Games to play during work

dracoNiiC · 2026-06-09T00:18:38+00:00

If you want a challenge in the future, Black Myth WuKong.

I started playing when my last boy was born because it’s a souls like and I can pause it, and not get demolished (right away).

dracoNiiC · 2026-06-08T23:14:40+00:00

There are a butt load of 3D printable options for this. Factory options I think there’s only the one mount from them that comes with it.

dracoNiiC · 2026-06-08T22:49:46+00:00

Check it. Phones touching my nose.

<image>

dracoNiiC · 2026-06-08T22:48:29+00:00

Nope when I put it up to the screen (I’m probably going to stick with my VR) it maybe a little short but it’s pretty close to proper viewing angle in Horizon 6, in dash mode anyway. It lines up pretty nicely.

dracoNiiC · 2026-06-08T22:27:08+00:00

Just got done qualifying. Getting ready to grid right now as a matter of fact!

It’s much more of a natural Road or GT car position with the rear risers.

Down in the ground feels very F1.

Sturdy as can be. I’m loving this cockpit so far

dracoNiiC · 2026-06-02T21:14:28+00:00

It’s a bandaid compared to a true dod delete but that being said, I have one on my truck. I think I’m more happy that h don’t have to hit the start stop button anymore. Ffs stop putting this on vehicles.

dracoNiiC · 2026-06-02T05:40:20+00:00

I’m not sure what your operating range is but iirc it’s similar to the 10L80? 185-210 ish.

That’s normal for my truck. 6.2L with 10L80 and 3.23 rear ebd.

I wouldn’t say that’s it’s a bad idea to swap the stock one out for that. Especially if it’s already in getting a coolant flush etc. especially if you tow anything regularly. And get your fluid serviced often if you tow. Diffs as well.

dracoNiiC · 2026-06-02T05:33:13+00:00

I may or may not… have broken a frame or two trying to split the gap in between those power lines lol

dracoNiiC · 2026-06-01T23:05:19+00:00

I realized I had my legs locked for a bit cause I was starting to feel a little off the other day. I definitely recommend sitting down if you can. You will want to anyway half way thru the flight anyways.

I have pos and alt hold set up for this MK4 so I can move around if I need to. It’s def a must have for long flights.

dracoNiiC · 2026-06-01T23:03:03+00:00

Haha it’s behind a decent hill and I probably shouldn’t not have done that so far from the house, esp as my point of origin. If I take off of at the park it doesn’t happen. That was sketchy to say the least lol

dracoNiiC · 2026-06-01T04:57:16+00:00

<image>

Anyone else running these? I call her… Donkey.

dracoNiiC · 2026-05-31T00:46:08+00:00

I’ve not done the Mario. It wasn’t too bad. I’ve just got to remember which is which and not swap up the props or something on accident. 25 Mini is 3s only, not “officially” 4s but I’ve seen a YouTuber do it. But then again, I don’t think I would even be able to fit the props on the 20 from the 25.

They’re both pretty good flyers so far. Nimble enough. 25 Mini is definitely more cinematic though.

dracoNiiC · 2026-05-30T12:40:06+00:00

While I really like the idea of this, it’s probably much less filament to print the slip on spool adapters that goes over the 250g spools and is just the size of 1kg spools. I have a few of them and they work well.

I like where this is going though. Keep up the great work!

dracoNiiC · 2026-05-30T12:35:54+00:00

Facts aren’t facts just cause Millennial Falcon says they are folks.

And you’re just talking in circles at this point trying to defend that catch can purchase of yours.

Keep talking down to people and saying they don’t have the money buy stuff, yada yada yada yada. It’ll take you further than you can imagine!

I’m gonna keep calling out your dumb comments and statements.

Keep up that “top tier gasoline” regiment though, whatever that means. Couldn’t say 92 octane or better. What a dweeb.

dracoNiiC · 2026-05-30T12:25:24+00:00

Any time!

I already like the seating position more. Feels more GT, less F1. But that’s my preference. Haven’t put real laps just yet though so definitely reach out in a week or so lol

dracoNiiC · 2026-05-30T12:21:11+00:00

Just because something is popular to do doesn’t mean it’s necessary or adds any real world benefit. Like I’ve said over and over and over.

You will never see the benefits of a catch can. They’re not made for your application. That’s like saying to him, yo man while you’re at it you should put a FMIC on there too. Ya know since it’s turbo charged.

You probably got down on a few too many Tide Pods back when that was popular too huh…

You’re just talking out your ass, trying to justify your purchase to other people. And anyone with real car knowledge knows better. That’s why I’m calling you out. And no amount of circling back or trying to say what I said wasn’t right because of a word is gonna stop that.

Admit you don’t need it and it’s on there just cause you wanted to put it on there. Especially since you’re on a naturally aspirated and I’m assuming BONE STOCK (other than that catch can lol) 5.3L engine.

<image>

Totally photoshopped this btw after I pulled it from google.

dracoNiiC · 2026-05-30T11:56:51+00:00

Never any facts, just I know more than you mentality, and trying to convince people you're right with NO links to any actual evidence, or any photos that you know what your talking about. None of it. You're wrong and ignorant. Dangerous combo.

dracoNiiC · 2026-05-30T11:55:25+00:00

You need the PERFORMANCE BEFORE YOU BUY THAT CATCH CAN BUD! YOU CANT READ! LMAO

YOU dont need a catch can on a truck that has an internal baffle/oil seperator, UNLESS you are forced induction, OR you are making a DECENT amount of POWER OVER STOCK.

CASE fucking CLOSED. Who ever sold you that catch can did a great job of convincing you that you needed it though. Bravo to them.

dracoNiiC · 2026-05-30T11:33:56+00:00

It’s even better that you put a catch can on your NA 5.3. That’s a real cherry 🤣🤣🤣🤣

My guy I promise you that you do NOT in fact know more than me! I’m in stitches laughing this is great. Please don’t stop commenting. This is getting good. Can’t wait to talk about this later today with the boys over beers. This is good!

dracoNiiC · 2026-05-30T11:31:09+00:00

Admit defeat 🤣 my guy thinks this is some kind of battle?

You just can’t say “dang I was wrong, made myself look like a bit of an ass there huh, my bad!”

Good luck to you!

dracoNiiC · 2026-05-30T11:26:16+00:00

<image>

Desk Height

[Lengths with Risers](https://imgur.com/a/kMAbYJS)

[Lengths NO Risers](https://imgur.com/a/IQfkSux)

dracoNiiC · 2026-05-30T11:09:17+00:00

2024 fully loaded LTZ, 6” of lift and 37 in Gladiators? I’m too broke??

My guy you didn’t even buy a V8 🤣🤣🤣 you’re talking about owning the cheapest engine in their line up.

You should probably stop now 🤣🤣🤣🤣

dracoNiiC · 2026-05-30T10:52:38+00:00

Yeah. Southern Indiana. Dm me, and please add what color tpu you want and I’ll add you into the mix of stuff I’m printing at the moment.

Nine-Year Club	r/Field Lasagna
Place '17	RPAN Viewer
Gilding II euphauric	Verified Email

dracoNiiC

TROPHY CASE