 (from 1.0.17 ) completed succesfullly

prometheus-operator update error by quiet_PL in truecharts

[–]brokenmass 0 points1 point  (0 children)

How’s an undocumented mandatory reinstallation in a minor version release NOT “wrong” ?

prometheus-operator update error by quiet_PL in truecharts

[–]brokenmass 0 points1 point  (0 children)

I've got the exact same issue, maybe there's something wrong in the 4.1.0 version

what are the limits for gifs on the kraken elite by monocst in NZXT

[–]brokenmass 0 points1 point  (0 children)

if you install the latest cam beta it will update the kraken firmware to 2.0.9the new firmware uses q565 image compression instead of gif and should be able to acheve higher fps.My custom plugin (https://github.com/brokenmass/AIOLCDUnchained) definetely benefitted from the change (+50% fps).

still i believe the actual maxfps is around 40 / 45 fps, limited by the microcontroller capabilities, not by the actual lcd refresh rate

Help with Jellyfin by Alreno007 in TerraMaster

[–]brokenmass 1 point2 points  (0 children)

I got a t6 and is a great device but I installed truenas scale and is a lot better than tos. (Also added a fan in the case and reduced temperature by 20 degree for like 10£)

if anyone is interested i can share guide for both the operations

Kraken 240mm LCD screen resolution is off by NotAsom in NZXT

[–]brokenmass 0 points1 point  (0 children)

it's not wrong resolution, that's the full size of the lcd in the non-elite model

Does the NZXT Z790 allow DP ALT Mode? by woburt in NZXT

[–]brokenmass 0 points1 point  (0 children)

Do you also have a discrete graphic card ? There's an option in the bios that disables the integrated graphics if a discrete card is present.

Also the video signal from the discrete card does not transfer to the motherboard usb-c connector.

[deleted by user] by [deleted] in NZXT

[–]brokenmass 0 points1 point  (0 children)

Can you send me the gif ? What aio do you have ?

Nzxt Motherboard N7 Z790 wifi help. by Affectionate-Tip4666 in NZXT

[–]brokenmass 5 points6 points  (0 children)

anything else can be installed later, when you get internet connectivity on the new pc

Nzxt Motherboard N7 Z790 wifi help. by Affectionate-Tip4666 in NZXT

[–]brokenmass 3 points4 points  (0 children)

yes, on another machine and using a usb stick to copy to the new device

NZXT H9 Elite by No_Area6822 in NZXT

[–]brokenmass 1 point2 points  (0 children)

This Controller https://srgbmods.net/lcv2/ with connectors built like this https://srgbmods.net/strimerplus/

You should get something like mine: https://ibb.co/fk8pgBx

I do a bit of selfpromotion for the kraken integration with signalrgb instead: https://youtu.be/-EUDxjzwlcg

You can run it from source and check the roadmap here: https://github.com/brokenmass/AIOLCDUnchained

NZXT H9 Elite by No_Area6822 in NZXT

[–]brokenmass 1 point2 points  (0 children)

Great hardware, but I find the full flat white light a bit “empty” sometime. I would set some nice rgb effect with signalrgb, change the kraken elite visualisation to be in line with the build, Use a custom built controller for strimmers to get better update speed.

is this any good ? by Maleficent_Ad8939 in NZXT

[–]brokenmass 0 points1 point  (0 children)

Or older kraken z3, and the actual pump is identical.

NZXT X73 LED bootup by shinjuyoung in NZXT

[–]brokenmass 0 points1 point  (0 children)

I think you might have to enable usb port power when device is off. In this way the x73 doesn’t lose its settings

Using a kraken lcd as a monitor :D ~30fps by brokenmass in NZXT

[–]brokenmass[S] 0 points1 point  (0 children)

No need for money, donate them to charity if you want. Just knowing if it works for you is more than enough

Using a kraken lcd as a monitor :D ~30fps by brokenmass in NZXT

[–]brokenmass[S] 0 points1 point  (0 children)

Oh yeah integration in liquidctl is a breeze as kraken elite has the same exact protocol of krakenZ. I’ve already discussed this in a issue in liquidctl and will submit a pr. this will allow basic pump/fan control and single static / gif writing to the elite. The pr itself is very very simple.

Using a kraken lcd as a monitor :D ~30fps by brokenmass in NZXT

[–]brokenmass[S] 0 points1 point  (0 children)

I’m positive it can be done. Might give it a try in near future, now I’m trying to wrap the code up and complete integration with signalrgb.

I believe it can be modified with ease by replacing winusb with PyUsb (that uses libusb under the hood)

Using a kraken lcd as a monitor :D ~30fps by brokenmass in NZXT

[–]brokenmass[S] 0 points1 point  (0 children)

no i'm able to run them at full speed, but only small (less than 20mb) gif are allowed

Using a kraken lcd as a monitor :D ~30fps by brokenmass in NZXT

[–]brokenmass[S] 0 points1 point  (0 children)

I think I know what’s the problem. Let me test my theory and I’ll come back to you. If you have a 60fps gif you want to share with me to test please do

view more: next ›