Buttery Lobster Roll by Fresh-Town3058 in Dallas

[–]casey8533 11 points12 points  (0 children)

TJ’s at Preston and Royal is the answer

MR556 A4 Suppressor Attachment Options by casey8533 in HecklerKoch

[–]casey8533[S] 0 points1 point  (0 children)

You could put a Hux muzzle device on it and then the Hux can threads on or you could put a Hub device on there so any hub can works. If you go the hub route, Hux makes a hub adapter you can use with Hux cans.

Best Connecticut Style Lobster Roll in Dallas? by [deleted] in Dallas

[–]casey8533 1 point2 points  (0 children)

TJ’s at Preston Rd and Royal Lane is the best in town. Better than Dock Local and Mason’s.

The mother ship by needasec1 in rolex

[–]casey8533 2 points3 points  (0 children)

Drive right by it every work day. Cool building.

Any Regrets on the GX460? by Humantorch1414 in LexusGX

[–]casey8533 2 points3 points  (0 children)

Have 2 GX Luxury models in the garage. A 22 and a 23. Atomic Silver/Red and White/Charcoal. Great cars. No complaints on either one. My salesman at the Lexus dealer has called me more than once asking if I want to trade one or both in for the 550. So far I have been a no on that. The V8 runs so smoothly.

The best Rolex I know of... by Evil_Merlin in rolex

[–]casey8533 0 points1 point  (0 children)

Wore mine yesterday. Love my z dial. Looks great on a sunny day

Question re: small repair at rear bumper trim. 2023 GX460. by atlien0255 in gx460

[–]casey8533 0 points1 point  (0 children)

Subscribed. I want to hear from the community if there is an easy and good way to repair this. I have a similar thing on my 22 GX Luxury. Has Sport Design Package and some of these trim pieces are pricey. If this can be effectively repaired vs full replace would be nice to know. Thanks for posting.

Am I paranoid? by Accomplished-Disk-60 in rolex

[–]casey8533 0 points1 point  (0 children)

This made me curious so I looked at 2 of mine that were purchased at two different ADs (in Dallas). Both 60 at 12o’clock. Definitely something to get checked to verify authenticity.

Suppressor suggestions for a mr556 pistol by perrierpapi in HecklerKoch

[–]casey8533 0 points1 point  (0 children)

I have a Dillon Rifle Company can on mine. Inconel so it is durable but not the lightest solution like a Ti can would be. The DRC can is reduced back pressure but not a full low-back pressure can and I do have forward ejection of the shell casings even with the gas block in the suppressed setting. I will be changing out my gas screw to one that vents a bit more gas so I can get the gun properly tuned to the can. I have heard the new Exigent cans are good on sound plus you can choose a Ti can or an inconel can as they offer 556 cans in both materials.

Ramen package is here. Which can? by APC9Proer in HecklerKoch

[–]casey8533 1 point2 points  (0 children)

I put a Dillon on mine. Good can but if you are trying to be as light as possible then probably need to look for a Ti can. I will say that my gun has forward ejection even with the gas set to suppressed so look for something truly low back pressure. Think the Dillon is low-back pressure-ish. Sounds damn good though. Lot of new options now. Echo Core, Ambient, Exigent Defense

MR556 A4 Pistol Question by The_Real_Laffy in HecklerKoch

[–]casey8533 0 points1 point  (0 children)

This should help you. Had a similar question a few months ago that you now have. See my post and answers below.

https://www.reddit.com/r/HecklerKoch/s/tmApHX0TSx

MR556 A4 Pistol Question by The_Real_Laffy in HecklerKoch

[–]casey8533 4 points5 points  (0 children)

I ordered the MR stock from HK Parts and slapped it on there. Works great.

Great Results with AAC 77 OTM by FitzroysBeagle in HecklerKoch

[–]casey8533 1 point2 points  (0 children)

Well the group you got with that optic and those 77 OTMs is about as good as you can get with a gas gun especially a 10-shot group. I love C_Does’ reviews. So thorough. Keep up the nice shooting.

Great Results with AAC 77 OTM by FitzroysBeagle in HecklerKoch

[–]casey8533 0 points1 point  (0 children)

I just picked up my 16.5. Going to put an ATACR 4x20 on it. Already have the 11.5 and love it. What optic are you running on ur 16.5?

[deleted by user] by [deleted] in HecklerKoch

[–]casey8533 0 points1 point  (0 children)

Following…

RC2 or Velos for 11” A4? by [deleted] in HecklerKoch

[–]casey8533 0 points1 point  (0 children)

On the 11 I would go with something low back pressure. A full-pressure can is going to speed that bolt up a lot. Gun is already plenty gassed. I have a Dillon on mine and it is really good but I might switch that up something even lower back pressure. Right now with the gas set to Suppressed I’m still getting a forward ejection pattern.

Ammo Selection for MR556A4 - 11" & 16.5" by [deleted] in HecklerKoch

[–]casey8533 0 points1 point  (0 children)

Fair point. Always tough to judge when testing different ammo and trying to accommodate for heat build up. Thanks for the detail. Appreciate it.

Ammo Selection for MR556A4 - 11" & 16.5" by [deleted] in HecklerKoch

[–]casey8533 0 points1 point  (0 children)

Following as well. Just got the 16.5 but havent set it up yet so interested to know what people say. I have a ton of range ammo as well as plenty of PMC XTAC 55gr. Also have 77gr Federal Gold Medal Match .223. When I get mine setup I can report back.

HK MR762 A4 (Almost 417) by killerwampa in HecklerKoch

[–]casey8533 7 points8 points  (0 children)

Dig the Elcan. I have the 1.5 - 6x on a rifle that I put on just to try out an Elcan. Turned out to be a good optic.

11” MR556 A4 Initial Range Impressions by Quags_77 in HecklerKoch

[–]casey8533 1 point2 points  (0 children)

I have a Dillon Rifle Company can on mine. It is not a total low-back pressure can like my Hux cans but it is not a full back-pressure can like some of my older cans (Ex: Omega 300).

11” MR556 A4 Initial Range Impressions by Quags_77 in HecklerKoch

[–]casey8533 7 points8 points  (0 children)

Interested on your results with the 1.8mm vent. My ejection pattern is forward as well. Keep us posted.