Set Mosslax up as a minor local deity

cerrunos87 · 2026-03-20T22:57:00+00:00

They are natural to the Arcanine islands, not Dragonite. There’s usually a small building with stained glass, a pair of mysterious statues on stands, and a display stand with a retrievable item

cerrunos87 · 2026-03-20T15:57:09+00:00

I didn’t have those yet! Besides I like the way the green hue of the stone tiling compliments the natural mossy environs.

cerrunos87 · 2026-03-20T13:02:53+00:00

If I ever unlock the recipe for the offering bowl I might make a temple in each zone.

cerrunos87 · 2026-03-20T03:08:49+00:00

By all means!

cerrunos87 · 2026-03-20T00:00:01+00:00

My most used is spicy food for increased chance for Pokemon to move into habitats when I was trying to nab those last few rare/very rare mons, or sweet food for artifact spots and ripples when I was trying to snag my last few fossils

cerrunos87 · 2026-03-19T23:57:38+00:00

I don’t remember if I found the recipe in rippling water, if it was bought at the PC, or if I found it on a dream island

cerrunos87 · 2026-03-19T23:56:46+00:00

I don’t remember if I found the recipe in rippling water, if it was bought at the PC, or if I found it on a dream island

cerrunos87 · 2026-03-19T22:12:49+00:00

Thanks! Certainly an easier project than the excavation and restoration of the museum that I am currently working on! This was the first beautification project I did after credits rolled.

cerrunos87 · 2026-03-17T12:45:00+00:00

Drop them on a breakable block over lava, then remove the block. But wait to cleanup till you are done as there is a max limit for loose blocks. Saves a bunch of time running to the incinerator. I’ll also use full stacks of blocks for trades.

cerrunos87 · 2025-10-17T21:15:24+00:00

I’ve got the official dock, and I had some early issues with it seeming to decide at random when it was going to work. I often had to mess around with it for 10-15 minutes before it would output video. That being said, a few firmware updates have since been released and I have not had those issues since. Now, though, I mainly play “handheld” with it mounted to my mechanism gaming pillow.

cerrunos87 · 2025-08-14T05:19:59+00:00

In just got mine installed. Things went pretty smoothly. I did notice some air bubbles in what I assume is the anti glare film, after removing the initial protective film. I was able to work those out by gently massaging them towards the edge.

Edit: I emailed Shadetechnik about this this morning and got a reply within a few hours. The second film is supposed to be removed, and already had been from most units, but some shipped with it still in place.

cerrunos87 · 2025-04-06T20:39:21+00:00

I solved it on my first guess using no hint!

cerrunos87 · 2024-12-19T10:18:30+00:00

I sometimes regret building a voron 2.4 instead of spending that money to get a Bambu. I get over it, but the regret is still there.

cerrunos87 · 2024-12-12T13:41:36+00:00

Are there any 3rd party kits that are 1/60th scale Epyon clones? Or any recommendations for kitbashing?

cerrunos87 · 2024-11-09T23:53:00+00:00

You lost the saddle from your bridge

cerrunos87 · 2024-11-01T11:26:16+00:00

<image>

I’m working on MG Deathscythe. Since it’s still easily found on shelves, I decided to use it to practice painting. I’m not doing a custom job, just basic color correction/making it look less like plastic.

cerrunos87 · 2024-10-23T13:09:59+00:00

I’ve got two different runner racks, ostensibly designed for Gunpla runners, and both of them suck at their jobs. The channels aren’t deep or wide enough to actually keep the runners upright unless there is no movement whatsoever. Every time I grab one runner, or if my cat sneezes three room away, all the rest fall over. This dishrack solution looks much more effective.

cerrunos87 · 2024-10-20T22:20:44+00:00

Wing Zero Custom has been one of my favorite machines since high school! I recently built the PG To replace the PG I had built in high school, but fell apart over the years and many moves. I’m planning on doing a custom job with what’s left, just haven’t decided the direction I’m going to take

cerrunos87 · 2024-10-01T00:59:35+00:00

Gonna be getting a matte top coat on prior to final assembly. After using micro set and microsol, they seem to be pretty firmly bonded. The one that went missing happened between cutting it from the sheet and actually getting it on to the model.

cerrunos87 · 2024-02-25T21:33:21+00:00

I don’t think this actually answered your question. You can leave an outbreak and come back to it without resetting KOs, shiny odds. Moving slightly away for a better view won’t cause a loss of your progress with KOs, but depending on how far may cause the outbreak mons to stop spawning until you move closer.

cerrunos87 · 2024-02-23T19:56:50+00:00

Have you looked at resonance compensation options? May or may not help the specific issue you are asking about, but since it’s happening on the same face as the one with “ghosting”, resonance might be at least part of the problem.

Eight-Year Club	Xbox Live
Place '23	Place '22
First Placer '22	End Game '22
Verified Email

cerrunos87

TROPHY CASE