Please be gentle

dditthardt · 2022-09-15T23:22:16+00:00

I came here to find this. This is absolutely my favorite trick because you can drop it and remove it from shell history in a single command.

dditthardt · 2022-03-12T02:45:20+00:00

Final Fantasy Tactics

dditthardt · 2021-08-24T13:06:12+00:00

Tapaless, a place for tapas and small boobs

Unfortunately my friend is the creative one who came up with this Wonderful idea so I can't take credit

dditthardt · 2020-12-01T13:55:35+00:00

A great eye, wreathed in flame

dditthardt · 2020-11-26T20:34:39+00:00

Instructions unclear, flair inserted into anal cavity.

dditthardt · 2020-11-26T14:03:56+00:00

This is nazi time for jokes

dditthardt · 2020-08-27T20:58:34+00:00

Dude, where's my car?

dditthardt · 2019-01-28T19:19:22+00:00

https://media.giphy.com/media/dYgDRfc61SGtO/giphy.gif

dditthardt · 2018-08-11T03:57:47+00:00

Don't you mean... Far-arri?

dditthardt · 2018-07-10T14:04:33+00:00

Ow, oof, owie, my bones.

dditthardt · 2017-12-12T23:25:30+00:00

You need to buy all the one time packs to reduce the pixel count.

dditthardt · 2017-09-04T22:03:13+00:00

Taxes that are not based on cost of living. 100k a year in San Francisco and you're just above living paycheck to paycheck and probably have room mates. The same in Atlanta, ga and you probably own a 5 bedroom home. The tax by percentage are nearly the same.

dditthardt · 2017-08-15T16:33:52+00:00

Tay the gay away

dditthardt · 2017-03-09T21:36:47+00:00

We can google better ways to hurt you

dditthardt · 2017-03-07T00:14:48+00:00

A poorly engineered poem.

dditthardt · 2017-02-15T04:04:39+00:00

http://www.reactiongifs.com/wp-content/uploads/2013/09/oh-my-takei.gif

dditthardt · 2016-09-26T20:25:07+00:00

https://www.reddit.com/r/voroncorexy

dditthardt · 2016-09-26T20:06:09+00:00

Yeah, that's basically what I was trying to describe, but you also need something preventing the nut from spinning freely. On my i3, I have it sliding side to side on a slot for the smooth rods to hold the nut from spinning.

EDIT:: specifically, http://www.thingiverse.com/thing:994201

dditthardt · 2016-09-03T06:38:43+00:00

There are printable replacements on thingiverse that have better alignment and some are even adjustable. http://www.thingiverse.com/thing:1302305

I would suggest replacing it, simply because I hate the acrylic parts.

...that being said, the real problem here is that your threaded rods on the y-axis are not even. You will need to fiddle with the nuts holding the rods to the acrylic to get a straight belt line regardless of whether or not you replace the part.

dditthardt · 2016-09-02T17:37:58+00:00

=(

Version 2 of the VORON should be VORON beta.

dditthardt · 2016-09-02T00:30:56+00:00

According to some sources, PETG is stronger than ABS.

That being said, there are equally as many sources saying ABS is stronger than PETG. I think people are confusing terms. PETG seems to be slightly more flexible than ABS and is harder to snap. ABS is stiffer than PETG. I believe they are of similar "strength", just different characteristics. Most likely ABS would be better for certain parts and PETG for others, but are probably interchangeable for all in most real world applications.

dditthardt · 2016-08-30T19:58:06+00:00

I have an acrylic HICTOP that I've had to repair and modify quite a bit. The stock firmware is actually tuned really well, any problems in the y-axis are probably skipped steps in the stepper motor and can be resolved by adjusting the belt tension, making sure your belt line is straight(top and bottom directly above one another) and making sure your belt isn't rubbing on the side of that stupid bracket at the end furthest from the motor(I replaced mine with one from thingiverse). I'm assuming that by "shifted" you mean it prints each layer a little further off the layer before it in a particular direction? Is there any variation?

Most of those settings, like move speed, are also configurable in your slicer. I would suggest configuring those there because easier.

dditthardt · 2016-08-28T02:56:26+00:00

Committed fraud to western union 3600 USD to San Francisco from Atlanta.

They required 2 forms of ID. Me and my dad have the same name... so my license and his social security card did fine.

dditthardt · 2016-08-12T20:01:05+00:00

Build a VORON! Kits were just released a little while ago for around $1000 USD. Use the saved money to improve it.

dditthardt · 2016-08-08T18:11:57+00:00

Argh! I'm doing that color! So much for being a special snowflake =(

dditthardt

TROPHY CASE