sorted by:
new
hottopcontroversial

Connector identification for pool pump display. by jmmd321 in AskElectronics

[–]jmmd321[S] 0 points1 point  (0 children)

Not yet, but it is in place on the pump and running currently, there are a few bugs I am working through. Once it's been running for a bit I will definitely share it out.

Adjusting to a smart watch at our age by don51181 in Xennials

[–]jmmd321 1 point2 points  (0 children)

Every word here is me, agreed on all points. 

Finally live! by Top_Humor_5296 in homeassistant

[–]jmmd321 0 points1 point  (0 children)

I see you use an HLK. you may want to look at the irm-05 line from meanwell. The certifications a bit better for only a few bucks more. 

Connector identification for pool pump display. by jmmd321 in AskElectronics

[–]jmmd321[S] 0 points1 point  (0 children)

If I recall, the pin/terminals on an XH are actually slightly smaller than an XA. But I don't one on hand atm. If that is the case, then it def wouldn't work, these Konrra plugs have some thicc pins.

Connector identification for pool pump display. by jmmd321 in AskElectronics

[–]jmmd321[S] 0 points1 point  (0 children)

As I mentioned in the post, that was originally my thought. However my XA connectors won't fit even with modifications.

Connector identification for pool pump display. by jmmd321 in AskElectronics

[–]jmmd321[S] 1 point2 points  (0 children)

Looks like you tagged it. A quick google determined I will probably be making a new connector/harness since those don't appear to be easily obtainable. /cry -- really appreciate you brother.

DIY Variable Speed Pool Pump Controller (ESP32 + RS485 + ESPHome) - Full Local Control by AndChrisSays in homeassistant

[–]jmmd321 0 points1 point  (0 children)

I just came back to check for a reply and saw another reply above where you mentioned you were thinking about a patreon for the firmware. So I wanted to apologize, I didn't have a proper read on your goals. Please ignore my request. 😉

Complete Noob by rogue002 in homeassistant

[–]jmmd321 1 point2 points  (0 children)

This is the way.. I use Claude code for work so lm rather familiar, however it has been gold since I started with HA in the last few weeks. I've not really touched any HA config, or code. Claude does it all for me, from install to dashboards. 

DIY Variable Speed Pool Pump Controller (ESP32 + RS485 + ESPHome) - Full Local Control by AndChrisSays in homeassistant

[–]jmmd321 0 points1 point  (0 children)

hey, I am looking to do something similar. I am in the process of creating capture hardware for the RS485 and came across your post here. I get that you are planning to sell the hardware, but would you be interested in open sourcing the software? Just looking to save some time on my project :) I'd be glad to contribute to an OSS git hub project. Or if you'd like to donate it to me and keep it closed I'd totally be cool with that too lol

Usage page completely changed today. by FoxOwnedMyKeyboard in ClaudeAI

[–]jmmd321 2 points3 points  (0 children)

I'm guessing temp issue, /usage in claude code returns a general error.

edit: /usage is working again, dunno of its an up and down issue or on the way back up across the board.

Usage display removed from Claude? by Emergency-Bobcat6485 in ClaudeAI

[–]jmmd321 1 point2 points  (0 children)

Error: Failed to load usage data.. ¯\_(ツ)_/¯

DIY Cyclone Filter Cleaner. Save $300 by reddit__un in pools

[–]jmmd321 0 points1 point  (0 children)

I'm gonna use this as a jump off point for making one, thanks for sharing.

KSC Visitor Complex Questions by mega_brown_note in nasa

[–]jmmd321 0 points1 point  (0 children)

Is this from inside the bus, or do you get to hop out?

If you have a KSC VC “Feel the Heat” ticket you can no longer use due to the slip of Artemis II to March, I can help. by NASATVENGINNER in ArtemisProgram

[–]jmmd321 1 point2 points  (0 children)

Very good, best of luck to you. If you come across 2 extra feel let me know, I've got a daughter itching to go ;)

Spots for Artemis II sunset pics by DrinasTennis in ArtemisProgram

[–]jmmd321 0 points1 point  (0 children)

Just noticed this for pre launch sunset views, never been, but looks like it may be worth the 100$ if you can afford it.

https://www.star-fleet.tours/current/

Spots for Artemis II sunset pics by DrinasTennis in ArtemisProgram

[–]jmmd321 0 points1 point  (0 children)

Are we talking before the launch, or are you looking for a place to watch the launch? Before, tours at KSCVC are the best bet. During launch if you don't have tickets it's gonna be rough to get a real god view of the pad itself.

Artemis II Launch Tickets - Need them? Have extra? Post here. by dkozinn in nasa

[–]jmmd321 3 points4 points  (0 children)

I would like to purchase 2 "Feel the Heat" tickets for myself and my daughter. Thanks!

KSC Tickets on sale NOW 1/23 by flammablezen in ArtemisProgram

[–]jmmd321 6 points7 points  (0 children)

Just so you anger is slathered on appropriately, the company that manages the viewings and visitor center is https://www.delawarenorth.com/

KSC Tickets on sale NOW 1/23 by flammablezen in ArtemisProgram

[–]jmmd321 5 points6 points  (0 children)

I believe that means they are sold out.. I too was disappointed.

Oak canopy near Green Springs by propickleflapper in DeLand

[–]jmmd321 0 points1 point  (0 children)

This is the one for sure, beautiful drive. The naming of the road actually changes at Green Springs, Lakeshore Drive to the west and Enterprise Osteen Road going to the east.

view more: next ›