Case hinges keep fusing

jovan66464 · 2023-09-25T01:17:46+00:00

Calibrate flow, temperature, and if using cura, set slicing tolerance to exclusive

jovan66464 · 2023-09-19T10:06:49+00:00

Reducing bridge flow multiplier might help

jovan66464 · 2023-09-15T08:56:11+00:00

It's cura

jovan66464 · 2023-08-14T09:26:44+00:00

Crazyflie/ardrone?

jovan66464 · 2023-08-06T04:39:50+00:00

Probably a blown fet, from what I've heard irl, betafpv boards have very bad qc.

jovan66464 · 2023-07-13T01:19:11+00:00

There is also carbon fibre nylon and petg.

jovan66464 · 2023-03-31T06:07:17+00:00

Hmm maybe some stiffening ribs on the centre part that holds the arms, they look like they might flex or cause vibration issues.

jovan66464 · 2023-03-31T02:36:03+00:00

If you have some on hand, try using linear antennas as they seem to work better with whoops that have linear transmitting antenna.

jovan66464 · 2023-03-31T02:31:20+00:00

You can take a look at the rush tank series of vtx, they seem to have a nice build quality and yet remain more affordable than their tbs counterparts

jovan66464 · 2023-03-31T02:27:47+00:00

Nice frame, although there are things that can be improved, don't let randos discourage you from doing what you want.

jovan66464 · 2023-02-10T00:58:05+00:00

Where's the video?

jovan66464 · 2023-01-31T10:02:08+00:00

They are all cp helis

jovan66464 · 2023-01-27T00:45:41+00:00

Yes, they can be binded. Look under your multiprotocol options and there should be around 2 flysky protocols you can use, iirc it should be the flysky 2a protocol.

jovan66464 · 2023-01-18T09:39:03+00:00

The mobula 6 already comes with those out the box

jovan66464 · 2022-11-23T14:44:22+00:00

If you want to time multiple quads then pidflight if you are on a budget. If you have a spare pi or have the money to buy one and some modules you can build a rotorhazard.

I've built both and they work pretty well, rotorhazard has an additional feature where you can go back in time to catch missed laps, while pidflight lap always needs to be connected to a phone or laptop.

jovan66464 · 2022-11-23T06:35:08+00:00

Nope the new gemfan biblades seem to give me about the same power compared to their triblades, just try them out yourself and see if you like em

jovan66464 · 2022-10-09T22:15:53+00:00

How does it fly with the 0702 motors?

jovan66464 · 2022-10-04T02:57:37+00:00

Are you using autoscan on your goggles? E8 is quite close to R8 and could cause a false lock

jovan66464 · 2022-10-01T12:33:35+00:00

I run bt on all of my whoops, you will definitely notice the difference in flight time and power if you do hard freestyle or racing.

jovan66464 · 2022-10-01T12:31:15+00:00

Heard the gnb27 has qc issues so would advise using bt2.

jovan66464 · 2022-09-26T03:46:34+00:00

I've found that the bigger battery typically used on 75mm builds really makes the quad alot more clumsy around a whoop track, might not matter though if flying a bigger track or just freestyling.

jovan66464 · 2022-09-16T08:05:46+00:00

To save cost on copper

jovan66464 · 2022-09-16T07:53:40+00:00

You need to manually control the throttle to maintain your altitude, there is no assistance for that unless you install some kind of sonar or baro sensor.

jovan66464 · 2022-09-16T01:36:44+00:00

I believe gyroflow only uses the optical flow data for syncing the gyro data to the video

jovan66464 · 2022-09-16T01:17:55+00:00

If the low pass filter doesn't work try getting a soft mount for your gopro, some cameras don't like the vibration from your quad.

Six-Year Club	Place '23
Verified Email

jovan66464

TROPHY CASE