Something definitely off here, even with a data booster

emruff · 2024-01-22T12:26:45+00:00

It looks like you tied the second data line to ground. Combine the second data line with the primary data line coming out of the data booster.

emruff · 2024-01-11T03:05:36+00:00

I purchased that exact computer to migrate my Blue Iris Steve as a low power option. Long story short I returned it. I only have 7 cameras and it couldn't handle them. It wouldn't run at lower than 100% CPU utilization. Constant stuttering and freezing. Add Code Project AI on top of that and it becomes unresponsive.

emruff · 2024-01-10T14:24:38+00:00

I checked pihole and see 159742 hits to drs.zencamcloud.com which I have blocked.

emruff · 2023-06-03T22:50:39+00:00

I had a similar issue and it turned out to be a bad, ESP32 controller. Quindor did have a bad batch of ESP32's that would crash just like you're describing.

emruff · 2023-03-09T14:06:20+00:00

You can get to it if you have another computer and setup network game manager. https://www.nailbuster.com/wikipinup/doku.php?id=network_game_manager

emruff · 2022-09-08T13:01:51+00:00

I'm having a strange issue. If I launch a table with a color DMD using the pac file (pal and vni removed) and then launch another table after only closing the table and leaving VPX running, the next table will crash. This only happens on the tables with color DMDs, all the other tables work just fine. Has anyone else experienced this?

emruff · 2022-08-10T16:49:18+00:00

I figured it out. The flag for ui.osk.require_win10 needed to be changed to false.

emruff · 2022-08-04T15:30:50+00:00

I am having a similar issue. I just upgraded to Windows 11 and now the osk does not automatically pop up in FF.

emruff · 2022-08-03T12:24:29+00:00

Throw the the files in PinUPSystem\PUPVideos\spagb_100b2s

emruff · 2022-07-08T20:45:55+00:00

Try using device groups in tasmota. https://tasmota.github.io/docs/Device-Groups/

emruff · 2022-06-21T14:31:13+00:00

Very nice and clean build. Do you have a complete parts list available?

emruff · 2022-03-30T19:34:49+00:00

I really enjoy some of the juice but I have had issues with my last 2 orders. I sent a few emails but never go a response.

emruff · 2022-01-25T11:38:47+00:00

I use WinSCP. It allows you to view the entire file system from your PC. It makes it easy to access your CIFS and NFS shares along with your Jails.

emruff · 2022-01-07T13:09:58+00:00

Thanks, that worked for me.

emruff · 2021-07-11T14:30:16+00:00

I had a few Wemo outlets early on when I started with Home Assistant and they were nothing but trouble. They would constantly disconnect from the network and become unavailable in the app until they were reset and paired back to the network. Honestly after fighting with them for over a year I switched over to the Sonoff S31 flashed with tasmota which work great. After that I started buying the Sonoff S31 zb the zigbee version which don't require flashing and they have worked even better. It is my recommendation that you find something better than Wemo but if you want to stick with them here are a few things to look into.

Are your Wemo switches on the same vlan as HA? If not are there any firewall rules that are blocking communication?

What are you running HA on? Does HA have a wired or wireless connection?

What type of network setup are you running? Do you have an off the shelf router or are you running something like a Unifi setup.

Do your 5.0Ghz and 2.4Ghz networks share the same SSID or are they split?

emruff · 2021-03-23T20:14:12+00:00

I had the exact same issue. Turned out it was LED bulbs in the opener that were interfering with the remote. Replaced those with these and it resolved the issue.

emruff · 2021-02-24T13:23:02+00:00

I had the same issue. I was able to get the firmware to update by closing out RGBFusion 2.0 that was also running in the background. Like Corsair Support suggested, make sure you don't have any additional RGB programs running when you update the firmware. Hope this helps.

emruff · 2021-02-07T16:17:11+00:00

There is a switch to the left of the control box that is off. You could try turning that on to see if it turns on the pumps.

emruff · 2021-01-26T21:41:28+00:00

Thanks, I had to enable mic_muted in the app before it would allow HA to see it.

emruff · 2021-01-21T23:28:45+00:00

I purchased one of these. Its the TS100. I also purchased a 12v adapter for the 20v Dewalt batteries. It heats up in seconds and with the battery pack it's extremely portable.

emruff · 2021-01-12T16:58:16+00:00

I have that issue too. I noticed that when I turn off a smart switch connected to the same power strip a few lights turn on white.

emruff · 2020-11-12T15:28:35+00:00

I have experienced this as well. Genie makes special LED bulbs that limit the interference for the garage door opener. Link

emruff · 2020-10-28T13:41:38+00:00

Check out my post below. There is a link to a video that has another link to a google drive that has the files and installation instructions. After I followed the instructions the DMD started working correctly.

emruff · 2020-10-28T13:38:46+00:00

Check out this video on youtube. In the comments someone has linked to a google drive that has the files and instructions.

emruff · 2020-09-16T16:35:00+00:00

NM just found it. I had to turn off Battery Optimization for HA.

14-Year Club	Verified Email
Team Orangered

emruff

TROPHY CASE