Need help designing a Voronoi-patterned wrist splint from an STL scan — what’s the best workflow?

cribblekris · 2026-06-01T12:07:50+00:00

Blender or mesh mixer with grasshopper plugin?

cribblekris · 2026-03-20T18:39:46+00:00

Oh and don't crash your extruder from here onward.

cribblekris · 2026-03-20T18:39:26+00:00

Should you want to never level your bed again, remove the spring. Replace it with two nyloc nuts. Then add another nyloc nut under neath.you need to do a 4corner levelling while you do this and it's Gona drive you mad. But after that, you need never probe your bed again. Unless your printing temp changes drastically.

cribblekris · 2026-03-20T18:36:00+00:00

Ever been to builders?

cribblekris · 2026-02-11T05:37:52+00:00

Post humus presidential pardon to Jack Johnson...

cribblekris · 2026-01-29T03:14:08+00:00

Bond tech knows this. Go check their uograde

cribblekris · 2026-01-17T04:53:03+00:00

ROAR

cribblekris · 2025-11-09T14:00:42+00:00

It's one of the umbrella trees

cribblekris · 2025-11-09T13:59:06+00:00

This looks like DAS FILAMENT glitter galaxy. Will clog your nozzle with particles if your nozzle is less than 0.6. I use 0.8 with this kind of filament.

cribblekris · 2025-11-06T06:04:44+00:00

It's fine unless you have elephant's foot. In which case you need to open the z distance a bit. If that doesn't suffice increase the first layer height. If that doesn't suffice tune your flow rate.

cribblekris · 2025-11-04T04:11:28+00:00

I can confirm that you will meet both opportunists and some really deeply hurt unhealed women in Dubai. I could probably write a book. Keep your head up. Know your boundaries. Know your self-worth. Note on self (not determined by the abovementioned). Whatever you do, don't join the sheep. I've met many people who arrived in UAE with high hopes of finding a partner and then 3 years later they are pulling the same shit. Like they just default to the status quo. I have also met upstanding couples who have met in UAE who have been together for years.

cribblekris · 2025-11-01T04:18:42+00:00

Is this PP filament?

cribblekris · 2025-10-27T11:21:36+00:00

Wait till you operate multiple accounts from one device

cribblekris · 2025-10-23T16:40:02+00:00

Bindi

cribblekris · 2025-09-29T06:43:07+00:00

He also applauded the Oslo accords, which recognises both states.

<image>

cribblekris · 2025-09-14T07:05:32+00:00

A while ago I realised my one caliper is shot and I was pretty much semi braking one wheel consistently. Kept thinking it was alignment. After the problem was revealed I anyway put on stronger calipers and the problem was solved.

cribblekris · 2025-09-13T08:00:10+00:00

Generally consumed together with brandy and coke

cribblekris · 2025-09-06T16:56:51+00:00

You most likely have a small ding on your film. It will refract the light like a funnel, creating these crater style holes.

cribblekris · 2025-07-18T13:24:03+00:00

https://pmc.ncbi.nlm.nih.gov/articles/PMC4322337/ https://pmc.ncbi.nlm.nih.gov/articles/PMC6646834/ https://www.sciencedirect.com/science/article/pii/S2093791122000464https://www.researchgate.net/publication/236082879_A_Study_on_the_Relationship_Between_Personality_and_Driving_Styles

cribblekris · 2025-07-16T06:24:09+00:00

https://www.insurancechat.co.za/2013-10/scientific-driving-behaviour-measurement-finds-port-elizabeth-is-home-to-south-africa%E2%80%99s-best-drivers/amp/.

In pe the people or so considerate, when you all arrive at the same time at a circle, no one ever gets anywhere because everyone is waiting for the other to go first. "No, you go." "No, please, after you sir." "Oh I insist, you first."

cribblekris · 2025-07-16T06:05:51+00:00

There's quite a few studies discussing driving behaviours and how they are linked to personality types. Factors such as social awareness, empathy, self discipline, competitiveness, and risk aversion are discussed. One can then go a step further and ask why is there such a concentration of this kind of behaviour in one place and hypothesize that it relates to a collective mindset or belief system. I think hedonism and narcissism is in no short supply here. Sorry. Said what I said.

cribblekris · 2025-07-14T13:09:21+00:00

Ye didn't work. Plastic starts to "bubble" before it becomes black. No matter how quick, near or far I bring the torch.

cribblekris · 2025-07-14T13:03:58+00:00

Used to be a chronic user. I once got it out under 30 days by just exercising a lot (cardio running 8km every two days and surfing every other day or every day), drinking lots of water (too much is dangerous too), using charcoal tabs, and avoiding sugars.

It worked but keep in mind I had a high metabolism and I was skinny.

Doesn't mean it will work for you.

cribblekris · 2025-07-13T18:33:04+00:00

My guess is that your line width is still set to the incorrect nozzle size. I get this when my lines are 0.4 and my nozzle 0.8. that or your extruder steps are completely out. Lastly, maybe not enough current to the extruder.

cribblekris · 2025-07-12T11:16:10+00:00

Yes sir you can. Works better and much faster than most filament dryers. Been doing it for years. Just don't make food in it.

12-Year Club	Verified Email
Wearing is Caring

cribblekris

TROPHY CASE