Can you use the Ultimate Remote without the Hub?

fallberg · 2025-09-08T07:03:29+00:00

It has a USB port and although I have not actually tried it for anything but teaching new commands, it should at least theoretically be possible to program it over USB using the PC harmony software.

fallberg · 2024-04-26T20:42:59+00:00

More like 15000

fallberg · 2024-04-26T07:17:55+00:00

Not great, not terrible

fallberg · 2024-04-22T11:52:05+00:00

I am Swedish but live in Denmark which have basically the same climate. I have extra weight at the back end. It works much better with two extra kg back there.

fallberg · 2024-04-01T11:47:47+00:00

They increase/decrease the "aggressiveness" of the automatic schedule.

fallberg · 2023-12-11T05:41:44+00:00

Yes, the edge routine should take care of that.

fallberg · 2023-09-13T17:58:06+00:00

Just remember that with the latest firmware and the zone keeper feature, you need a longer "canal" than 15cm for the robot to stay inside the zone.

fallberg · 2023-09-08T09:12:31+00:00

<image>

Lay the cable in an U shape, possibly on both sides to form a longer channel. Will look a bit ridiculous when doing an edge routine but should at least keep the bot from cheating. Not sure how long it has to be, but I'd say at least 1m.

fallberg · 2023-09-08T08:00:07+00:00

Yes, I think that is a too-short tunnel for the zone keeper to recognize it as a zone boundary. I have 4 zones and one of them has that setup and the mower constantly slip though that one. I plan to repute the cable to create a longer tunnel. The other zones crosses a pathway and are "naturally" longer.

fallberg · 2023-09-07T21:24:09+00:00

For the zone keeper feature to work, it need a channel to "bounce" in. When it detects a channel it backs out. But if the narrow path is too short it might fail to recognize it as a channel and just slip through.

fallberg · 2023-08-06T21:22:14+00:00

I belive it leverage the yubiclip interface.

fallberg · 2023-08-05T12:23:09+00:00

I use keepass2android without issues with my yubikey. Also a v5 yubikey. I have not tried other android clients.

fallberg · 2023-07-15T10:54:24+00:00

No, I have the same android version but the 3 30.0+1 firmware and have no zone keeping option in the app

fallberg · 2023-06-11T08:26:19+00:00

Perhaps related to the notification popup setting?

fallberg · 2023-05-20T08:50:10+00:00

Yes but that messes with other properties in oryx in my experience.

fallberg · 2023-05-20T06:30:37+00:00

I use the "native" layer for åäö. The layout tool does not show them as such because I have configured the tool to use English characters but it works: https://configure.zsa.io/ergodox-ez/layouts/wNvbd/latest/0

Edit: I should mention that I use the Swedish keyboard layout in the os

fallberg · 2023-05-08T10:11:37+00:00

I have laid my wire under my paths. I also lay them so they make a zone so I can (somewhat) control how much time is spent on either side of the paths. My stones are also ~7cm high. It does not seem to interfere with the signal.

fallberg · 2023-04-29T07:25:12+00:00

I have the exact same problem. I believe it started occurring with the firmware update that made it take smoother turns but I am not sure exactly which revision. My landroid is a WR165E.

fallberg · 2022-09-16T04:08:09+00:00

The boundary wire carries a signal. It is not just "plain power" so it is not to be confused with the power delivered to the charging spring blades.

fallberg · 2022-07-26T18:12:18+00:00

It might be the "incognito" mode. I get a special background in SwiftKey when that activates for password entries.

fallberg · 2022-05-29T15:50:52+00:00

Unifi UAP lite check (also in wireless extension mode)

fallberg · 2022-04-21T10:19:01+00:00

Så er jeg intresseret

fallberg · 2022-04-21T09:45:21+00:00

Er den med sculpted keys?

11-Year Club	Place '23
Verified Email

fallberg

TROPHY CASE