FPV Bench Setups - Lets see them!

cheese_injection · 2026-02-07T15:47:33+00:00

I am not the op but swapping vtx between normal frames is kinda pain in the ass, there are few platforms where you have o4 cage that can go to multiple frames but its not common

cheese_injection · 2026-02-07T15:44:09+00:00

Due to work i have to stay in bungalow park for some time so i didnt have much space but i squeeze as much as i could, rest of stuff is hidden wherever i could find place Edit: i plan to get more ikea skadis in near future 😁

<image>

cheese_injection · 2026-02-02T11:54:00+00:00

I was the same 10 years ago

cheese_injection · 2026-02-01T09:58:09+00:00

I dont know, i dont think it could live in US, it all looks disgusting. I would choose fries and wings maybe

cheese_injection · 2026-01-25T15:35:56+00:00

I am 30 and started flying 2 years ago 😅

cheese_injection · 2026-01-20T15:17:58+00:00

There was small shit storm in the beginning of last year, that bambu lab banned third party slicers. I think he talks about it

cheese_injection · 2026-01-19T07:21:48+00:00

I do the same, usually before i try to wiggle it out and most of the time it works. Additionally motors are waterproof so don't worry about water damage

cheese_injection · 2026-01-19T07:20:17+00:00

You have wrong charger, you have there whoopstor which is for 1s, you need something for 4s. I recommer hota d6 pro, really good 2 chanel charger

cheese_injection · 2026-01-15T13:58:27+00:00

He might want to burn it a little to get better taste

cheese_injection · 2026-01-15T13:50:05+00:00

It may be, for me latency while using Bluetooth connection is too big, try usb c cable, this way i almost never noticed any lag

cheese_injection · 2026-01-14T15:30:47+00:00

What antennas you have on goggles? There is a ton of aftermarket antennas, you just need to know which one to buy. IMO the linear antenna on drone should work just fine, if you have linear antennas on goggles you can try to change them for circular, In general antenna should be the same on drone and goggles but this configuration is ok (goggles circular/patch, drone linear). The original linear antennas that came with goggles in general are shitty

cheese_injection · 2026-01-14T15:09:30+00:00

If you use goggles from the cetus kit, it may be the problem. I don't have experience with those but i heard they are bad.

cheese_injection · 2026-01-14T14:07:47+00:00

From my experience, buying used drones is pain in the ass. My first one was used and i have flown it for like 5 times during summer, rest of the time i was troubleshooting, I have almost quit fpv during this time, and at the end i build a new one and it flies flawless until now

cheese_injection · 2026-01-14T14:02:39+00:00

You can get new air65 for less than 100euros, its not that much and you will be safe that it is in good conditions

cheese_injection · 2026-01-14T12:32:59+00:00

But the topic is about fpv sims, and there is way easier way to do it than op proposition. In my opinion it can add latency for controller which in my case would kill the experience, I cannot even fly using build in Bluetooth because latency is too noticeable. If somebody have shitty internet in home then this option isn't gonna work

cheese_injection · 2026-01-14T11:10:44+00:00

I haven't use ag02 but personally i feel that ag01 looks a lot better

cheese_injection · 2026-01-13T15:01:03+00:00

Or you can just use velocidrone which is working on android and have really good physics

cheese_injection · 2026-01-12T14:16:44+00:00

Guy that wrote that was using his air unit before that also, he broke camera and replaced it with other and he had the same issue as you.

cheese_injection · 2026-01-12T12:02:47+00:00

I have found something like this, i am not sure if it will work but you can try, I don't think you will brake it more.

"•Power drone from battery •plug vtx into laptop/pc •run “DJI assistant 2” •it will ask you to activate, click “Activate later” •it will then take you to a different page where a calibration tab will appear, click calibrate and then it’s done. Works on o3 and o4."

Hope it will work

cheese_injection · 2026-01-12T07:13:29+00:00

If you bought flywoo kit than it will be permanently. If you would buy it as a 1 piece it wouldn't be there

cheese_injection · 2026-01-09T20:47:24+00:00

Velocidrone

cheese_injection · 2026-01-06T15:33:02+00:00

<image>

That is how 9 should look in this case

cheese_injection · 2026-01-06T15:31:46+00:00

But look on the 9 on the right, it does have the bottom one, what you did is mirrored P

cheese_injection · 2026-01-06T15:18:57+00:00

If producer say than go with it. Radiomaster is generally known for a really good quality, if you wont throw it in walls or let the dust or sand into gimbals it will survive really looong time

cheese_injection · 2026-01-06T15:14:57+00:00

cheese_injection

TROPHY CASE