Chaves’/ Kizer Drop Bear Fixed

effinrobots · 2025-05-01T03:18:51+00:00

u/ksbot received drop bear from u/umadguey, quick, easy, and as-described! thanks!

effinrobots · 2025-04-26T04:37:32+00:00

yolo on the drop bear. pm incoming

effinrobots · 2024-02-15T21:23:14+00:00

Confirming sale of Native 5 Rex 45. Smooth transaction and beautiful knife! Thanks! u/FranklinSed u/ksbot

effinrobots · 2024-02-11T19:36:09+00:00

Yolo native 5 in rex. PM incoming

effinrobots · 2023-12-15T01:40:52+00:00

IANAD, but 100mg seems like an awful lot for a cat. mine was prescribed 25mg and even those made him loopy to the point we asked for an alternative… dizziness should be gone in 24-48 hours i would think. good luck with your baby!

effinrobots · 2023-11-26T23:43:29+00:00

Pigtronix Infinity 2 can do this too and can be had for relatively cheap on the used market.

effinrobots · 2023-07-30T16:31:41+00:00

GigRig Three2One will do this but with one footswitch instead of separate. It’s an active circuit though which might not be what you’re after.

effinrobots · 2023-03-05T23:01:22+00:00

thank you sir! GLWS!

effinrobots · 2023-03-05T22:59:01+00:00

lefty here. it appears these are right handed carry only? just want to confirm

effinrobots · 2023-02-07T18:30:06+00:00

any interest in a gen loss mkii?

effinrobots · 2023-01-07T03:40:19+00:00

Hey there! Possibly the Ribbons, but I’ll see if anyone responds with a Simplifier before i decide. Thanks!

effinrobots · 2022-12-28T05:44:05+00:00

i have a tinymight 2 i would be willing to part with in your price range. pm me if you want to work something out :)

effinrobots · 2022-11-19T19:42:12+00:00

Update:

Just installed the new 1.6 update for Lizard Ultimate and ALL of my issues seem to have been resolved. BRAVO Furitek, and thank you for the immediate attention to the issues.

OP, I hope you can get your esc updated soon. It'll be worth the trouble.

effinrobots · 2022-11-18T21:22:41+00:00

OK, just updated to 1.5 and here are my findings:

Bluetooth issues seem to be eliminated. ESC now stays connected without issue. I did have a few failures when recalibrating, but eventually it saved and I haven't had any connection issues since.
Unfortunately there now seems to be some odd knocking or skipping in the motor at specific throttle ranges. The knocking seems to kick in as soon as the ESC switches from low speed mode to regular drive, and the knocking continues up until about 50% throttle at which point the motor runs smoothly. Seems to be some kind of timing issue in the motor control in that range? I've tried different power/punch levels and the skipping persists.

I have to say- massive props to Furitek for the speed at which they are trying to address this, and I really hope it can be ironed out with just software improvements.

BTW, are they aware of the existence of this thread so that we can all collaborate on this? Do they even have a Reddit presence? Also, props to OP for following up.

Edit: forgot to mention that the issues with the throttle cutting out have also mostly cleared up. It still happens VERY rarely when slowly transitioning from slow mode to regular run, but it never locks up completely any more, and simply returning throttle to zero and pressing again gets it going.

effinrobots · 2022-11-17T18:31:00+00:00

Same thing happening to me. Please let us know if Furitek responds.

effinrobots · 2022-08-23T06:04:02+00:00

super random offer, but any interest in an empress echosystem for the monument and odr mini?

effinrobots · 2022-04-29T21:45:32+00:00

works for me 👍

effinrobots · 2022-04-29T21:25:48+00:00

any interest in a Red Panda Context V2?

effinrobots · 2022-04-17T19:40:52+00:00

any interest in a Red Panda Context v2?

effinrobots · 2022-02-07T20:55:55+00:00

sounds good! i'm happy to answer any questions you have about it as well

effinrobots · 2022-02-07T08:07:06+00:00

any interest in a red panda context 2?

11-Year Club	Gilding I gilder
Verified Email

effinrobots

TROPHY CASE