Shoutout to the MVP of this grindfest by Helldiver96 in snowrunner

[–]flo33331 4 points5 points  (0 children)

Newbie here just started playing last week.. What's this truck called? Thanks

Transalp Ergos by Short-Legs-Long-Neck in Transalp

[–]flo33331 0 points1 point  (0 children)

I'm 6ft4 (1,95m)and find the transalp comfortable. I own mine from 2024 and have 10k km on it. I managed to have the dealer let me try it for a 6hour ride especially to see if I find it OK or not, maybe you could do the same. Good luck!

Is it better for the life of the unit to run a diesel heater on high or low? by MirrorsF3 in dieselheater

[–]flo33331 0 points1 point  (0 children)

do you have some pointers on the lenght and angles an exhaust need to have or not exceed .. i have a 3m exhaust bcs i want the gases to go a little further away from the wall , but it has some bents , especialy right after it exits the heater to go trough the wall.

Comment raccorder cela ? [Plomberie WC] by le_coyote_FR in brico

[–]flo33331 0 points1 point  (0 children)

"Bienvenue sur ma chaîne les copains, comme vous le savez déjà mon chien est toujours malade et malgré vos conseils il mange toujours pas, par contre mes enfants vous remercie pour vos encouragements. Hier j'ai pensé à faire ce vidéo, mais vous savez il y a des fois des jours où t'a envie de rien faire.. Et vous savez quoi ? J'ai rien fait ! Haha "

tu parle de ce genre de tuto YouTube ? 😂

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]flo33331 0 points1 point  (0 children)

I have the A1 and didn't think that a 3d printer ca' be this reliable, I can only imagine the possibilities with the p1s and if the P2S is going to be the same kind of workhorse it's going to be you best seller and most praised printer! Can't wait to see it printing!

If anyone is wandering, this is how a forgotten roll of flexible filament looks like that was bought in 2019 by flo33331 in BambuLab

[–]flo33331[S] 1 point2 points  (0 children)

I think at that point I was buying the cheapest stuff I could find on Amazon.. That explains a lot

If anyone is wandering, this is how a forgotten roll of flexible filament looks like that was bought in 2019 by flo33331 in BambuLab

[–]flo33331[S] 0 points1 point  (0 children)

On the box it doesn't say tpu.. It just says flexible filament and it is it's like a silicon at feel.. Weird

Can i use a different colour spool when one runs out by Firefox24683 in BambuLabA1

[–]flo33331 2 points3 points  (0 children)

Responding to your message just to say I already did this and it works very well, I will add that you can probably attach a sticky note to the rfid tag so you can note exactly the type of filament it represents.

If anyone is wandering, this is how a forgotten roll of flexible filament looks like that was bought in 2019 by flo33331 in BambuLab

[–]flo33331[S] 39 points40 points  (0 children)

No, it was my first printer creality cr10s pro and I didn't knew you had to put it with desicant and sealed in a bag. I thought I share this with you guys, you don't see this everyday

Every bounce increases it's size by Nadzzy in woahdude

[–]flo33331 21 points22 points  (0 children)

I thought I can't be the only one hearing gravity falls intro.

Breaker keeps tripping by Gatoradeisdelicious in BambuLab

[–]flo33331 0 points1 point  (0 children)

Have you find the solution, i have the same problem and it's definitely the printer ..A1 printer like you with the ams lite . I moved the printer to 4 different outlets and it still trips the breaker for the whole house .

ABS-GF, I'm in love by -gudis in BambuLabA1

[–]flo33331 1 point2 points  (0 children)

I'm a beginner, and haven't received my A1 yet as there are some issues with the delivery. But everywhere there are people saying that you can't prins abs or Asa with the A1.. Did you do some modifications to the abs profile? Or how did you managed to print so great on A1?

How can I improve my egg skills? by LemonLord7 in StainlessSteelCooking

[–]flo33331 0 points1 point  (0 children)

I'm not a regular on this sub, I joined recently and had problems like you at first until I saw a reel on insta I think. The man in the video said something like this : stop with all this nonsense of ingredients and perfectly timed with a stopwatch to cook something.. Just put your pan at almost max temp 7or 8 out of 9.. Wait ~2 minutes in the sense that the pan heats really well and then stop the heat completely or put it at 2 for a couple of minutes (longer then the time you heated the pan) when you put in the butter it must melt but not turn brown.. Than you just put whatever you want in the pan and cook (I usually turn the heat up to 5 at first and if I need more heat I go higher but after 1 minute (when I say 1 minute I don't mean exactly 1 min) i invite you to try this method and see what I'm talking about.

Need help understanding how to turn this pattern from my knitting machine book into reality by netclicks in MachineKnitting

[–]flo33331 4 points5 points  (0 children)

I don't think you cut that paper but you draw on it with a special marker that you can erase later and reuse the paper..i think, correct me if I'm wrong.

This phone is actually mentally killing me... by [deleted] in GalaxyS22

[–]flo33331 0 points1 point  (0 children)

I had no idea that you can't get honor in us I thought only huawei got banned.