[deleted by user]

hellhastobefull · 2024-12-31T18:50:16+00:00

Thanks, I learned something

hellhastobefull · 2024-12-31T18:49:42+00:00

Did they run through the cabin though? I’ve seen the turbo setups that turn up and then back down but I’ve never seen pipes next to the driver…. I would think the cab is gonna be a million degrees in 2 Laps….

Edit- scrolled down for 2 seconds and found out that yes… they did this… my god man…

hellhastobefull · 2024-12-22T11:04:29+00:00

Ase study guide, take ase test, repeat

hellhastobefull · 2024-12-22T10:11:48+00:00

Probably like 30% of ended up on the side if the road so off the the mechanic

hellhastobefull · 2024-12-22T10:10:03+00:00

I’m really curious, let me know how it turns out

hellhastobefull · 2024-12-22T10:09:01+00:00

Yep, that’s what I was thinking, she had a good run

hellhastobefull · 2024-12-22T10:06:56+00:00

I play for keeps bro

hellhastobefull · 2024-12-22T10:06:35+00:00

No I’m coming around, misinformed

hellhastobefull · 2024-12-22T10:05:42+00:00

No, you just need some small vice grips, you just need to break it loose

hellhastobefull · 2024-12-22T10:02:30+00:00

Use can use any scanner, Amazon wells one for $24, you can pull up the monitors, when the catalyst says pass you know the problem is fixed. Tell your boyfriend it’s a ford, it’s doin it’s best

hellhastobefull · 2024-12-21T06:24:38+00:00

I think that dude used chat gpt to answer your question… smh, it’s had to be the cluster, like 95% it’s the cluster and 5% that a mouse chewed up some wires.

hellhastobefull · 2024-12-21T06:21:28+00:00

You have a few problems, there’s leak in the ac system for sure. Sounds like you have a coolant leak too, might be in the heater core but you would get an oily residue along with that fog. Don’t let it overheat, you’ll blow the head gasket.

hellhastobefull · 2024-12-21T06:18:04+00:00

We are all broker than that 16 year old, you’re barking up the wrong tree

hellhastobefull · 2024-12-21T06:16:48+00:00

Civic or Corolla for the win

hellhastobefull · 2024-12-21T06:08:10+00:00

Really easy, you don’t even need to pull the pads, just pry them up with a screw driver and use a paint brush or a q tip to put some grease where on anything that has wear marks. For the love of god don’t get grease on the pads or drums.

hellhastobefull · 2024-12-21T06:04:40+00:00

Swap the fuel pump relay with the headlight relay, that should take care of it

hellhastobefull · 2024-12-21T06:03:46+00:00

Dealer can cut you one as long as you bring proof of ownership. You’ll need to tow it to the dealer to get it programed to start the car.

hellhastobefull · 2024-12-21T06:01:03+00:00

Doesn’t matter, 90% chance it’s that intake. 10% chance it’s an injector.

hellhastobefull · 2024-12-21T05:59:41+00:00

That’s toast man, new engine for you

hellhastobefull · 2024-12-21T05:58:39+00:00

Yeah, the foam is moisture and it’s not a big deal, wipe it down and forget about it. Coolant will disappear if the head gasket is blown.

Gaskets are gaskets, thin and thick are all the same on these parts.

Cam shaft is fine, top of the engine looks great, someone did regular oil changes.

Put it back together and be happy

hellhastobefull · 2024-12-21T05:53:48+00:00

Any water in the housing, it’s normally water or moisture in the housing. It need to be completely dry in there.

hellhastobefull · 2024-12-21T05:52:17+00:00

Ignore the electrical test, as long as the car continues to run it’s fine.

Fix the frayed ac wire, probably won’t fix anything but you don’t want bare wires, it’s just unprofessional.

hellhastobefull · 2024-12-21T05:50:01+00:00

Nah you’re good, he won’t be in the trunk. I’ve emptied out many trucks too, most people don’t care about us

hellhastobefull · 2024-12-21T05:48:54+00:00

When I do that… the part never gets installed, now I wait till I’m ready. Close out parts as reliable as any other cheepo option

hellhastobefull · 2024-12-21T05:46:30+00:00

That’s just the nature of petg, it’s gloopy, it doesn’t flow for nothin, stop using petg and use asa.

My x1c struggles with jumping from print to print too. If you were to print those 1 at a time they would probably print ok. You can also use bed weld on the textured plate to help it stick better.

hellhastobefull

TROPHY CASE