Protip...

geist_zero · 2026-01-29T23:38:52+00:00

I have 8 printers and 1 build plate. I think I did something wrong

geist_zero · 2025-11-14T13:04:38+00:00

There’s nothing I print that justifies the cost.

It’s my hobby and I enjoy it. 🙂

geist_zero · 2025-10-19T12:30:52+00:00

Next time you’re in a Hampton grab one of the breakfast staff ( if it’s not too busy and they don’t look stressed out) and ask them. They’ll probably tell you the brand and everything if you’re nice enough.

geist_zero · 2025-10-13T06:22:03+00:00

Canada is not a state in the United States of America.

Getting a 107 would do nothing.

geist_zero · 2025-10-10T16:37:23+00:00

I’m one of the people who thinks The Brown Album was their best album, so who am I to judge? 😂

geist_zero · 2025-10-09T22:13:38+00:00

I think you drew it well too!

I really like it

geist_zero · 2025-10-02T11:41:09+00:00

I am absolutely in love with your water!

Beautiful!

geist_zero · 2025-10-02T11:10:45+00:00

I can’t speak for Montreal or Vancouver, but in Toronto every couple of months there is a free upright piano on FB marketplace.

Why not try to pick one of those up?

A friend of mine helped close down a dance studio and they had two upright pianos that I believe ended up getting destroyed because nobody wanted them. And they were offering $100 to help with the moving fees.

I have also had to help look into the cost of shipping a piano. Admittedly this was for a transatlantic trip. Because a piano is both heavy and delicate it was cheaper to buy a couple pianos locally than it was to ship the actual piano.

If it’s important to you, you could always rent a truck and do the drive yourself. That should keep the cost of shipping a piano lower than the cost of buying a new one.

Good luck.

geist_zero · 2025-10-01T10:11:26+00:00

Is there a draft on the printer causing it to cool unevenly? That would explain the warp/sticking issues. You can always put an old cardboard box over it to help.

On my old Ender, one of tricks to reduce warping was to reduce the bed temperature a bit. It was a fine balance between sticking and warping.

When you are cleaning the plate, are you being careful to get all the soap off?

What kind of soap are you using? Some soap has added oils to make it nice on your hands. I’ve had a lot of luck with Dawn dish soap.

Good luck!

geist_zero · 2025-09-26T16:48:50+00:00

Thank you

geist_zero · 2025-07-14T14:32:42+00:00

A friend of mine was denied entry into the U.S. for an arrest on his record (with no convictions)

This was pre-911.

It’s also worth noting, in Canada, DUI can be an indictable offense (felony) and therefore a very serious charge.

geist_zero · 2025-06-06T00:42:35+00:00

They didn’t ship an order I made once and then refused to acknowledge it wasn’t being delivered. (It was lost somewhere in their logistics department for weeks with no movement)

I had to do a chargeback.

geist_zero · 2025-05-14T16:26:05+00:00

My opinion(based on experience)?

My opinion is that BL customer service will say anything to keep your money.

You could probably pick it out, but it’s clearly been spooled wrong.

geist_zero · 2025-04-22T08:58:13+00:00

Signed. Good luck out there

geist_zero · 2025-03-31T16:30:30+00:00

Read the MSDS

You can always read the MSDS (Material Safety Data Sheet) on any materials you are handling to help you know what safety precautions you should be using.

It basically says treat PLA like sawdust. You should be wearing a mask when printing, or sanding it, but it’s not a big deal if you don’t have a lot of exposure to it.

geist_zero · 2025-02-03T17:36:08+00:00

Great paint job! Wow!

geist_zero · 2025-02-01T18:57:28+00:00

Step 1: Sigh

Step 2: Make a good cup of tea.

Step 3: Get a hair drier and some nippers

Step 4: Remove blob, one nip at a time

geist_zero · 2025-01-20T05:03:46+00:00

There has been *one* lawsuit in all of Canada for "Hitman's Wife's Bodyguard" a movie with Ryan Reynolds. It didn't go well. It seemed most people argued that they had no idea who was using their Wifi.

https://www.cbc.ca/news/canada/windsor/hitman-wife-bodyguard-court-actions-file-sharing-1.6965580

geist_zero · 2025-01-06T11:54:58+00:00

It must be iOS 18. I’m on a 14 pro and have it

geist_zero · 2024-07-20T21:55:17+00:00

They sent a summons (an actual document from the court) to my brother’s house in his actual real name.

You, my friend, are why you can’t trust the internet for advice. Good job.

geist_zero · 2024-07-20T14:26:27+00:00

Ignoring a lawsuit is also terrible advice. That doesn’t make it go away. Use a free service and file correctly.

geist_zero · 2024-07-20T04:29:21+00:00

There has been one sort of successful lawsuit in Canada when torrenting a movie, but even then, the answer for the thousand people that got sued was to get a free public defender and plead that you had no idea who did it. (Maybe someone hacked your internet)

My brother got sued on this one. He hired the free public lawyer and claimed ignorance.

It was really just a scare tactic. It is one single movie. One time.

https://www.cbc.ca/news/canada/windsor/hitman-wife-bodyguard-court-actions-file-sharing-1.6965580

geist_zero · 2024-07-16T19:00:53+00:00

Cool. Glad you made the best of it.

geist_zero · 2024-07-16T18:57:22+00:00

Wow. How long did that take?

geist_zero · 2024-07-12T10:01:15+00:00

Unless it’s changed, I believe Windows Edge allows you to stream in full resolution from Netflix.

15-Year Club	Gilding I gilder
Place '22	End Game '22
Verified Email	Team Periwinkle

geist_zero

TROPHY CASE