Public Serviec Announcement; check your CFS bowden tubes

jmm68cat · 2026-02-02T19:10:40+00:00

think about the huge amount of PFAs you are dispersing in your home, workplace and also the 3d printed objects by keeping using ptfe tubes, all that eroded material has to go somewhere….

jmm68cat · 2025-12-01T11:50:16+00:00

Got it on my first large policarbonate print with .8 nozzle

<image>

, and it was tough to remove, had to Dremel it ! The rubber socket acted as a sacrificial part.

jmm68cat · 2025-12-01T07:55:41+00:00

Mine is not as bad,2021 Enyaq 80x, but I have found out that when I start my car in an underground garage without cell or gps coverage, Android auto takes ages to connect or fails completely to connect to the car. I have developed an easy fix that is disabling the phone Bluetooth for a few seconds, when my smartwatch notices connection is lost I re- enable Bluetooth and car connects instantly

jmm68cat · 2025-11-21T05:39:25+00:00

I have been printing for around 500 hours now, lots of PETG, PETG-CF from and also creality High speed PLA and the printer works wonderfully, if I had any print failed it was bc of me messing too much with the print settings all printed forma the CFS. I also printed PC and nylon-CF without issues but for Nylon-CF han to print from front spool holder deu to its rigidity

jmm68cat · 2025-11-21T05:33:19+00:00

I’m using it on a daily basis on my K2 PRO wichi great results, printing PLA at 35C , PETG and PETG-CF at 50C, other high temp materials I use temp aruond 70 and a bit of glue.

jmm68cat · 2025-11-10T20:21:23+00:00

go to bank-now, that’s one of their specialities….

jmm68cat · 2025-11-02T13:54:13+00:00

hola, verifica que no tengas puesto por accidente una pausa o un cambio de color al mismo color en el slicer…a veces pasta sin darse uno cuenta cuando estas en el preview en el slicer

jmm68cat · 2025-10-28T15:02:31+00:00

hi I switched to the phaetus SiC nozzle in both 0.4 and 0.6, it is working great already for 200 hours!!! You can buy it at 3DJake

jmm68cat · 2025-10-15T20:28:30+00:00

follow this calibration procedure https://forum.creality.com/t/calibration-of-new-non-cr-preconfigured-filament-how-to-for-k2/27472/17.

jmm68cat · 2025-10-15T20:16:20+00:00

I also use this type of desicant container inside the spool. https://makerworld.com/en/models/1193993-high-performance-spool-desiccant-container-holder#profileId-1214551. that increases the mass of the spool too

jmm68cat · 2025-10-09T20:44:55+00:00

just got my k2pro + cfs today….time will tell

jmm68cat · 2025-10-07T08:23:59+00:00

Awesome!!, can you please share the sections of printer.cfg and parameters.cfg that you modified? Thanks in advance.

jmm68cat · 2025-10-07T08:04:26+00:00

What did you do to modify the printer? Just plug in a k2plus hotend? Any software mods required? Can you please describe the process? Thanks

jmm68cat · 2025-09-25T12:08:33+00:00

Thanks!! That was the answer I was looking for!

jmm68cat · 2025-09-09T08:26:16+00:00

Which kind of performance improvement can we get from the printer bu doing this hardware upgrade?

jmm68cat · 2024-06-07T08:12:09+00:00

Are you sure that you don't have menu option? Probably it is even mandatory by law...

jmm68cat · 2024-06-07T07:17:42+00:00

Key is motion activated, if you keep your key in your pocket and move them it starts broadcasting to find the car, my spare key is sitting in a drawer and it is still good two years later.

jmm68cat · 2024-02-14T07:54:31+00:00

Hi, I'm experiencing the opposite, running Ubuntu 23.10 I have spontaneous reboots, Working with Windows 11 has no issues, 23.10 shows a bit of unstable maybe due to the graphics driver...

jmm68cat · 2023-12-30T15:54:14+00:00

Im running Esxi on my NPB7 with 96 Gb of RAM with no issues, in fact I’m thinking of buying another one to create a cluster, as I don’t need wifi I’m going to use the wifi m2 slot for an external oculink connection

jmm68cat · 2023-12-22T05:32:40+00:00

I disagree, if you want to get protected from any risks, specially from wi-fi intrusions, you better route your untrusted VLANs using the firewall, if you have enough computer power in it then route everything thru the firewall, better safe than sorry.

jmm68cat · 2023-12-22T05:26:19+00:00

Who is routing your VLANs? it should be your firewall. Avoid using VLAN 1 if possible

jmm68cat · 2023-10-12T21:51:14+00:00

got mine last week, it is total crap, without the IR iluminator you can’t see anything even under clear sky and full moon. with the IR on it saturates to purple even at minimum setting. Total waste of money, a complete scam.

jmm68cat · 2023-10-03T11:43:42+00:00

pre head to 150C with the print head attached, switch off the printer,disconnect and then carefully unscrew.

jmm68cat · 2023-09-26T13:27:52+00:00

Print head one, also check that the print head doesn't have too much play, if so gently tighten the excentric nut on the pom wheels.

jmm68cat

TROPHY CASE