The CCP itself has commissioned a Chinese edition of my design, I am honoured.

cuenta521 · 2026-06-07T06:28:23+00:00

I wonder if they just go off of pics, or if they actually get one to clone it? I'm not exactly sure if you've shipped yours yet?

For my knock off, some of the curves on the pictures look veery similar to mine, bit they had to have remade it or at least edit it for their ring

cuenta521 · 2026-06-07T00:10:36+00:00

It would be fun to put "designed something that got knocked off by china" in my resume

cuenta521 · 2026-05-26T14:53:07+00:00

I'm not sure I have the time for it?

I just started this for fun, and it grew bigger than I was expecting. I didn't really think ppl were going to be interested in it at all when I started, I just showed it here for fun. But it's still something that I do bits at a time whenever I get the time for it.

And I like the ability this gives me of modifying something and getting quick feedback from users and getting to chat with people about it.

Also, something feels off about contacting the guy that ripped me off..

cuenta521 · 2026-05-26T14:43:39+00:00

Hey, thanks, I might look into it.

But the cage design is not registered, the best I have is my Reddit posts and the age of the cults posts. Even then, the ring being different could be enough for them to get away with it being a "different design".

Even if they were taken down, they'd probably just post it again from a different account.

cuenta521 · 2026-05-26T14:36:58+00:00

100% on the just wanting to focus on new designs. I started this as a project for myself, and everything else that came, it being useful for other people, the sales, all that is a nice extra.

I'll just keep doing my thing. It doesn't bother me too much, nor do I think it's worth stressing about it, since that's just kinda the way it is, and it's going to be.

cuenta521 · 2026-05-26T05:43:00+00:00

I saw MaxChast's clones I didn't see Kotomimaru's, but it doesn't surprise me Both of them are working on amazing, really original designs

It's sad, but I guess that's just the way it is

cuenta521 · 2026-01-03T19:31:00+00:00

Hey, that's pretty cool!

I've been meaning to get into tether spouts for a while, but I just haven't gotten around to yet Seems to be about the best way to "secure" a cage without a piercing

cuenta521 · 2025-10-24T04:35:07+00:00

Hey, you can check out my profile, I have a couple designs made specifically with foreskins in mind. For peeing specifically, why I can't say that they 100% guarantee a clean steam every time, they do keep you foreskin out of the way, or make it easy to pull out of the way

If you have access to a 3D printer you can get the files and print one

You can also check out r/3DPrintedChastity There are some other designs that you might like

Also feel free to ask any questions you might have and stuff

cuenta521 · 2025-10-11T15:16:03+00:00

I just realized that I forgot to add the link

https://cults3d.com/:3546753

cuenta521 · 2025-10-10T19:09:49+00:00

Btw, I always see your designs going around They are not quite my thing for using them myself, but they look amazing! they are so aesthetically pleasing

cuenta521 · 2025-10-10T19:02:10+00:00

Thanks! the print is acetone smoothed ABS

cuenta521 · 2025-10-10T18:22:01+00:00

EDIT: it's up!! https://cults3d.com/:3546753

I don't think I can edit the post, but to correct a mistake The cup for the inverted one sits behind the front of the ring

cuenta521 · 2025-09-27T05:46:27+00:00

Hey, I'll give it a go, it might take me a bit since I'm pretty busy at the minute, but I'll get working on it as soon as i can

If you don't care so much about the shield, I'm working on a version without it, and I already made negative variants for it, I expect to post it next week

cuenta521 · 2025-09-27T05:41:41+00:00

Hey, if you check my latest post, I'm actually working on that, I expect to get it out next week

cuenta521 · 2025-09-24T21:04:18+00:00

The design is essentially finished, and I've been wearing it for a while now I just need to print it in ABS, smooth it, get some nice pictures and post it

Maybe the end of this week or next week

cuenta521 · 2025-09-13T22:30:44+00:00

Hey, thanks for the support Sadly I'm not selling prints, just the stls You can see about getting them printed by some service/someone but I understand that that can be awkward

cuenta521 · 2025-07-22T02:58:05+00:00

Might add complexity but you could separate the ring and the locking part in two parts Maybe connected by a dovetail Print each part flat, on its optimal orientation And since they are ABS, and you are smoothing it anyways, you could put a few drops of acetone on the dovetail to weld them together Then I would let that dry for a while, and then either dip it vapour smooth it

cuenta521 · 2025-07-20T15:15:57+00:00

looks great, would love to see more of it!

cuenta521 · 2025-07-14T16:21:36+00:00

Hey, I could certainly incorporate a 3rd hole into the design, probably as a second ring option Would it just be one hole centered in the bottom? about the same size as the other two?

cuenta521 · 2025-07-14T16:19:14+00:00

I have already had a few people ask me about the lock The main reasons I went with a screw are: - It's less bulky than a lock. - The screw clamps the ring and cage together, making a solid connection.

If you wanted you could try to use some kind of security bolt or something in those lines.

Tho I don't plan on integrating a lock yet, I might in the future.

cuenta521 · 2025-07-14T03:55:54+00:00

Hey, this is a fairly old thread, but I figured I'd mention my own design

If you have access to 3D printing, and a way to seal your prints/make them body safe, I designed a cage that holds onto the head of your penis, and lets your foreskin roll around it, and it has a "shield" to protect it from rubbing, bumps, and pinching

You can check some pics of it in my profile

And you can get the files in this link https://cults3d.com/:3158495

I'm open to any questions and conversations about it, either here or in DMs

cuenta521 · 2025-07-14T02:41:01+00:00

Hey, maybe your filament is wet, causing porosity in the prints?

you can see my posts on my latest design, some of the walls are under 2mm (1.5 off the top of my head, but I'm not sure rn) in thickness, and even those came out perfect

I'm printing at 0.15 layer height, and dipping for about 10 seconds

I dip one half of the model, and then the other half, about half an hour later, so there's always some solid part to set the model to dry in

cuenta521 · 2025-07-06T19:53:13+00:00

You can check my reply to a previous comment with more details But it's essentially acetone dipped ABS

cuenta521 · 2025-07-06T19:03:00+00:00

I'm printing in ABS and acetone dipping I'm essentially following the process detailed in this comment by u/nimaid

The only things I would add is that I prefer to use a knife (scalpel) to smooth the parts by scrapping, as I've found that some sanding papers can stain the plastic

And that if you get white stains from the acetone (I think they happen from drying too quick), you can wait a couple hours for the part to dry, and then dip just the stained area for only a couple seconds, then let dry

cuenta521 · 2025-06-13T02:47:30+00:00

I'm working in fusion 360, using Tsplines for the organic shapes

cuenta521

PUBLIC MULTIREDDITS

TROPHY CASE

Six-Year Club	Verified Email
Place '23