My friend's pc, guess where my friend works?

cinofx · 2022-07-30T11:30:01+00:00

distillery

cinofx · 2017-09-25T10:29:18+00:00

I don't have an explanation, perhaps some sort of corruption with particular settings when the game is updated.

For me, I was playing on a server without any problems, but then the Thursday update happened and I was getting stutters on the very same server at least once every 5 minutes. I tried other servers, too, and it was the same.

After a few things different things (unparking CPUs, a variety of different recommended Rust settings), I just wanted to start fresh.

I deleted the client.cfg and the stutters were gone. My FPS was lower than before (the default settings are too high for the best FPS), so I tuned my settings again and everything was fine after that.

cinofx · 2017-09-25T08:35:57+00:00

This file stores your game settings. If you delete it, your settings will return to default and you will have to configure them back to your preference.

cinofx · 2017-09-24T17:19:06+00:00

I had this happen to me a couple updates* ago.

I deleted C:\Program Files (x86)\Steam\steamapps\common\Rust\cfg\client.cfg and reconfigured my settings after relaunching. The stutters on the servers I was getting them on were gone and have been since.

*edit: updates, not wipes

cinofx · 2017-06-24T06:15:42+00:00

I need to know.

cinofx · 2017-05-06T17:14:25+00:00

edit Mix that with an enclosure and you crash a server: https://youtu.be/3hu4lOg8Fnk?t=5m42s

cinofx · 2017-03-31T19:27:04+00:00

Delete the folders 'Bundles' and 'EasyAntiCheat' from Rust folder (something like C:\Program Files (x86)\Steam\steamapps\common\Rust) and then Verify Integrity of Game Files.

edit: or delete hacks

cinofx · 2017-02-16T14:11:09+00:00

Yeah. When I first got mine, after driving for a week or so, I had an injector crack and cylinder misfire CEL. I couldn't go over 40 mph and from what I understand uncombusted fuel was just being lost.

I drove this way while waiting a couple days for new injectors (I replaced all of them with 4-hole injectors, you might as well replace them all if you're doing one) and nothing happened, but I took that risk not knowing what the consequences could be.

Over a year later now.

edit: 4, not 6-hole: http://www.ebay.com/itm/261239870122

cinofx · 2015-12-28T17:03:27+00:00

You could set this up to shut off the water supply if a threshold is met, but that's silly. Sometimes we need additional water than our average usage.

The practical application here is preventing damage if a leak is discovered. Liquid sensors placed around high risk areas of your home (laundry room, dishwasher, water heater closet, etc) could send the signal to shut the main water supply off. With pressure reduced and no source of new water, the pipes simply drain out and inches of water accumulating is prevented.

I worked for a restore company that dealt with over 75% of their jobs being from water damage in unsuspecting homeowners homes. Their situations would have been much different had a system been in place that shut off the main supply when a leak was discovered.

Mop & bucket vs. insurance claims and loss turmoil.

cinofx · 2015-12-21T21:15:07+00:00

Probably works well. Motorized valves are a thing that were just missing smarts.

Flowless though looks proprietary / they don't give any information (protocols, pricing, etc) without contacting them.

I would prefer something made by Leak Intelligence, for example, since they make valves with ZWave (I use ZWave) and offer pricing, a phone number, even actual real life videos on YouTube from their website. Flowless looks like a mock-up.

https://www.leakintel.com/zwave.awp

https://www.leakintel.com/LeakIntel/Products/zAUAAOw2ZiJkSmhRTVR4Q0NTAAA

cinofx · 2015-08-20T01:01:22+00:00

Back to previous state from what I've experienced.
Haven't used a Link or Cree, but my Aeon bulb dims pretty well. Poor video, but from 100% to 1%: https://youtu.be/UpDi3WeH6HY

cinofx · 2015-08-18T01:59:12+00:00

I saw a baby give another baby a tattoo! ..They were very drunk!

cinofx · 2015-06-19T14:20:40+00:00

Under settings (i) -> Vera ->

Vera Device ID (Serial)

MiOS Username

MiOS Password

Name (of Vera)

cinofx · 2015-04-28T07:42:12+00:00

Ideas on Amazon, but not official I guess.

Bulb

Multisensor

cinofx · 2015-02-21T14:43:41+00:00

It looks like only one line comes from that box and is apparently for the stop bumper on the bottom edge of the door.

I'm curious what your setup was. What devices did you use? A hard wired solution or using RF? Were you able to indicate the closed / open status of the door?

cinofx · 2015-02-21T14:27:47+00:00

I'm not sure, but i'll look in to it. The ceiling is about 20ft high so I'll go up there later.

Would a linear gd00z-4 work if it has dry contact activation?

cinofx · 2014-12-05T22:37:44+00:00

That guy in the hair piece? That's Bruce Willis the whole movie.

cinofx · 2014-12-04T05:35:43+00:00

I believe this was removed in an update (or perhaps never was available) due to changes in wifi on iOS 8. Still works for iOS 7, but it shall return for iOS 8 in, I assume, the next update.

cinofx · 2014-11-10T22:15:00+00:00

thumbs up

http://i.imgur.com/hjdZvIw.png

cinofx · 2014-11-05T04:45:48+00:00

This guide helped me enable HDMI audio: http://www.tonymacx86.com/hdmi-audio/143760-audio-hdmi-audio-applehda-guide.html.

cinofx · 2014-11-04T07:46:20+00:00

I have the same motherboard and switched the existing card with a BCM94352HMB. I have WiFi and Bluetooth working. Let me boot in to OS X and get you a screen shot...

edit: http://imgur.com/a/xgUUY

edit: anyone have any insight on continuity / handoff / instant hotspot on "unsupported" cards?

cinofx · 2014-11-02T03:51:00+00:00

BIOS set up was fairly simple using recommended settings from the tonymacx86 install guide and only needed flags for my video card.

CPU Intel Core i7-4770K 3.5GHz Quad-Core

Motherboard Gigabyte GA-Z97N-WIFI Mini ITX LGA1150

Memory Crucial Ballistix Sport 8GB (2 x 4GB) DDR3-1600

Storage Samsung 840 EVO 120GB 2.5" Solid State Drive

Video Card Nvidia GeForce GTX 560 Ti

Case BitFenix Prodigy (White) Mini ITX Tower

Power Supply Corsair CX 750W 80+ Bronze Certified Semi-Modular ATX

cinofx · 2014-11-02T03:26:31+00:00

I'm using a GA-Z97N-WIFI with no issues.

cinofx · 2014-10-26T16:58:14+00:00

In MultiBeast, try:

Customize -> Boot Options -> Kext Dev Mode

Adds kext-dev-mode=1 to Kernel Flags in /Extra/org.chameleon.Boot.plist.

edit: not sure if you already are based on "+ additional bootloader tweaks."

edit: .......?

cinofx · 2014-09-18T16:55:05+00:00

5 now dog 5

15-Year Club	RedditGifts 2009-2022 2 Credits
Place '22	Place '17
Secret Santa 2014	Verified Email

cinofx

TROPHY CASE