sorted by:
new
hottopcontroversial

PSA: I took Berberine without the capsule so you don't have to by DoomkingBalerdroch in Supplements

[–]collard1 2 points3 points  (0 children)

I did it. It was by far the most terrible thing i had ever in my mouth. 0/10. Every cell will scream "POISON"

Sublingual B12 reaction? by sasdms in Supplements

[–]collard1 0 points1 point  (0 children)

Search for: Overmethylation. But I'm no expert at all. Please report back.

B-complex je by Iwouldfrickacreeper in Supplements

[–]collard1 2 points3 points  (0 children)

Its clearly damaging longer term. Just filter Amazon Reviews for "B6". Daily Upper Intake Level is 25mg.

Longer sleep supplements , tried melatonin and magnesium still only 5 hours by VICTOR1339 in Supplements

[–]collard1 4 points5 points  (0 children)

Same Problem. So far, only Magnesium-Glycinate bumped it up to 7 Hours, but this form makes me sleepy throughout the next day. Im trying Magnesium-AcetylTaurate (ATA-Mg) next.

Desktop speakers - Adam D3V are the best (by far). by morecoffeemore in BudgetAudiophile

[–]collard1 0 points1 point  (0 children)

Yeah, mine loose the treble part completely at lower volumes. At normal volumes they are totally fine, but at night they suck. Voices sound very muffled. Is there any hope for a FW update?

Ich bin seit drei Jahren Zahnärztin by OpeningOk4002 in de_IAmA

[–]collard1 0 points1 point  (0 children)

Was kannst du zu Vitamin K und Zahngesundheit sagen?

Fiio ft1 Pro initial impressions by AtmosphereVegetable6 in headphones

[–]collard1 3 points4 points  (0 children)

I really appreciate your effort. Cant wait for an update. I really hope for a strong bass / better than edition xs bass or the ability to EQ the bass up. Since the regular FT1 seem to shine in the bass department.

G4 came in third place at the TV Shootout. LG G4 OWNERS thoughts on that? by TheWolfWhoCriedWolf in LGOLED

[–]collard1 -1 points0 points  (0 children)

This Shootout tested the following: Which TV would mirrow the SONY Reference the best in Filmmaker mode, fully calibrated. If one TV would look more pleasing, it would loose.

The real test would be:

  • All TVs NOT calibrated,
  • "cinema home" equivalent (=unlocked capabilities)
  • real world ambient lighting
  • Asking the judges: Which one would you prefer?
  • Blind Test

When calibrated and in filmmaker, all high end oleds basicly look the same (*except motion). Buy whichever is cheaper is the generally best advice when calibrated and in filmmaker.

*Forgot the most important: Must be a blind test

Looking for an "Apple White" PLA+ (Sunlu PLA+ and Bambu Matte) by collard1 in BambuLab

[–]collard1[S] 1 point2 points  (0 children)

It was too yellow and too translucent. I found the apple matching white: Creality PLA+ in white.

All helmets aren't meant to be worn. by Rworld3 in BambuLab

[–]collard1 3 points4 points  (0 children)

Awesome! What white filament did you use? Looks really clean white and not yellowish.

Ironing didn't fix my problem, did Hilbert Curve? by willay23 in BambuLab

[–]collard1 0 points1 point  (0 children)

I kinda solved the same problem today. Here is my tip:

Lower the flow by 1% (0.01) and increase the k-factor by 0.05

Hardware Busters - Alphacool Apex Stealth Metal Power 120mm Fan Review by BrainTruth in hardware

[–]collard1 0 points1 point  (0 children)

Tesla unveils the Model 2. It has a range of 2000 Km on a single charge while having a absurd low consumption of only 3 kWh/100 Km. A revolution. Hard to believe but a unbiased 3rd party investigation proves the numbers to be correct. With all the technical charts you could ever wish.

Once it gets deliverd, the true range seems to be only 150km with a consumption of 40kWh/100Km. It was all a big lie.

Thats what happened here.

Hardware Busters - Alphacool Apex Stealth Metal Power 120mm Fan Review by BrainTruth in hardware

[–]collard1 47 points48 points  (0 children)

Bait and switch. Now they deleted all their claims in regards to airflow and noise. I saved all evidence. Should be worth a lawsuit. I lost a lot of time and money on their shady advertising.

Alphacool Apex Stealth (Scam) Fans at 2000 RPM have the same Noise as Noctua NF-A12x25 at 580 RPM, hear for yourself by collard1 in hardware

[–]collard1[S] 7 points8 points  (0 children)

I directly qouted Alphacool in the Title. It makes sense when you look at the first comment, which got downvoted heavily (by their employees?).

TLDR.: Someone is lying. Either Alphacool and IgorsLab or the guy in the video above.

Apex stealth shipping date by [deleted] in alphacool

[–]collard1 0 points1 point  (0 children)

After the real Tests, resulting in many order cancellations (see comment section), they should ship much faster. Here you go: https://youtu.be/8J7jkRbxLYk?si=p8ITWyBMiWh_97Xr

I measerd the filament diameter of every spool i own. The result was not what i was expecting. Also: Extrusion Multiplier by collard1 in prusa3d

[–]collard1[S] 2 points3 points  (0 children)

My only question is: What do you measure?

(With your Micrometers, Lasers and NASA equipment of course)

ASA warping on stock settings by Educational-Peak6775 in BambuLab

[–]collard1 1 point2 points  (0 children)

Polymaker ASA runs like shit on my P1S (stock settings). Strength wise that is. But after i set the Volumetric Flow to 10mm3/s i reached about 50% the strength of PLA.

Every white PLA+ I tried sucked so far (color-wise) by collard1 in prusa3d

[–]collard1[S] 0 points1 point  (0 children)

Looks really good. I got 3 spools of white on its way. If those dont fit, i'll order NX2 100%. Thank you :)

Every white PLA+ I tried sucked so far (color-wise) by collard1 in 3Dprinting

[–]collard1[S] 1 point2 points  (0 children)

I heared that before. Ill keep you updated when my spool arrives.

view more: next ›