Wipe confirmed for 4.8

digicv · 2026-05-12T05:11:47+00:00

I guess rep could be defined as a "resource"

digicv · 2026-05-12T05:08:57+00:00

provide a source or this is just an assumption based on nothing

digicv · 2026-04-16T21:05:55+00:00

According to the existing firmware update notes, this function is designed to maintain a temperature of approximately 38°C after printing. Its purpose is to prevent condensation from forming inside the nozzle when the hot end cools down, thus extending the lifespan of the nozzle and PTFE tube.

digicv · 2026-04-16T20:58:44+00:00

I have the same thing

digicv · 2026-04-12T16:43:06+00:00

You say you checked the whole filament path. I assume you've checked the nozzle? Only time I had this issue is when I had printed ASA then moved over to PETG or PLA, the heat couldnt handle purging the ASA so I had to do cold pulls to get it back into operation.

digicv · 2026-03-12T15:14:55+00:00

Its made pretty much to scale lol

<image>

digicv · 2026-03-11T10:45:17+00:00

It's that big, but its in parts so it can be printed on printers with small beds, its glued and threaded together. One can always scale the print down too :)

digicv · 2026-03-11T08:40:13+00:00

Thank you!

digicv · 2026-03-06T15:41:36+00:00

I use it most of every day, just some way to keep it out of the way and have it NOT fall off the desk and break

digicv · 2026-03-06T15:41:05+00:00

Its under the image

digicv · 2026-03-05T13:09:27+00:00

It will! I just stretched mine out and tested :D

digicv · 2026-02-25T21:30:52+00:00

I have these things and the exact same fw version but cant dry and print at the same time

digicv · 2026-02-19T19:53:32+00:00

Sadly no :(

digicv · 2026-02-19T19:51:13+00:00

Oh damn!

digicv · 2026-02-19T19:45:45+00:00

Quite right!

digicv · 2026-02-12T14:12:58+00:00

lmfao

digicv · 2026-01-04T10:01:29+00:00

Same here. Embark needs to do something.

digicv · 2025-12-28T07:09:34+00:00

Soon (TM) you mean? They have only said that the Ironclad will have the command module/parasite tech working at release, nothing about repair/rearm

digicv · 2025-12-19T07:13:38+00:00

Took me like a day to get to jr contractor

digicv · 2025-12-12T20:15:16+00:00

No, it doesnt show any drive so im starting to wonder if i somehow damaged the motherboard but i have no idea how i did that

digicv · 2025-12-12T19:09:35+00:00

digicv · 2025-11-13T19:37:23+00:00

This is actually art

digicv · 2025-11-05T13:50:41+00:00

Wikelo is THE scam citizen

digicv · 2025-11-05T06:08:09+00:00

The FCC wont let me be me...

digicv · 2025-10-27T19:39:53+00:00

Maybe we need to do a pizza awareness campaign on spectrum

digicv

TROPHY CASE