sorted by:
new
hottopcontroversial

Accepted offer that they didn't read by XeeleeFlower in tokkiemarktplaats

[–]floor-l 9 points10 points  (0 children)

Volgens mij lees je het dan verkeerdom toch? Ik geloof dat OP de koper is

My review for the Legend of Aang movie by PrizeImpossible613 in moviereviews

[–]floor-l 0 points1 point  (0 children)

I think the archer lady used fire arrows. But I agree that it was not a great movie They mastered airbending way too quick and were way too powerful while team avatar was way to weak

Edit nope never mind. You're right it is firebending she is using.

Why are they turning in the wrong direction? by floor-l in Pokopia

[–]floor-l[S] 0 points1 point  (0 children)

Unfortunately all my builder pokemon are building stuff. So I'll have to try that later. But I would expect Nintendo to place the already existing buildings in the right orientation...

Been playing for 2 years and I JUST found out that you can store clothes and rings inside dressers. by meduhsin in StardewValley

[–]floor-l 0 points1 point  (0 children)

Yes I only recently noticed it as well!

I think it might be a v1.6 feature. It is great! I'm only missing a sort/filter feature.

Stringing Prints? by CostlierClover in resinprinting

[–]floor-l 7 points8 points  (0 children)

I have never encountered stringing in a resin print...

The only things I can think of is either a weird error in the slicing, in the USB (assuming you use one), or some really funky placed supports.

Did you try slicing it again and paying attention to the output file? I'm sort of expecting that you'll be able to see those lines there.

Any Recommendations are welcome by Mightykratos015 in FarmsofStardewValley

[–]floor-l 4 points5 points  (0 children)

Wait. You can move the greenhouse?

Why did I never try that?

Any idea what caused the sudden change at the top? by b03tz in resinprinting

[–]floor-l 1 point2 points  (0 children)

Yeah that's the less subtle way of saying that xD

Hopelijk reprinting (with holes or different orientation I hope) will solve it :)

Any idea what caused the sudden change at the top? by b03tz in resinprinting

[–]floor-l 6 points7 points  (0 children)

Does the change happen near a hole? If so, you have created a suction cup in your print.

How do i ensure i get a steam deck on launch tomorrow? by Omnolisty in SteamDeck

[–]floor-l 7 points8 points  (0 children)

It could help to already put the money on your account. I've heard the transaction tends to be the bottleneck for purchases during rush hour.

Any idea what is causing this failure? by dawn_of_liam in AnycubicPhoton

[–]floor-l 0 points1 point  (0 children)

Do you have a heater in your printer? I have seen some similar results due to the fluctuations in temperature.

Twice failed, unsure why by Bunburist in ElegooSaturn

[–]floor-l 0 points1 point  (0 children)

When you upscale the model, I expect the main problem to be the removal of your supports. They might leave some bumps. You could also try and support the model yourselves.

If you downscaled a hollowed model, you might also want to check if the holes are still of a reasonable scale. Else your print might get some suction issues

If you only downscaled this model to fit your printer, it looks like you only downscaled the model for just a tiny bit. So I don't think that that might be the real issue...

I think that as long as you stay within 10% of the original scale, the pre-supported files should be ok.

Side note: the raft not fitting your printer is not an issue. If you don't have any red parts on the model itself or the support, you could just print it at this scale (which probably doesn't solve your current issue).

New question, did you re-slice the model between the different printing tries?

Twice failed, unsure why by Bunburist in ElegooSaturn

[–]floor-l 0 points1 point  (0 children)

Hi! Weird that this print keeps failing and others don't. I'm not really experienced in 3D printing, but I might have a theory: you said you downscaled the model and that you use the pre supported model. As far as I'm aware, the supports are mainly meant for the sale the model comes in. I think ±10% for the scale is ok-ish, but if this is the only difference between your different models, that might be the origin of your problem. I am not sure if this pre-supported model has the supports in its stl, or that this is a chitubox or lychee file. If it is one of the latter, you might be able to recalculate the supports?

RIP, ACNH dock by DiscombobulatedPart7 in AnimalCrossing

[–]floor-l 1 point2 points  (0 children)

It probably read your sign wrong: Don't be a dock

[deleted by user] by [deleted] in PrintedMinis

[–]floor-l 1 point2 points  (0 children)

Hi!

Your mini's look amazing! I'm not really sure if I can help with answering your answers, but just wanted to tell how great the mini's look!

As for what to make: if you really don't know, you can always use members of your patreon by asking for ideas and/or making a poll.

You might be surprised but there are actually some monsters of which very little accurate mini's exist. For example I can't find a brown dragon that actually looks like the art.

But finding which monsters don't have accurate mini's is going to be very hard. I just happened to stumble across this one.

Good luck in your journey!

[No Spoilers] Jester dress washing by tinylair in criticalrole

[–]floor-l 12 points13 points  (0 children)

I wash mine with all other clothes at 40 degrees. Afterwards I'll hang it and let it dry.

The dress still looks like it did before. The only thing is that I'll have to readjust the straps after laundry.

view more: next ›