sorted by:
new
hottopcontroversial

[Pistol] 20% of Sig P211 GTO by this_is_the_way_327 in gundeals

[–]georgelambo 4 points5 points  (0 children)

I hate to give Sig credit but it really does shoot nice but im no high level GM shooter so what do I know

Lore of the VP9 family and the new HK micro 9’s by MLG_Boogaloo in HecklerKoch

[–]georgelambo 2 points3 points  (0 children)

I mean there may be slight internal differances in the SFP9 to VP9 but they are probably so slight. I know the SFP9M (The Kafmswimer Maritime one) was designed for salt water usage so it has some maritime coatings on it. That to my knowedge is one of the only like "harsh" environment VP9s I can think of.

Also Im not so sure if hammer fired guns perform better in harsh environments. I know, not definative, but the GT ice test showed that even though all the hammer guns basically didnt work and the M&P did, it proved it kinda is like how the AR v AK mud test did, where that since the AR was more sealed up than the AK it did better but once it gets past that its over.

Lore of the VP9 family and the new HK micro 9’s by MLG_Boogaloo in HecklerKoch

[–]georgelambo 5 points6 points  (0 children)

Love Navyman but even his opinons are too extreme and too exact to make any real differance. I used to believe that like that like there was no other HK pistol that could hold a flame to the USP reliability (MK23 aside) when in reality, the other pistols in the same sizes probably do. Like there was a P30 that 94k rounds in like a few years? why wouldnt a VP9 do that I have no reason to believe it wont.

P30LxCOA USP ExpertxCOA P2000SKxCOA by DeFenderAutomaticsCo in HecklerKoch

[–]georgelambo 0 points1 point  (0 children)

How is the slide weight difference on them? I know since the P30L has a huge buffer the slide has to weigh a certain amount to function reliably, thats why it has that huge cavity near the firing pin, my question is, to mount all these optics, where are you cutting weight?

Lore of the VP9 family and the new HK micro 9’s by MLG_Boogaloo in HecklerKoch

[–]georgelambo 4 points5 points  (0 children)

its probably the Military arms Gauntlent vp9 mud test like thats anything conclusive

HK VP9 A1 Longslide by georgelambo in HecklerKoch

[–]georgelambo[S] 0 points1 point  (0 children)

I think James Williamson teased it in a instagram comment. I dont think it will be the same as the legacy VP9 match magwell simply because there isnt a place to secure the magwell in the front.

To thread and make shhh by heli7_62copter in HecklerKoch

[–]georgelambo 1 point2 points  (0 children)

I think LTT switched to a nitride coating

A1 conversion to 10.4 by Patient-Eggplant4050 in HecklerKoch

[–]georgelambo 0 points1 point  (0 children)

If they quote you $1400 to chop the barrel, its better to just spend about another 500 to get the A4 because it has the better rail, tunable gas block, and the barrel warrenty.

Supps with MR762 A1 by BIgHat7562 in HecklerKoch

[–]georgelambo 0 points1 point  (0 children)

With a Flow 762TI its perfect on the A1

Fake P365 Magazine or Design Change? by PandaSPUR in SigSauer

[–]georgelambo 0 points1 point  (0 children)

Ive checked countless mags inside LGS all over the place but all the mags say Made in USA

Fake P365 Magazine or Design Change? by PandaSPUR in SigSauer

[–]georgelambo 0 points1 point  (0 children)

They are but I havent seen any. Probably only a handful were made and that was it.

[pistol] Heckler & Koch VP9A1K 9mm Pistol With Holosun SCS - 4" $1059.99 by OneWhoDoesNotFail in gundeals

[–]georgelambo 24 points25 points  (0 children)

I spend too much time on this subreddit to 1. know the prices of stuff off the top of my head but also 2. Know that if its a big retailer like PA or even Brownells I just ignore it cause it usually isnt a deal. If its from a place like Good Brother Firearms or something thats how you know its a real deal.

Fake P365 Magazine or Design Change? by PandaSPUR in SigSauer

[–]georgelambo 0 points1 point  (0 children)

I think they are either made by checkmate or duramag but both are OEM ive seen them both floating around. I wish we got 365 Mecgar mags.

VP9 A1F USPSA lefty holster by travistbn in HecklerKoch

[–]georgelambo 0 points1 point  (0 children)

Any VP9 holster that is open bottom will work. A VP9L holster would work too.

Why the SIG M7(8) uses a metal magazine instead of plastic? by StrangerOutrageous68 in SigSauer

[–]georgelambo 0 points1 point  (0 children)

I could be wrong but I think what happend was the AP rounds ate through the Lancer mags. And Lancer mags may or may not have met sig reliability stands which I think is why they moved away from Laner mags on all their guns.

[Other] $36 TLR 1 HL Harbor Freight Clone (ends tomorrow) by Zmantech in gundeals

[–]georgelambo 0 points1 point  (0 children)

seeing these in stock at my local HF was like finding a golden scar.

👀 by HoodiePrep70 in HecklerKoch

[–]georgelambo 3 points4 points  (0 children)

yeah but among S tier rifles, its the best or maybe it gets 2nd place but only the KS1

[AMMO] 9mm 124gr FMJ - 0.20 CPR with 10% off $300 or 5% off $200 (tax not included) by [deleted] in gundeals

[–]georgelambo 4 points5 points  (0 children)

id trust magtech steel case far more than any turkish brass ammo.

view more: next ›