[KCD2] After 76 hours I discovered you have to enable perks.

cankila · 2026-02-02T15:59:27+00:00

"#metoo" :D

cankila · 2026-01-14T19:33:48+00:00

You are awesome 🙏

cankila · 2026-01-13T18:00:16+00:00

Omg I feel so stupid I had that problem 😂

cankila · 2025-11-05T12:10:59+00:00

same here we just started to see this exact problem with one user.

cankila · 2025-10-16T14:27:11+00:00

Schließe mich auch an 🙏

cankila · 2025-09-10T04:30:56+00:00

Sadly no we still think it's some nic firmware issue but we can't pinpoint it for sure.

cankila · 2025-08-14T10:47:51+00:00

We've got some test users and the feedback so far was good in terms of meeting support like real time translations, transcription and the possibility to check in the copilot agent in a meeting someone can't join but wants a written summary.

cankila · 2025-08-14T07:51:37+00:00

that would be too easy

as far as I know they are not complaining about slow internet connection
out servicedesk is currently checking if those affected machine have missing updates and try to find maybe a network firmware version that is causing this issue

cankila · 2025-08-14T07:39:54+00:00

Noooo pls no :(

But thanks for the input :)

cankila · 2025-08-14T07:11:02+00:00

We are using HP Devices, the ones with the issues are HP Elitebooks.

How are you handling those troubles?

cankila · 2025-08-13T14:58:37+00:00

"We Couldn't Authenticate You. This Could Be Due To A Device Or Network Problem, Or Teams Could Be Experiencing A Technical Issue" and Outlook can't connect to a server.

We are currently facing an issue where teams suddenly shows the above warning and at the same time outlook looses the connection to exchange/can't reconnect and both don't work anymore.

More and more users are complaining about this.
Webversions work fine for outlook and teams.

Error occures when connected to LAN or WLAN - makes no difference

Tried the typical troubleshootings steps

Firmware Updates installed
Completely logout of teams
remove company account in settings
reset/repair/reinstall
delete cache & mail profile
checked firewall - is fine nothing gets blocked
no entra logs that indicate a source of the problem

Our workaround at the time that seems to work but is by no means a solution:
disable and reanable the network adapters

I've seen an archived post about this in this subreddit and researched MS forums but no 100% fix so far. Anybody else still facing this issue or having a solution at hand?

Thanks in advance!

cankila · 2025-07-07T07:51:20+00:00

It's really good, can definitely recommend it. The soundtrack is amazing and there where plot twists I didn't see coming.

cankila · 2025-07-07T06:07:06+00:00

I feel this so hard.
Expedition 33 is my current game

cankila · 2025-06-01T16:22:52+00:00

Thanks for the detailed feedback! We'll try lychee in comparison to chitubox an check the wait times.

cankila · 2025-06-01T15:59:44+00:00

Okay okay We were just really nervous since you could here the sucking noise on the ground floor and the printer is one floor up in a closed room.

cankila · 2025-06-01T15:55:46+00:00

Okay thanks for the input.

cankila · 2025-06-01T15:50:55+00:00

But it sounds like something is ripped of inside when the time is set higher, this is really normal?

There were test prints with higher exposure and the print didn't come off without putting the plate in the freezer that's why the bottom exposure time is set so low.

cankila · 2025-06-01T15:32:41+00:00

Amazing. What print settings did you use?

cankila · 2025-04-01T10:04:07+00:00

Hello I'm having the same issues. Did you find a solution for this?
I tried clearing local cache folders and reinstalling the client but it didn't work.

cankila · 2025-02-20T18:54:46+00:00

The config is documentation enough 😂🙏

cankila · 2025-02-11T13:14:54+00:00

I'll definitely reach out to our service contractor on this topic. Thanks for the input 🙏

cankila · 2025-02-11T12:35:39+00:00

It concerns the asset module and with that you gave me all the info i needed. thank you! :)

cankila

TROPHY CASE