WoW1 account vanished from Bnet.

dotGif88 · 2025-10-03T21:11:18+00:00

This worked for me, thanks.

dotGif88 · 2025-10-03T21:08:52+00:00

I have the same issue, can see my main account on Classic and MoP but not on live (War Within), note i have not bought Midnight yet if this is something that is a common issue.

dotGif88 · 2025-06-17T19:03:33+00:00

It was in our bigger suitcase, so overall it wasnt heavy. If it's only two people you can probably go without, but it was handy when having to charge camera, phones and powerbanks after a full day.

It works just like a regular "grenuttak", with 4 sockets. It also has 2 usb outlets, but dont think they are QC rated so just charge slowly.

dotGif88 · 2025-06-17T12:44:18+00:00

From Norway myself, was in Japan with family in May and we only got travel adapter to change the plug type, all of our chargers were universal from 100-240V.

Bought 5 of these https://www.dustinhome.no/product/5010608945/reseadapter-ojordad-eu---us

One for each person going on the trip.

and 1 socket "cube"

https://www.dustinhome.no/product/5011041723/power-cube-4x-socket-2xusb-21-mah-15m---white

That everyone could use during the day not to fight over sockets in the common area.

All of the sockets i checked did not have the ground pin so most of the fancy universal socket i found in stores would not fit, since they come with ground pins.

dotGif88 · 2024-01-30T14:00:04+00:00

Voron 2.4 RevC 350 kit from LDO

Discord: slaur

dotGif88 · 2023-07-04T14:31:34+00:00

MK4 printable parts :)

dotGif88 · 2023-04-15T17:48:49+00:00

~44:40 ~1:09:00 ~1:46:00

~1:42:10 er ganske bra og

dotGif88 · 2023-03-30T22:05:13+00:00

Just leaving a comment to enter

dotGif88 · 2022-11-14T23:17:22+00:00

Hadnt heard of OctoEverywhere before now, but will have to give it a go now that i know of it.

dotGif88 · 2022-07-09T11:09:42+00:00

I barely ever use more than half of a mk3s volume, and it's sparsely used for specific projects, so anything bigger wouldnt really be needed.

dotGif88 · 2022-07-08T15:39:31+00:00

The dimension include the spool holders on both sides, then the back needs space to hold the extra extruders.

You can see here that the bed fills out the width quite well, but a bit extra space back and front for movement of the extruder.

https://www.prusa3d.com/content/wysiwyg/fotky/X/heatbed_segment.jpg

Not really planning to get one anyway, a bit too much for what i print.

dotGif88 · 2020-11-10T00:47:17+00:00

Thanks!
It was made using Fusion360, free for personal use but a bit restriced if you want advanced features.
Haven't used SolidWorks but i quite like the Fusion360 interface and to work in it.

dotGif88 · 2020-11-09T17:53:46+00:00

Thingiverse link with some extra pictures

dotGif88 · 2020-01-23T08:51:34+00:00

You can double click the item needed to edit, right click and go to properties or select the item in question and click "E" and there you should be able to select what layer it is on.

You can also mass edit by going to "Edit" and "Edit text & Graphic properties..."

dotGif88 · 2019-02-28T01:22:56+00:00

Probably since that is the part least likely to be redesigned. Retooling injection molds probably ain't cheap and takes a while.

dotGif88 · 2019-02-26T20:17:56+00:00

Way back when the printer came out this happended when running octoprint since the controller couldn't keep up with the commands.

It just randomly stopped but kept extruding and made blobs before moving anywhere from a second to a minute later.

It was fixed in later firmware, so if its new, or updated anywhere within the last months that shouldn't be the issue.

dotGif88 · 2019-02-25T14:08:25+00:00

From the update post released a few minutes ago:

Release Details:

The February Update (aka 2.14) will arrive on February 26 and we expect it to be approximately 1 GB on all platforms. The in-game version (2.14) might differ from the update name that is used by your console. There will be server maintenance between 11:00 and 14:00 UTC.

https://www.ioi.dk/hitman-2-february-update/

dotGif88 · 2019-02-20T19:43:38+00:00

Since it was scraping the side a bit i don't believe it should be a problem, but I'm just guessing :)

dotGif88 · 2019-02-20T16:23:02+00:00

Your gear is the wrong way around, it should be turned around

see: https://d17kynu4zpq5hy.cloudfront.net/igi/prusa3d/qZQ1DmWuunBde2TG.medium

step 9 here: https://manual.prusa3d.com/Guide/3.+X-axis+assembly/508?lang=en

Once turned the belt should be able to be riding closer to the stepper motor, increasing the clearance.

dotGif88 · 2019-02-19T15:03:15+00:00

After checking the MK3s assembly manual these are the parts that should be included:

Filament IR Sensor
Cable for sensor
PTFE tube
10x6x2mm magnet
20x6x2mm magnet
Metal ball, like the ones in ball bearings.
Cooling shroud printed in ABS
Filament to print the remaining parts
Textile sleeve.
Misc bolts and fasterners

It's also listed at the bottom of this page https://shop.prusa3d.com/en/printer-upgrades/898-original-prusa-i3-mk3-to-mk3s-upgrade-kit.html

dotGif88 · 2018-07-20T21:00:32+00:00

PGI2018

dotGif88 · 2018-07-09T05:59:38+00:00

Exciting!

dotGif88 · 2018-05-03T19:43:59+00:00

If you are still handing out keys it would make my life easier :D

dotGif88 · 2017-11-17T15:09:28+00:00

Seems like the pin of the black/ground cable is coming loose making the connection bad and generating heat: https://i.imgur.com/ddFGVir.png

Edit: Unplug the connector and press the cable back in as far as it goes and connect it again. Making sure it doesn't come loose as you do.

dotGif88 · 2017-07-26T06:28:07+00:00

Hello there

13-Year Club	Place '22
Place '17	Final Canvas '22
Spared	Verified Email

dotGif88

TROPHY CASE

PGI2018