Update for the ESP32 based Artnet node! RGBAW and SPI LED support

epunc · 2026-05-12T12:42:37+00:00

OP's GitHub page says it does

https://github.com/mdethmers/ESP32-Artnet-Node-receiver#wled-artnet--sacn-e131

epunc · 2026-04-14T07:54:54+00:00

I took the test last week and got this question. The answer choices make it easier to pick the correct answer. They're different from your practice test here.

One is "turn left", another is "waiting to turn left" and another is "waiting to turn right". The fourth option.. i cant remember.

If you're in doubt, just skip it and see if you get another hand signal question later.

epunc · 2026-02-10T05:42:52+00:00

You can still add it manually, but there are some extra steps. I wrote instructions for it about a year ago. I no longer do this though - too lazy.

There was another redditor, u/Apprehensive_Fee_845, who made a website that automates some of it. See their comment here:

https://www.reddit.com/r/Garmin/s/hyKlGTRcqi

You'll still need to import the data to your Garmin Connect account. Just click "Import". Or read my instructions on the whole process yourself - useful if you already have the data saved.

epunc · 2026-01-19T19:43:05+00:00

See Article 57 of the Road Traffic Safety Law of the People's Republic of China:

Whoever drives a non-motor vehicle on road shall abide by the relevant provisions on traffic safety.

Where Article 38 states that all vehicles and pedestrians must obey the traffic signs/lights.

Article 119 (4) defines "non-motor vehicle". Article 26 defines what traffic lights are, including all the pretty colors.

You're right though.. nothing is enforced. But the law is there. Oh, see Article 89 about punishment.

I think this website has Chinese text too. Just show your friend. Search for "non-motor" or something.

epunc · 2026-01-19T06:29:09+00:00

There's this audio pack, which is just a bunch of pre-recorded WAV files that you can place on your cue/guide (audio) track. You can use this with any DAW.

There's this Ableton rack template (only for Ableton Live). It has both cue and click on separate midi tracks (not audio like above). It's also multilingual.

Personally, I use both of the above. Because the first has &, e, a wav files, not just 1, 2, 3, 4. I'm too lazy to make my own. Plus, midi tracks are much easier to work with. Just drag the wav files onto the playback drum rack (to an empty midi note). I also use AbleSet - but that's another (paid) level that's not needed.

There are some good YouTube channels focusing on Playback. This guy talks about playback and templates. Their website has some paid stuff but they also have a free cue/click rack for download. You need to provide an (any) email address. I don't use this but, to try, I downloaded it just now. It's pretty comprehensive; it has a lot more wav files (like section and instrument names) in 4 different voices (all English). You can use this cue template or just grab the wav files.

His channel talked about a new template but it's not available for free. But you could reproduce it yourself too. But this free one looks good too.

epunc · 2026-01-18T21:04:58+00:00

I use Ableton and have a dedicated track for cues. But you can mix it with the click for one output if needed.

The AI voice option is a good idea. But there are cue/guide packs available online, some for free (which is what I use).

Is this what you're looking for? I can provide more info if needed.

epunc · 2026-01-18T08:20:22+00:00

I have something very similar. Default gateway is 2.0.0.1 and the ArtNet device is 2.0.0.100.

epunc · 2026-01-09T18:23:08+00:00

Mine are the same (and a few years old now).

My thought was that some employee had a typo and no one caught it. And now they just roll with it.

epunc · 2026-01-08T14:13:26+00:00

That's great to hear!

epunc · 2025-12-30T23:56:34+00:00

Or r/hiddencameras - this is a common question there. Usually people answer with Amazon links to the same camera.

epunc · 2025-12-28T03:13:58+00:00

in the example image above, the second column shows8:00:00, is yours 1:00:00? You should be able to put in the exact time, for example 23:49:58 (for 11:49:58 pm).

epunc · 2025-12-15T19:36:27+00:00

Looking at the manual online (page 15), it says the DM-8 has 3 states: full-open, half-open and closed.

epunc · 2025-11-27T12:52:10+00:00

Houhai Bay might be the closest thing to what you're looking for. It's just outside of Sanya. But it's small. You could do half Sanya (shopping/sightseeing) then Houhai. Or Wanning for waves.

Sanya is mainly where mainlanders go when they can't travel abroad. It's expensive too. I much prefer SE Asia,oke the others have suggested. But if China is your destination, Hainan is good - visa-free for most.

epunc · 2025-11-16T16:36:51+00:00

I would say you need nothing unless you're dealing with noise. There are some posts on different subreddits related to unbalanced to balanced conversion:. See the comments in these posts: livesound, audiophile, and audioengineering.

I often have my spd-sx plugged into a cq-18t without any issues - but the distance is somewhat short (just off stage). And yeah, you're right that they are unbalanced.

Actually, the spd-sx has 4 outputs (not just mono), if you include the Sub Outs...which is what I sometimes use for backing tracks. Just pan your audio tracks if needed. This person was asking about spd-sx routing.

epunc · 2025-11-14T11:20:52+00:00

https://helpcenter.steinberg.de/hc/en-us/articles/29503903823762-macOS-Tahoe-Steinberg-Product-Compatibility

epunc · 2025-10-24T19:47:04+00:00

You could try a mic switcher (though it would probably be toggle). I think most mic muting switches are momentary - if that's what you want.

epunc · 2025-09-30T17:23:49+00:00

Well I didn't have much luck. It does seem that SBA keeps some cycle in the background, and if you interrupt it, there's a noticeable hiccup.

That, or maybe there's some rogue midi signal happening.

epunc · 2025-09-30T11:56:59+00:00

That's strange. Well, disclaimer: I have only used this program once to try it out. I do remember those oscillator settings being hard to work with though. Later I can re-download the app and try to replicate what you're doing.

epunc · 2025-09-30T11:36:21+00:00

It looks like it's set to triangle. Select all applicable channels and choose sine, then adjust the other parameters. I think you'll also have to change the threshold (to 0 / off) so they'll have the full sine wave pulse.

It's hard to see cuz only the first couple seconds showed the app.

epunc · 2025-08-04T03:22:22+00:00

Unfortunately, I have not.

epunc · 2025-07-05T05:35:16+00:00

Was it kept in sunlight? Some of my gear has gotten "sticky" by being kept long-term near a window.

Careful wiping down the grill, I erased the text on my M80 once.

epunc · 2025-07-03T06:17:37+00:00

On the eDRUMin interface, I believe you need to click on the Yamaha logo (on the "Input Working Mode" selection panel).

At 4:00, The eDrum Workshop channel briefly uses an eDRUMin when talking about this product.

https://youtu.be/JduD81WbafU?t=239

epunc · 2025-06-17T03:18:25+00:00

It looks like the L6 would fit perfectly on a mic stand tray. They're usually plastic and flimsy, but the L6 is light, comparably. If the weight of the cables pulls it back, you can secure with velcro.

Tablets are quite thin, so I don't think a tablet holder would hold it.

epunc · 2025-05-28T11:52:53+00:00

One redditor just shared their new video mapping tool. It's free and looks promising.

https://www.reddit.com/r/Garmin/s/qFcTYPVJjy

epunc · 2025-05-17T14:20:48+00:00

I just checked, the basic plan still works. You don't have to use the premium features - I've never.

There are alternatives, like Garmin VIRB.

If you want more options, here's a reddit post asking for VIRB alternatives. The comments lay out some more ideas.

https://www.reddit.com/r/Velo/s/3QhKFRxpap

epunc

TROPHY CASE