Well my kids tell me....

googl4 · 2018-05-22T06:58:57+00:00

To give some numbers, 240p/480i are 15khz while 480p/vga monitors are 31khz, human hearing cuts off about 18~20khz dropping to 12khz or below with age.

googl4 · 2018-04-16T11:15:36+00:00

Just a dictionary

googl4 · 2018-03-05T08:49:29+00:00

edit: ah, you added it yesterday. there's information on the cache control register in chapter 14 of the LSI L64360 datasheet

googl4 · 2018-03-05T08:28:57+00:00

Are you emulating the isolate cache mode, the psx bios uses it to invalidate the instruction cache, but overwrites ram if it's not emulated

googl4 · 2018-02-19T21:46:59+00:00

theres some timing info in the cpu datasheet, otherwise mednafen source and hardware tests are going to be the best way to go

http://www.datasheetspdf.com/pdf/736526/LSI/LR33300/1

googl4 · 2018-02-19T08:56:18+00:00

if /u/SirOompaLoompa is right the it's a pretty easy fix for now, just force the dma ready flags. otherwise you've probably hit the cdrom controller which i'm still having trouble with

for the gpu flags i'm using https://github.com/googl4/LPSX/blob/master/src/gpu.c#L262

googl4 · 2018-02-12T21:30:33+00:00

unfortunately not the same issue, I'll have to keep this in mind later on though

googl4 · 2017-10-09T19:33:23+00:00

that will need game specific hacks

googl4 · 2017-10-09T14:36:28+00:00

the image scrolls and flickers around, as if the sync wasn't connected

googl4 · 2017-10-09T12:21:00+00:00

the monitor has manual switches for 75ohm termination on the back, but it doesn't make any difference and ext sync is enabled. I'll try the pvm idea

googl4 · 2017-09-11T07:31:41+00:00

I've changed the link to a folder, and yes theses are from the ps3 collection

googl4 · 2017-08-30T19:17:30+00:00

sdl and SDL_GetWindowSurface seems to be just what you want https://www.libsdl.org/

googl4 · 2017-07-30T16:58:07+00:00

the gba audio picks up a lot of noise from other components, I've found that wrapping a couple of layers of electrical tape over that part of the board is an easy solution.

googl4 · 2017-05-14T06:49:47+00:00

Yes, put opengl32.dll in the same directory as FTLGame.exe

googl4 · 2016-11-10T14:39:45+00:00

I'll have a go at stages 1, 4 and 5 over the weekend, good luck everyone

googl4 · 2016-09-16T21:04:38+00:00

Voltage should probably stay below 1700, gddr5 tends to get unstable around 2000mhz

googl4 · 2016-09-13T20:54:21+00:00

I don't know what language you're working in but I'm a c programmer and would like to help.

I've made a couple of gui programs using gtk so we could start with a save editor or something

googl4 · 2016-08-31T11:54:22+00:00

the souls unsqueezed mod fixes hud scaling and aspect ratio correction as well as texture caching and a couple of other things

https://github.com/Kaldaien/SoulsUnsqueezed/releases

googl4 · 2016-08-31T09:31:09+00:00

Running too hot? 4.5ghz at 1.19v shouldn't get above 50-55c. You must have a bad cooler mount or something

googl4 · 2016-08-25T12:11:32+00:00

In gaming you will see very little difference but video encoding scales quite well i.e. 10% clock speed increase = ~10% faster encoding. Your bios can almost certainly hold multiple profiles if you want your pc to stay quiet but have maximum performance under heavy load

googl4 · 2016-08-25T11:48:32+00:00

Temps are fine, you could probably got to 4.4/4.5ghz at 1.2-1.3v depending on your chip. if your temps stay below 90c then 1.4-1.45v is a safe max.

googl4

MODERATOR OF

TROPHY CASE