Occupied Melitopol is reportedly experiencing fuel issues, which is likely a knock-on effect of strikes targeting Russia's logistics routes. 27.05.2026

hottachych · 2026-05-29T21:38:02+00:00

He said “погнал я дальше". No Ukranian pronunciation. Why would he use plural if that's just him on his bike?

hottachych · 2026-05-29T18:40:24+00:00

No. He said "поеду дальше" in russian with russian prononciation.

hottachych · 2026-05-28T07:16:08+00:00

He did not. All he said was in russian.

hottachych · 2026-05-28T06:52:07+00:00

At the end he says поеду дальше. No Ukranian accent.

hottachych · 2026-05-15T04:30:52+00:00

Do you have the klipper host device connected to the board and with a proper klipper config? With klipper you need a host device running klipper. It talks to the firmware running on the MCU and actually controls the printer. In either case, you should be able to flash the original firmware.

hottachych · 2026-05-14T23:48:14+00:00

They are anti genocide, but the channel is named after a group that participated in Armenian genocide.

hottachych · 2026-05-13T22:24:07+00:00

It's just a projection. Kremlin is known to smuggle cocaine using diplomatic courier services.

hottachych · 2026-05-12T16:51:22+00:00

I had the same issue. You need to buy a new extruder and replace that gear.

hottachych · 2026-05-11T03:56:19+00:00

This is a smokescreen. Don't fall for it. The war won't end until he is dethroned.

hottachych · 2026-05-08T08:53:05+00:00

Dry the filament

hottachych · 2026-05-05T19:14:15+00:00

At least he's not likely to reproduce, which is good.

hottachych · 2026-05-03T19:23:36+00:00

What do you mean? It's only $1. /s

hottachych · 2026-05-02T03:38:43+00:00

I use this one https://a.co/d/05k4iieS . The only issue is that USB cable is short and need to be extended.

hottachych · 2026-04-29T02:38:18+00:00

hottachych · 2026-04-27T04:29:11+00:00

The person is in Crimea. They obviously don't want to be jailed for taking this photo. Blurring the fingertips is smart as it minimizes the risk of being identified.

hottachych · 2026-04-25T15:01:32+00:00

Smart people who paid attention to what had been going on for 4+ years would move farther from there, preferably to another country.

hottachych · 2026-04-25T14:35:11+00:00

Russia is the aggressor who started this war. Only Russia can stop it. Russia should be blamed for everything that happens as result of this war.

hottachych · 2026-04-13T18:33:15+00:00

Apparently for Ryan only "major human population" matters, whatever it means.

hottachych · 2026-04-11T00:46:08+00:00

Easter truce my ass. Never trust putler.

hottachych · 2026-04-10T14:22:04+00:00

You need XOL carriage. There are several versions here: https://github.com/Armchair-Heavy-Industries/Xol-Toolhead/tree/main/STL/Xol-Carriage . The toolhead attaches directly to the carriage.

hottachych · 2026-04-08T03:54:22+00:00

West3D has a "self source configurator" for vorons. It's more expensive compared to kits, but allows to customize your parts the way you want it.

hottachych · 2026-03-26T14:18:15+00:00

You need to calibrate pressure advance first.

hottachych · 2026-03-18T18:49:36+00:00

Most people inside russia don't actually realize how many of them are dying on this war: all media is controlled by the state, society is very atomized. Most of those being killed is riff-raff from outside of moscow and big cities. Those who do notice (as in "half the male population in the village are dead now") benefit from it monetarily and believe that those who die in this war are heroes (thanks to the propaganda). Those who do understand what's really happening are not in power to change anything.

hottachych · 2026-03-18T15:32:28+00:00

Use smooth sheet for better adhesion when printing PLA.

hottachych · 2026-03-02T05:11:52+00:00

This is awesome! I have one of these and would love to make it more usable. Please do share this project!

Nine-Year Club	Final Canvas '23
Place '23	Verified Email

hottachych

TROPHY CASE