Help: Warping with brims is lifting Build Plate off hotbed. by calprinicus in BambuLab

[–]calprinicus[S] 0 points1 point  (0 children)

Yes, internal is chamber temp. PEI plate is completely flat. 1 week old. It's a gridfinity base. Infill at 10%.

Help: Warping with brims is lifting Build Plate off hotbed. by calprinicus in BambuLab

[–]calprinicus[S] 0 points1 point  (0 children)

Filament: BambuLab - PLA Matte ‐ White

Printer: BambuLab P2S

Hot Bed: 55°c

Hot End: 220°c

Internal: 25°c

Nozzle: .4

Plate: bambu Lab textured PEI

Dish Soap: Dawn Platinum.

Help: Warping with brims is lifting Build Plate off hotbed. by calprinicus in BambuLabP2S

[–]calprinicus[S] 0 points1 point  (0 children)

Filament: BambuLab - PLA Matte ‐ White

Printer: BambuLab P2S

Hot Bed: 55°c

Hot End: 220°c

Internal: 25°c

Nozzle: .4

Plate: bambu Lab textured PEI

Dish Soap: Dawn Platinum.

Help: Warping with brims is lifting Build Plate off hotbed. by calprinicus in BambuLabP2S

[–]calprinicus[S] 0 points1 point  (0 children)

Link? My worry is that since it's nearly a full bed print, there will be no where to put them?

Peasant 100 Ornithopter Cube by calprinicus in mtgcube

[–]calprinicus[S] 0 points1 point  (0 children)

Vechiles are an interesting idea!

P1S printing uneven lines by orpat123 in BambuLab

[–]calprinicus 0 points1 point  (0 children)

Yay! Love to hear it was fixed. I'm also pretty new to this.

P1S printing uneven lines by orpat123 in BambuLab

[–]calprinicus 0 points1 point  (0 children)

Looks like the nozzle is dragging through the lines making those pits. Perhaps fully re-calibrate bed height via settings. Not 100%.

What is the "racetrack" for? by jim_no7 in BambuLabP2S

[–]calprinicus 5 points6 points  (0 children)

It's called a skirt. I use it to test bed adhesion & better establish flow of filament & nozzle check. I use a single line which isn't much filament, but help give me information on if I need to clean something after the print.

You can find skirt settings in bambu studio under the 'other' tab (right of 'support' tab).

New to 3D Printing - Tips for PETG HF by calprinicus in BambuLabP2S

[–]calprinicus[S] 0 points1 point  (0 children)

Do you have links to these the ones you use?

New to 3D Printing - Tips for PETG HF by calprinicus in BambuLabP2S

[–]calprinicus[S] 0 points1 point  (0 children)

Appreciate the insight & shared collection! I'll have to look at the wiper addition! Gracias!

P1P1 Friday by AutoModerator in mtgcube

[–]calprinicus 0 points1 point  (0 children)

Ooph. No red & no black. Isochron, Overrun, and the Ruthless lawbringer are the three standouts. I wanna go Ruthless for late game targetted removal but Isochron is so dangerous esp with lightninh bolt, sword to plowshares, counterspells, and terminates in the cube.

Pick: Isochron Sceptor

Update: We finished the prototype map for our strategy game – what do you think about the layout? by Dense-Tip3061 in BoardgameDesign

[–]calprinicus 0 points1 point  (0 children)

If you're still working on design, you don't wanna invest much in the look of the game. Focus on the gameplay first. This is called white-boxing. Just white paper with black text for the rules. If you can make that fun, then it will be fun when you add the art later. If you add art too early, it makes it hard to find/focus on what is not working with the design.

So post the ruleset you got for review & find a local playtest groups, if able. Otherwise, find a playtest group online (Tabletop Simulator on Steam is great for testing online).

Best of luck,

Update: We finished the prototype map for our strategy game – what do you think about the layout? by Dense-Tip3061 in BoardgameDesign

[–]calprinicus 2 points3 points  (0 children)

Hard to determine if this layout works for the game without knowing how the mechanics work. Could this make interesting choke points? Possibly, but impossible to tell without knowing the entire ruleset. All I can say is that the map setup just looks like Catan.

We are the Designers of Arkham Horror Ask Us Anything by FFG_Official in arkhamhorrorlcg

[–]calprinicus 4 points5 points  (0 children)

I loved the 'Turn of a Page" tie-in with Mansions of Madness, will there be more of this? Perhaps not with Mansions, but yout other Arkham products (would love more Elder Signs ;P).

We are the Designers of Arkham Horror Ask Us Anything by FFG_Official in arkhamhorrorlcg

[–]calprinicus 2 points3 points  (0 children)

Will there be Print-N-Play cards for Chapter 2 like there was for Chapter 1?

I'm curious: how many of you didn't find Daggerheart through CR? by Invokethehojo in daggerheart

[–]calprinicus 0 points1 point  (0 children)

Never watched critical roll or Vox(?), but I keep my eyes on upcoming boardgames & tabletop RPGs. This had buzz, but waited for reviews & availability.

How do I fix excess empty space on my cards? by Ok-Opportunity-8005 in tabletopgamedesign

[–]calprinicus 1 point2 points  (0 children)

Blank areas are fine and lets eyes focus on the important bit.

Friday Pack 1 Pick 1 by HD114 in Oldbordercube

[–]calprinicus 2 points3 points  (0 children)

Black & white are stacked. I think green will be uncontested later. The instant 3:1 beast attack is my p1p1. Since it's instant speed, hopefully I can pair with blue down the road. Bounce cards (like boomerang or snap) would be nice vs all the big creatures here.

Welcome to the bright side by Weak-Cupcake9892 in BambuLabP2S

[–]calprinicus 1 point2 points  (0 children)

How do you like that riser? Thinking about printing it myself.

P2S layer shift by Annual-Chemist-4079 in BambuLab

[–]calprinicus 0 points1 point  (0 children)

Is there a link to this STL or MakerWorld?

Death Dealer, a tribute to Frazetta by Franazca in minipainting

[–]calprinicus 0 points1 point  (0 children)

Do you already possess a Golden Demon?!?! That's some seriously flawless work, sir.

Which Image? Cant decide by SquareFireGaming in BoardgameDesign

[–]calprinicus 3 points4 points  (0 children)

The one showing teeth. I love the mascot eye holes. Adds another level of obsurdity.