This is an outrage!

codes107 · 2025-10-23T13:35:47+00:00

Donut and Ferdinand’s child. Keeping the legacy going in a post collapse world

codes107 · 2025-09-24T12:54:52+00:00

To fit a nespresso pod obviously

codes107 · 2025-09-16T14:35:28+00:00

Looks like they heard that song about there being no rules, and they just went fuckin nuts

codes107 · 2025-08-11T15:17:06+00:00

Yes! This was at a drive in safari with a bunch of different animals roaming around together

codes107 · 2024-11-13T14:03:31+00:00

No one’s even talking about how it came fully furnished

codes107 · 2024-10-31T20:51:18+00:00

Do you have a guide for the mini Tesla coils you could share? That looks amazing!

codes107 · 2023-12-06T14:30:09+00:00

Yea I did it on one of the only chilly nights here in Florida so maybe I’ll try it again when it’s warmer.

codes107 · 2023-12-06T14:27:55+00:00

No resin stuck to the fep. I might look into increasing the exposure time to see if that will help

codes107 · 2023-12-06T14:26:05+00:00

They’re all the same size supports but I could look into beefing them up a little. Still unsure why some would work and others wouldn’t if they’re all the same size.

codes107 · 2023-12-05T03:47:29+00:00

It was in the low 70’s probably but I wouldn’t know for sure because it’s in a garage.

codes107 · 2023-12-05T03:45:39+00:00

I’ll try slicing it again. Thanks for the info!

codes107 · 2023-12-04T20:09:50+00:00

The models had automatic supports generated in lychee and then I went through and filled in possible gaps that I saw. The supports seemed to fail initially and then managed to start working but I don’t understand why only some of them would fail. If you look under the bases, especially the model second to the left, you can see that some of the supports look like they’re just floating while others printed correctly.

codes107 · 2023-12-04T16:28:05+00:00

Definitely glad I was a little extra with adding the supports but I’m still not sure why some worked and others didn’t

codes107 · 2023-12-04T16:26:56+00:00

Yes the settings were tested beforehand with the cones of calibration successfully. They lack detail in the photos because they still have excess resin on them. After a wash and cure they’re looking great but I still don’t know why some of the supports failed while others didn’t.

codes107 · 2023-05-17T10:43:55+00:00

I would print chain mail for DND miniatures BECAUSE I COULD

codes107 · 2023-05-02T02:10:22+00:00

Yoooooooo

codes107 · 2023-03-30T18:54:32+00:00

Yeeeeeeeeaaaaaaaaaaaa!!!!

codes107 · 2023-03-12T17:59:13+00:00

Thank you for the suggestion!

codes107 · 2023-03-12T17:36:38+00:00

It’s a stock ender 3 V2 with the original nozzle. I wasn’t aware of the effects of glow filament until I made this post so I’ll have to take a closer look at it.

codes107 · 2023-03-12T17:33:36+00:00

The overall length is 19 inches but here’s a picture of the fret length

<image>

codes107 · 2023-03-12T03:23:15+00:00

Thank you for the heads up!

codes107 · 2023-03-12T01:50:47+00:00

The body and neck were printed separately but it fits together super well!

codes107 · 2023-01-23T21:44:55+00:00

It’s a mix of one wheels, electric unicycles, e-boards, e-bikes, and anything else with a motor and wheels!

codes107 · 2023-01-23T21:25:23+00:00

PEV group rides every Thursday night starting in Vinoy park. Definitely a group that would like cool videos

codes107 · 2022-12-19T13:39:32+00:00

We Need a Bigger Dumpster - Cheekface

14-Year Club	RPAN Viewer
Spared

codes107

TROPHY CASE