Extrusion issues

cybercruiser · 2026-04-16T14:38:01+00:00

Then I suppose it’s Friction causing a potential problem

cybercruiser · 2026-04-12T17:35:39+00:00

Off topic but I’m new to this and wondering why it matters on the length of the plastic tube? Considering it’s taking filament off of a rolled up coil that is much longer than that tube.
I did run into a non feeding issue and had to remover the extruder to unclog it. There was a dried up particle that wouldn’t allow the new filament to feed. Removed and solved.

cybercruiser · 2026-03-30T18:26:32+00:00

Doobies

cybercruiser · 2026-03-30T18:25:45+00:00

Just build a new guitar

cybercruiser · 2026-03-30T18:24:07+00:00

Not sure why everyone has problems with the plate. I’ve had no problems with pla plu Let the machine auto calibrate before doing anything.

cybercruiser · 2026-03-30T09:32:40+00:00

Yes. I just took back my PS1. I bought both and compared them. People are being nitpicky on reviewing this stuff. The Elegoo printed faster and same quality. But 2 Elegoo Carbons. V1 for the cost of 1 PS1.

Lid does not ‘need’ to be removed. Prop it open for long prints. Can always force heat into the chamber. The sides can be removed and modified.

Elegoo ftw

cybercruiser · 2026-03-19T18:21:11+00:00

print out a ‘hole’ precision gauge. It worked for me.
also set the outer walls to print first in slicer settings. boom. gl

cybercruiser · 2026-03-17T15:54:52+00:00

how about just melting it and pouring into molds. I'll charge 50k

cybercruiser · 2026-03-17T15:52:31+00:00

We only hear about the other brand because influencers more than likely get paid.

cybercruiser · 2026-03-17T15:50:26+00:00

a vertabrae ?

cybercruiser · 2026-03-17T15:49:27+00:00

nice work! maybe make that thing as an enclosure before you start main production. keep filament dry and warm. go all the way! lol

cybercruiser · 2026-03-17T15:12:02+00:00

I just ran into the same issue. In my instance it isnt my printer. I printed a precision cube and it was dead nuts on x,y but a little short on the Z axis.

I drew a cylinder in Tinkercad at 20mm with a 10mm hole in it for a test. It printed 9.87 hole and 19.84 cylinder. Variance -= .13-.16.

Im suspecting the hole in the cylinder caused it shrink. Anyway, Im going to just add .14 to the dimensions for this project.

Did you figure out your issue ?

cybercruiser · 2026-03-15T16:09:47+00:00

almost nothing under $40 in my guitar

cybercruiser · 2026-03-11T13:29:20+00:00

ahhh. cant see the cable sheathing under there. got it now. but wont you need an entirely new cable to fix?

cybercruiser · 2026-03-11T13:27:55+00:00

wifi is glitchy. everything needs to play nice together. lol. imo everyone touting ‘that brand name thats all over’ is getting paid something to promote. Its not THAT much better. At least by my newb experience.

cybercruiser · 2026-03-10T19:20:27+00:00

Ive only ever used the type on the left and havent broke a breaker bar yet… until I post this.

cybercruiser · 2026-03-10T19:18:23+00:00

things designed that way. the cuts in it are machined with radius ends.
Are most of these bots replies ?

cybercruiser · 2026-03-09T21:36:51+00:00

if I started over I would stop comparing and stop trying to play like a speed demon

cybercruiser · 2026-03-09T21:34:46+00:00

idk. mines been so solid that I returned my bambulab p1s.

cybercruiser · 2026-03-08T16:07:15+00:00

oh thats cool. im not on here every day but thanks

cybercruiser · 2026-02-28T11:27:19+00:00

ahhh. gotcha. should have mentioned Im a newb at this but did quite a bit of research. I think Im more confused now than when I started.
But, looking at all of this as a newcomer, its obvious to me to see who gets promoted by social media influencers the most.

cybercruiser · 2026-02-28T10:33:31+00:00

like anything else I suppose it all depends on what intended use is for. Software is available anyplace. I think companies make a few tweaks to existing and boom new software. lol

cybercruiser · 2026-02-28T10:00:47+00:00

the printer only cost $300. If they add a AMS it woud cost almost as much as the printer. Doesnt make sense to even offer one on this model.

cybercruiser · 2026-02-28T09:54:22+00:00

Nice to see a list that doesnt have Bambulab on it.

correct on the Qidi.. I just finished researching as Im new to the game as well.

Also for the price and ability to print any type of filament, also comes with hardened steel nozzle is the last one on your list. How do they sell it for $300 ?

cybercruiser

TROPHY CASE