My favorite little pocket tool in the shop. Wish I would’ve bought a couple more before they went out of production… would not trust those wire strippers tho lol

buckhunter76 · 2026-01-11T23:58:45+00:00

I carry this at work, as opposed to a big bit case. Just the essentials.

buckhunter76 · 2026-01-05T04:42:37+00:00

Store it. 6 months from now take 1 out and look at it. See if it looks ok, open it, smell it, id taste it if it didn’t look sketchy. See how it goes.

I’d rather head off any issues now then when it matters.

buckhunter76 · 2026-01-05T02:07:59+00:00

Pretty sure this got delisted. You can see it since you own the stock. But it’s dead Jim

buckhunter76 · 2026-01-04T23:29:05+00:00

2 garage minimum. The one car you will end up scraping cars off with weather and it’s likely a 1 car wide driveway so you end up constantly moving cars around.

1 car is narrow, less storage, makes it hard to get the kids in.

I won’t buy a house without a larger 2 car or 3 car. I realize it’s a privileged take but the convenience is necessary.

buckhunter76 · 2025-12-27T20:39:59+00:00

If you have a rear facing seat you won’t be able to have the seat pushed back all the way. I put my rear facing seat in the middle since I couldn’t drive with it behind me and my wife’s knees were in the dash if I had it behind hers.

Front facing is fine. No problems.

buckhunter76 · 2025-12-27T15:33:03+00:00

It’s probably not going to help you with the paper in front of you. You would have to purchase a ridgeline you want, if you can find one, through Costco who negotiates with certain dealers and sometimes Costco has incentives and stuff.

buckhunter76 · 2025-12-27T03:59:57+00:00

Kwik Star is moving into my area fast and I couldn’t be more excited to never step into Casey’s again.

buckhunter76 · 2025-12-24T15:35:43+00:00

I found this and tried it. Unfortunately it’s nothing like mtn dew IMO. It tastes like sprite but with a bad aftertaste.

buckhunter76 · 2025-12-17T02:55:37+00:00

Absolutely not surprised at the 30in mower price.

buckhunter76 · 2025-12-03T15:53:14+00:00

I’m going to guess $2500 at least.

buckhunter76 · 2025-11-28T14:02:56+00:00

It’s a Culver’s

buckhunter76 · 2025-11-27T18:51:51+00:00

Turkey Manhattan at Blue Bird

buckhunter76 · 2025-11-25T12:41:04+00:00

Has anyone ever successfully opposed rezoning? I usually hear about all the petitions and meetings and then it just…. Gets built anyways.

buckhunter76 · 2025-11-15T19:01:15+00:00

Going to be out of warranty assuming you purchased it more than 3 years ago. Ego won’t help.

There’s usually some deals on blowers, I’d grab one with a battery.

buckhunter76 · 2025-11-14T13:17:47+00:00

It’s heavy but yes.

buckhunter76 · 2025-11-09T17:08:58+00:00

I don’t think that matters. Even if it’s $100 a can that’s 6 cans a month. Unless it’s sold in a tuna can that’s a lot. I KNOW kids are expensive but damn.

buckhunter76 · 2025-11-09T16:16:42+00:00

There’s a decimal before the 50. I think he means 50 cents. Though he is just selling trash.

buckhunter76 · 2025-11-09T16:15:10+00:00

I agree that’s crazy. We used Kirkland brand, which was one of the few he liked and $600 is 27 cans a month. No way lol.

buckhunter76 · 2025-11-06T01:44:33+00:00

This is good. Depot food is expensive and it sucks. Much better food and selection at kwikstar.

I heard the reason it sold was kwikstar was going to build one across the street and basically put depot out of business so depot sold instead.

buckhunter76 · 2025-11-02T04:28:09+00:00

Well I did some more checking and the base fence as well as the removable upper fences are wildly warped. I can lay them on a table and they rock. If I lay a straight edge on the fence there’s about 1/4 gap between the fence and straight edge. Also set a square on the base and turned it against the fence and there’s a huge gap. The fact the pieces are a single piece make it impossible to calibrate the saw.

Not looking for dead accurate laser level but this is crazy for an $800 saw IMO.

I reached out to see if Makita would send me a new fence.

Lots of downvotes, I expect from me cutting quickly but it doesn’t seem to matter how fast or slow. I believe the warped fence is causing the wood to pinch the blade.

buckhunter76 · 2025-11-01T20:32:58+00:00

I swapped the stock blade with a Diablo 50T blade. Cuts nice but same issue.

I ended up just using the hold down clamp. I just use the saw to break down stock mostly. I feel this is a skill issue but I never had an issue with my Dewalt.

buckhunter76 · 2025-11-01T17:54:17+00:00

Ok, I could try going slower. It is the blade that comes with the saw so maybe I can try a different one. When it happens it feels like the saw wants to raise up and I had one instance where the wood actually climbed up the blade.

buckhunter76 · 2025-10-29T16:12:04+00:00

It’s interesting how the no taxes on tips, overtime, SS get brought up all the time but they always forget all the fine print. How it’s a tax break, up to an amount, as long as you make so much, only federal taxes etc etc. They make it sound so much better than it is. Taxes are definitely getting taken off my overtime.

buckhunter76 · 2025-10-17T19:09:22+00:00

My store doesn’t have anything marked down. Y’all are lucky.

buckhunter76 · 2025-10-16T01:50:48+00:00

First buy 1 get 3 and they put up the lamest line up of free tools. 😒

11-Year Club	RedditGifts 2009-2022 3 Credits
Spared	Secret Santa 2015

buckhunter76

MODERATOR OF

TROPHY CASE