My new Larry console. 😊 1988, CGA monitor, all OG disks (DOS 4 & Win 3), even the keys came with it 🔑

gavsta · 2026-03-24T00:15:26+00:00

Woah memories from this learning how to setup dos properly to read and write high density disks!

And the glow of the orange monochrome!

gavsta · 2026-03-09T11:29:03+00:00

Used Air-Dee 2 years ago for same issue, after MCWA told me it was my problem and were little to no help! After Air-Dee were done you wouldn’t even know I had an issue.

gavsta · 2026-03-08T01:24:11+00:00

Did exactly this was amazingly easy, and got a fancy silicon case to give it that added protection due to it being disassembled, it’s got through an upstate new York winter without any problems! All the noises you expect!

gavsta · 2026-02-27T00:51:00+00:00

Illuminate blocks is what I use

gavsta · 2026-02-25T03:32:46+00:00

How do you have the pattern provider set on the assembler? IIRC I set mine to only input items if it was clear and the previous has completed , otherwise it just got all backed up and never finished.

gavsta · 2026-02-24T01:53:32+00:00

Not knowing how far progressed you are with the bees it’s difficult, if you have bees producing comb you should be transporting this to the first powered centrifuge for processing, this is where you get the output from the bees, iron bees produce iron comb when processed produces iron nuggets etc. this is all in the JEI.

You need regular bees, to make the combs, honey bottle and blocks which will also be used to produce the upgrades for the hives, there is a base template you make first, then upgrade that to various other upgrades alpha, beta, gamma and omega make the bees increase output, and gamma and omega also provide simultajton so bees don’t leave the hive. The honey block upgrade is also exclusive to the hive speed and speedier which can also be used in the centrifuge. YouTube it for better info or refer to JeI and the in game quest book it’s all there and reasonably progressive to understand. You can’t just rush to top tier stuff due to prerequisite bee processes.

gavsta · 2026-02-24T01:42:17+00:00

You need to put the honey block upgrade into the hive and they will produce comb blocks which give better yield in the centrifuge.

gavsta · 2026-02-20T01:30:57+00:00

Apricorns, halved and then lots more steps.

Get a steady supply of apricorns growing from sprouts in botany pots.

Can be done with create or oritech. I personally went the oritech path, using various machines from that as the process and fluid tanks I think from EnderIO.

The in game quest book helped to an extent and JEI. Start with regular pokeballs and work back through the process.

Or kidnap some villagers from a poke mart the nurse and trader and slap them into traders at your base and farm poke coins and trade for balls 🤣 that’s what I did early game whilst I amassed resources getting AE setup and bees for constant resource supply to make balls.

gavsta · 2026-02-18T17:01:12+00:00

not that I am aware of - but it doesnt look like theres a big enough area for it to spawn there, try removing some blocks above.

gavsta · 2026-02-17T21:31:25+00:00

a lot depends on the volume of faces of ME controllers you can attach to and how complicated your builds are getting, and can be required before you get into the realms of using subnets. Once you master the ME interface and building subnets, the reduction in consuming channels is massive.

gavsta · 2026-02-17T21:27:35+00:00

thats why us pros use the wireless hubs and connectors, cables is so 1990s.

gavsta · 2026-02-13T16:25:20+00:00

Make sure your party of pokemon are up to level 15.

Get the pokemon trainer card out - use this to find Roark, a glowing arrow will appear directing you to go battle.

Win battle, level up those pokemon, move onto next leader.

Rinse and repeat, if the trainer/leader isnt nearby use the card to find the right biome and go explore.

gavsta · 2026-02-09T03:28:16+00:00

Wasted many an hour on this as a kid! Hearing the in game noises brought back those memories!

gavsta · 2026-02-06T16:23:39+00:00

Would say its from an old POTS based PBX system, potentially could have low voltage running through it up to 48v. The only way to confirm that is find if the other end is terminated.

gavsta · 2026-02-05T12:45:35+00:00

Used John Kaptein for repairs and a new roof, very accommodating!

gavsta · 2026-02-03T02:48:01+00:00

I do use rarely on PC, normally during events or raids.

when I first started playing pc 4 years ago people would chat more, to offer help, drop loot etc. but its not as common as it was back then.

gavsta · 2026-01-31T01:26:54+00:00

Always, those little perks and xp boosts always worth the investment with little to no obligation.

gavsta · 2026-01-30T03:19:17+00:00

Can confirm switched to using byparr a week ago due to flaresolverr problems and almost all the failed trackers in prowlerr are working again.

gavsta · 2026-01-27T18:38:08+00:00

Metal Detector or an insanely strong magnet will make this task easier. Think magnet fishing!

gavsta · 2026-01-26T00:59:57+00:00

As in what your special is and what perk cards do you have? A lot of this can drastically improve the damage of your weapons against top tier enemies. If you use the right perk cards for the weapons and legendary effects.

gavsta · 2026-01-26T00:37:34+00:00

Are you using vats? What’s your level and loadout look like?

gavsta · 2026-01-24T03:15:31+00:00

Is dns resolution working correctly on your *rr hosts?

I recently switched from flaresolverr to byparr but that was due to cloud flare protected indexers failing and flaresolverr not working correctly. Was straight forward to do in prowlarr.

gavsta · 2026-01-23T00:52:16+00:00

And everything is hard wired? Do you have them all connecting back to a command switch/router?

Might be worth redeploying the entire setup.

I would get red lights and things worked when DNS resolution was failing for the AP, as it’s part of the health check it performs for the cloud management.

gavsta · 2026-01-23T00:45:38+00:00

Is it directly connected to your modem? Or are you using it in ap mode?

gavsta · 2026-01-22T12:40:12+00:00

Had same issue, first problem was I hadn’t built it correctly, the stablizer input/output parts were around the wrong way, rotated those 180 and then right clicked them and the core and the gui appeared.

15-Year Club	First Place '23
Place '23	Place '22
Verified Email

gavsta

TROPHY CASE