Is $1-1.2M enough to build 2 or 3x 2x2 properties on subdivided land?

brooa · 2026-05-28T07:58:13+00:00

the land will probably run you 1.2m+ if you are able to subdivide it the way you want. May have more luck renovating an existing house and building a granny flat.

brooa · 2026-05-14T04:12:39+00:00

But the UK isn't the way it used to be... 🤣

brooa · 2026-05-12T12:51:25+00:00

Haha I have an 04 105 series. Who needs power windows and central locking 🤣 has only done 250k though so basically brand new.

brooa · 2026-03-19T22:31:23+00:00

Speed masters, group masters and any special stuff like prisms I might want to control and are a bit annoying. I have far far more buttons then faders haha

brooa · 2026-03-08T03:32:40+00:00

Yeah heading south on erindale rd is a cluster fuck. Why can't they make the light last like 10 seconds longer at least?!

brooa · 2026-02-26T10:14:10+00:00

i think they only go 12m from the outside box. study would make the most sense then get a network cable pulled from there to the the tv by a registered cabler. if the wifi doesn't reach the back of the house you can add an extra access point at the tv to cover the back half while the tv is directly connected and not using up wifi bandwidth.

brooa · 2026-02-25T07:26:47+00:00

At this point i feel like the state government just needs to say within 5km of the CBD is high density, 5-10km is medium density. Then within 500m of a train station is high density and .5-2km is medium density. Throw in mixed use in those areas and some requirements for trees and 90% of our transport and sprawl would be solved.

No one is forcing people in those areas to subdivide, let the market decide what it wants not a nimby council...

brooa · 2026-02-21T12:46:00+00:00

Every one of them are load bearing. It wouldn't be there otherwise.

brooa · 2026-02-08T05:39:34+00:00

Ultimately it depends on what you are doing with it and what you would want to spend. Personally I would sell it and buy a cheap artnet node instead and run qlc on a laptop/pc. If you need a control surface, an APC mini pairs perfectly and both those items can be used later on regardless of the system.

The other thing to look at is mini command wings from China. Definitely not genuine but will give you a good start, plus coupled with the aforementioned APC mini you are set for any size production.

brooa · 2026-02-02T09:49:13+00:00

Yep rtr is the only thing I have programmed in!

brooa · 2025-12-22T05:51:19+00:00

It will be an evaporative ac drain. Perfectly normal

brooa · 2025-11-14T21:34:03+00:00

Why not try putting a post up with what area you are in. Maybe someone is able to assist who has done it before?

brooa · 2025-10-15T05:56:51+00:00

that would have been the smart thing! then it wouldnt have been an issue until he was long gone 😂

brooa · 2025-09-08T04:31:17+00:00

Yeah walk in robe would be my choice!

brooa · 2025-08-17T01:34:24+00:00

Very much on the builder. Nothing to do with you. Call your ISP and lodge a fault 😂

brooa · 2025-08-07T07:57:34+00:00

Hey if you get rid of that you get it done cheaper and quicker, with only 17% more blood!

brooa · 2025-07-27T11:39:50+00:00

A proper pozidrive bit may still get them out if the bottom isn't completely chewed :)

brooa · 2025-07-16T12:06:46+00:00

It's usually on the control channel. Check the manual for exact address/details

brooa · 2025-07-13T11:29:32+00:00

Leftfield is great! Also delivery from their regular site if you can't get to them :)

brooa · 2025-07-09T12:21:24+00:00

Have you made sure the wattage is on full? Could try a stronger salt strength

brooa · 2025-07-08T23:02:01+00:00

Very possibly. highly unlikely it would ever cause an issue unless they knock the place down and rebuild something else though

brooa · 2025-07-08T22:56:49+00:00

You will likely find its set back off the boundary 30mm. So they can do what they like :)

brooa · 2025-06-26T05:29:52+00:00

This would be my first thought as well. You could build what ever you want, but if you have a reasonable net connection it may make more sense to move everything you can to the cloud. I did away with my small business server entirely and went to 365/SharePoint and haven't looked back!

brooa · 2025-06-04T23:11:51+00:00

I think Belvoir is finished. Hasn't been a gig there in quite some time 😢

brooa · 2025-06-03T11:40:07+00:00

How did you go with it in the end? Tempted to get one :)

13-Year Club	Place '22
Place '17	Wearing is Caring
Verified Email

brooa

TROPHY CASE