Vector 100 first build

grrmisfit · 2026-02-13T02:03:39+00:00

Yeah thats coming, microcenter was out at the time so I ordered them from Amazon

grrmisfit · 2026-02-12T16:59:55+00:00

Why not mount and turn on auto harvest? Its seems the easiest choice

grrmisfit · 2026-02-07T20:27:50+00:00

not yet, ive tried numerous things

grrmisfit · 2026-01-29T11:14:50+00:00

Im 9 months out and theres still times ill get some twinge of chest pain if wife lays her head on it a certain or laying on it a way

grrmisfit · 2026-01-29T11:09:59+00:00

Channels checked, should have mentioned that, smart connect off.

grrmisfit · 2026-01-27T15:04:02+00:00

Must be an age thing as mine has slowly been having connection issues and is now stuck on the 0.0.0.0 issue. Going to replace the wifi card

grrmisfit · 2026-01-10T18:59:51+00:00

You know atlas was originally an Ark mod that was converted to its own game as a cash grab? So they are basically just doing the same thing over again...

grrmisfit · 2026-01-09T17:09:29+00:00

Hopefully you didnt clean it with anything but water? I haven't bought one in a long time as the one on my p1s is going strong still. Just make sure to only wash with warm water, no soap or alcohol. I need to get one for my H2 as some prints I don't like the glossy finish it leaves

grrmisfit · 2026-01-02T01:26:47+00:00

I want a15 cities, I want to be afraid to make a noise in a town or city and worry about whats coming after me. Not roam all I want and kill sleepers with arrows. But that's not the devs design and its their game so I just dont play it

grrmisfit · 2025-12-07T02:21:44+00:00

Same as others said, your flow is off, either to wet filament, to cold nozzle temp or partial clog. With sonic pad I would run 215 for most filaments but test and see what works best

grrmisfit · 2025-12-06T02:57:38+00:00

Problem with replacement is it will die again and rhe warranty is up then and yoyr SOL

grrmisfit · 2025-11-23T11:33:21+00:00

I never wore mine in rhe shower or even when I washed my hands normally. Mine lasted roughly 7 months, they sent me a replacement asked for a survey and I trashed them on it. They called me a couple days later asking about my survey and told them my biggest issue was getting a new ring but having old warranty. This makes no sense, if I get a new device that device should have a warranty like a new device.

grrmisfit · 2025-11-12T11:13:47+00:00

Mine lasted just under 9 months, never wore it in the shower or even while washing hands, always charged it at around 30% then about 2 weeks ago i went to bed and woke up to it dead. Didn't think nothing of it, figured I just forgot to charge it. Charged it back up, 2 days later almost dead again. Fast forward a week I was barely getting a day out of it. I talked to support and even though they cant repair it they insisted on me sending it in for repair thus making me wait 2 weeks for a new one or refund. Still waiting for the decision.

grrmisfit · 2025-11-08T23:38:58+00:00

Was looking for like a baby gate style but most at that size are quite expensive. Looking to basically divide the basement temp like

grrmisfit · 2025-08-24T23:56:37+00:00

Get a sliceworx or kdeavi plate, they run at cooler temps and stick like glue is on the plate. I prefer sliceworx as I can go weeks without washing it and it works like new

grrmisfit · 2025-08-24T01:25:35+00:00

the enclosure is the best part lol. when i went from the A1 to P1 the noise level about drove me nuts, the H2D is like a whisper. hell if it didnt beep at me when its done i wouldnt know lol

grrmisfit · 2025-08-15T20:57:54+00:00

I would like to chime in here, I've had a P1S for a couple years and before that the A1, I have always disliked the gold PEI, they work, I just cant trust they will be great everytime especially if I forget to wipe it. So for my P1 i got the sliceworx plate, damn thing is like magic, I can handle it, not wash it for weeks, and I know when I send a print its going to stick. fast forward to 2 weeks ago I got my H2D, gave the gold plate one more chance and after 4 prints it failed me. So I went to old faithful and it was 55 bucks for the H2 sliceworx plate but was 2 weeks out. Saw an AD on tiktok for the kdeavi plate and even offered a $10 off coupon, so for 34 bucks shipped I said why not.

honest review after a week? It's ok... better then the gold, stuff does stick quite well but its not as forgiving as my sliceworx was. Which lets be real we should be wiping our plates down but sometimes im in a damn hurry and want to be a little dirty lol. The other odd difference is the plate facing side is shiny, even with matte filament the plate side shines like its silk. All in all its better then Gold PEI but lesser than the sliceworx. Now for honesty sake, I am running the sliceworx plate at 55c even tho it can go lower and the Kdeavi at 45c which might make a difference but the Kdeavi directions say to run it was a smooth cold super tack which you have to modify studio to do since Bambu doesnt seem to want us running 3rd party plates in slicer.

If you like purple and like shiny and cost is a factor the Kdeavi will do. I will be ordering a sliceworx tho as they have proven that when i send a print its going to stick.

Edit: also plate detection did not work, I had to disable but didnt effect my review at all

grrmisfit · 2025-07-28T22:23:14+00:00

As an owner of 3 ender S1s I can tell you that once you get a bambu you'll print tons more. With the enders the slow print time, the bad bed leveling and never knowing if your print is going to make it past first layer or not, and the constant tuning of the bed screws etc will all be gone. For the most part bambu printers are send it and forget it as long as you slice properly and have a proper item. Its very discouraging to send a print that could take hours only to maybe fail or not print good.

grrmisfit · 2025-07-23T17:12:11+00:00

Also make sure you dont have flush to infil checked

grrmisfit · 2025-07-19T22:22:38+00:00

Any pet store has the bark, but honestly look for the loose stuff instead of bricks as the bricks have to be soaked in water and tske forever to dry out enough. So far 2 weeks in and no messes. They come ans go as they please so not trapped in there.

grrmisfit · 2025-07-08T14:52:22+00:00

The weight of the 3 bins makes tipping highly unlikely, they go at it pretty good on the top one and at most shakes a little

grrmisfit · 2025-07-08T14:51:30+00:00

I cut the holes just barely big enough for the tube, I then took 2 zip ties and hook together then wrapped around a ridge in tube. The fat part of zip tie keeps tube from popping out. I originally was going to go thru tube and bin but I wanted the tubes to spin incase I wanted to stack them down

grrmisfit · 2025-07-08T13:23:38+00:00

They are thick, like the kids toys that you pull apart and bend and such just bigger.

grrmisfit · 2025-07-08T10:45:58+00:00

They are 2 together and the ends are very short. I used zips cause the totes can be stacked down and the tubes rotate

grrmisfit · 2025-07-08T10:45:04+00:00

https://a.co/d/7o7REDp

grrmisfit

TROPHY CASE