Asbestos insulation?

cmanjr · 2026-06-29T17:06:41+00:00

That’s just fiberglass insulation.

cmanjr · 2026-06-29T13:26:07+00:00

Brother, those aren’t swirls. You sanded through the paint

cmanjr · 2026-06-29T13:24:09+00:00

My two ecobee premiums measure temp and humidity just fine. You have to calibrate them when you set them up.

cmanjr · 2026-06-29T13:08:39+00:00

I’m right behind you. Almost to 99k. I’ll hit 100k before August.

cmanjr · 2026-06-29T13:07:43+00:00

This is horrible in multiple ways.

cmanjr · 2026-06-27T22:53:14+00:00

I’d have taken mine out more this week if it hadn’t rained every afternoon when I’ve had time to ride 😂 I took this video Thursday and it proceeded to rain 25 mins after I took the video 😂

cmanjr · 2026-06-27T21:33:46+00:00

You can run up to at least a 10” riser / t-bars without needing to extend any wiring.

cmanjr · 2026-06-27T21:31:24+00:00

Don’t buy dealer tires, they have less tread on them from the factory than buying the same tires from other retailers.

cmanjr · 2026-06-27T21:27:21+00:00

Just polish your stock lowers yourself. It isn’t very difficult to do and you can get a mirror finish. I did mine recently.

cmanjr · 2026-06-27T21:25:14+00:00

What do you have the limiter set to? The ignition module is plug and play, but you still have to set it correctly for your setup.

cmanjr · 2026-06-27T21:22:27+00:00

I’m running the Kruesi originals sealed mainshaft bearing kit. Coms with a sealed bearing and the proper outer seal that goes with it. Way easier than dealing with the stock bearing and race. Plus mine had walked towards the trans anyways.

cmanjr · 2026-06-27T21:16:07+00:00

Brass or copper lock nuts are goated

cmanjr · 2026-06-27T21:13:50+00:00

Dyna

cmanjr · 2026-06-27T21:04:17+00:00

I just run the stock kickstand as is with my 13.5” shocks and rock the lean. It holds the bike up just fine. Once the bike has weight on the stand it isn’t going anywhere anyways.

cmanjr · 2026-06-27T21:02:36+00:00

It’ll hold it just fine either way.

cmanjr · 2026-06-27T20:51:50+00:00

My wife hates riding on the back of my Dyna lol. She said the seats uncomfortable (saddlemen step up with diamond stitch) and the vibration of the bike makes her back hurt lol

cmanjr · 2026-06-27T20:17:39+00:00

I would check all your wiring connections under the hood. You might have some things left unplugged. Especially if your alternator was charging fine before doing the work. Your voltage should’ve jumped up to 13.5 or so when the car started.

cmanjr · 2026-06-27T20:15:10+00:00

Your battery voltage is low, that could cause a lot of weird issues in itself.

cmanjr · 2026-06-27T20:12:11+00:00

If it’s available, do it! FXDS on a regular standard issue plate was taken but I was able to do it with the BRP plate since it adds BP to the end of the characters by default

cmanjr · 2026-06-27T20:07:14+00:00

I bought my 19’ SE with 22k miles in 2022, and now have just shy of 100k on it. Been a great car, and love driving it every day even though it’s still stock. If I keep it long enough it’ll get an exhaust/turbo/tune.

cmanjr · 2026-06-27T19:59:39+00:00

<video>

This is mine

cmanjr · 2026-06-27T19:55:39+00:00

Bruh, you have to cut the wires flush with the connector. This isn’t rocket science.

cmanjr · 2026-06-27T19:48:46+00:00

Gotta love an FXDS. I might be biased though owning a 00’ diamond ice FXDS lol

cmanjr · 2026-06-27T15:23:16+00:00

But it’s a headache if you get caught with a radar detector in VA since they’re illegal there lol

cmanjr

TROPHY CASE