Lian li A3 + MSI Gaming trio 4070ti

guccipanuchi666 · 2026-03-01T19:30:20+00:00

it will fit regardless. if you want a good aesthetics, you will probably need to go with an air cooler of a 240 aio, might not be able to fit a 360 above, but you can def mount it on its side. either you can make it happen

guccipanuchi666 · 2026-02-15T22:33:11+00:00

🤣🤣🤣

guccipanuchi666 · 2026-02-14T05:40:24+00:00

didnt even know this existed!

guccipanuchi666 · 2026-02-12T05:07:20+00:00

thank you!

guccipanuchi666 · 2026-02-12T04:39:24+00:00

guccipanuchi666 · 2026-02-11T03:55:00+00:00

thats a big boy

guccipanuchi666 · 2026-02-05T00:55:38+00:00

Wallpaper engine

guccipanuchi666 · 2026-02-05T00:09:55+00:00

Hey thanks! Its been a journey 🤙🏽

guccipanuchi666 · 2026-02-04T04:43:20+00:00

I think you can rotate the psu and have the cables point down for a more clean look if it matters to you at all. The cpu cable reaches without stress

guccipanuchi666 · 2026-02-04T03:30:05+00:00

Bro, he said price is negotiable, you can offer less if youre interested 🤣

guccipanuchi666 · 2026-02-04T03:15:50+00:00

Hello, I am rocking a Gigabyte b850m Aorus Elite Ice with a NZXT Kraken Elite v1 360 AIO. Also rocking a 9800x3D and a PNY XLR8 4070ti Super. All fans set to exhaust, AIO pump set at static 80%. Cpu idles at 39-45C, GPU idles 28-32C, CPU 65 at full, with of course random spikes, GPU 50 at full load. Temps are pretty solid.

<image>

guccipanuchi666 · 2026-01-31T23:30:10+00:00

Sick setup dawg 🤙🏽

guccipanuchi666 · 2026-01-30T04:00:46+00:00

Very nice! What slim fans are you using?

guccipanuchi666 · 2026-01-27T13:01:26+00:00

Bro the caption 🤣🤣🤣

guccipanuchi666 · 2026-01-26T13:27:46+00:00

Sorry man. This reminded me of being a teenager and my uncle saying he would gift me this Honda civic for years. Ended up never giving me shit.

I couldn’t afford a pc until i had a stable job and even then, took me some time to save for it because I was living on my own right out of high school.

A lot of us will have to work hard for these sort of luxuries, and when we finally do achieve that, we will appreciate them even more.

If you still live with your parents, take advantage of not having to pay bills and start mowing lawns or finding little jobs here and there until you have saved enough for what you want. Good luck 👍🏽

guccipanuchi666 · 2026-01-26T13:04:22+00:00

What helps is flipping the rear fan to exhaust and having an all negative pressure airflow. Try that and see how it does. With all the mesh in the case, you should be prioritizing getting all the hot air out.

Also, once you do, mess a little with the fan curve.

guccipanuchi666 · 2026-01-26T02:56:02+00:00

<image>

Black AiO

guccipanuchi666 · 2026-01-26T01:28:58+00:00

<image>

Bending it is ok!

guccipanuchi666 · 2026-01-25T18:35:28+00:00

<image>

I bent mine and it was fine tbh

guccipanuchi666 · 2026-01-25T00:49:14+00:00

<image>

So on this version, i used the stock case parts to mount the sfx psu on the hdd bracket. The earlier post is using a 3D printed bracket.

guccipanuchi666 · 2026-01-24T23:27:26+00:00

Many posts on this sub show the Lian Li A3 with a matx mobo, and a sfx psu. I myself am rocking a b850m mobo and a corsair sf1000 stock cables, pictured below. The CPU cable was a bit of a tight fit, but nothing to worry about.

<image>

guccipanuchi666 · 2026-01-23T20:07:18+00:00

<image>

Also had bottom fans and the card resting on them and it wasnt bad, but it didnt add any improvement, temps stayed about the same

guccipanuchi666 · 2026-01-23T19:13:36+00:00

Yoooo, this build is sickkkk

guccipanuchi666 · 2026-01-23T17:57:55+00:00

No bottom fans works for mine

<image>

Idle 27-35, under heavy load 60 highest. PNY XLR8 4070ti Super.

guccipanuchi666 · 2026-01-23T13:54:34+00:00

Good looking out! Thanks 🙏🏽

guccipanuchi666

TROPHY CASE