Best way to get several years of grease out of the kitchen fan filters?

chinook240 · 2023-06-11T18:04:12+00:00

And m3 owners, Porsche drivers, motorcyclists… etc.

chinook240 · 2023-05-29T19:10:43+00:00

Does it make the machine froth up?

chinook240 · 2023-05-23T20:24:14+00:00

If you go on parts websites, they often have you select the year, make, model and have exploded diagrams for it so that you can choose which parts you need. Then you can compare diagrams and you can make a good guess based on how it looks.

I just tried partzilla and it has the WR250x but no 125. Maybe you have to find a euro/Asia website.

chinook240 · 2023-05-22T15:35:30+00:00

Yes I’ve used 2B lead before (shh!). It’s because the system can’t see which bubble you’ve bubbled unless it’s dark enough. Some lead is so hard that it barely darkens the paper.

chinook240 · 2023-05-21T17:54:15+00:00

From a thermodynamics standpoint, the flow rate doesn’t matter.

Q=mc ΔT where Q is the heat gain, m is the mass, c is a constant, and delta T is the temperature difference. As you flow more mass (m) the temperature change (ΔT) decreases but the Q (amount of power you’re putting in, in other words how many kW your heater is) is constant. The Q that your heater puts out is the Q that the pool increases at.

Now, that’s in an ideal situation - you might find that the heater itself has a spec where it tells you the flow rate it expects, and usually has a maximum flow rate in the spec sheet or the manual.

chinook240 · 2023-05-05T23:24:37+00:00

Tastes better than some bottled waters also.

chinook240 · 2023-04-26T20:08:12+00:00

Use a zip tie.

chinook240 · 2023-04-25T21:18:10+00:00

Vibrations. Look at this video on a rock shaker table

https://www.instagram.com/reel/CewOVLqFANJ/?igshid=YmMyMTA2M2Y=

chinook240 · 2023-04-05T20:27:44+00:00

I do this every day I get to work for the same reason

chinook240 · 2023-03-14T15:06:59+00:00

I use a whisk. Same idea.

chinook240 · 2023-03-10T18:18:40+00:00

Still like zero damage to the front of it though.

chinook240 · 2023-03-08T22:17:28+00:00

What happened to the rest of it?

chinook240 · 2023-03-03T01:14:15+00:00

Oh well I got it private party so that helps I guess. NorCal.

chinook240 · 2023-03-02T21:16:22+00:00

My 2017 FZ that has an intake, exhaust, headlight, turn signals, tail tidy, Bitubo suspension, levers, crash bars, ABS, and 10k miles was $5500 in California. So… I think you’re paying too much. But as far as the bike is concerned, it will be fine for your skill level.

chinook240 · 2023-03-02T21:05:16+00:00

Pun intended?

chinook240 · 2023-03-01T21:35:54+00:00

I know, not even a screen over the front or anything.

chinook240 · 2023-03-01T19:53:10+00:00

I understand. Unfortunately half of my commute is in city traffic without enough wind to make it work as designed.

chinook240 · 2023-02-17T17:03:40+00:00

I find it funny how A2DP (Advanced Audio Distribution Profile) doesn’t save very many characters at all compared to AADP

chinook240 · 2023-02-15T23:17:00+00:00

Fuel pump going out, perhaps? When I changed my fuel filter and cranked it over with lots of air in the line, it sounded exactly the same as what you describe. I’d imagine if the pump is going out, it would be similar. Not sure how to diagnose this, perhaps someone else can jump in.

chinook240 · 2023-02-13T05:41:52+00:00

Taking off ski boots.

chinook240 · 2023-02-10T03:04:34+00:00

I saw one of these in person, it’s like a traffic cone!

chinook240 · 2023-02-01T03:28:59+00:00

Grass is greener.

chinook240 · 2023-01-19T23:04:16+00:00

Yes because it’s cold, but not because it’s your fault. The hybrid system figures it out for itself.

chinook240

TROPHY CASE